Professional Documents
Culture Documents
CONTACTS
Technician : Kevin J. Besana Phone: +63 2 784 9400 Local 710 Email : kevin.besana@sgs.com
Focal Point: Jhaymar T. Forcadilla Phone: +63 2 784 9400 Local 710 Email : jhaymar.forcadilla@sgs.com
DIAGNOSIS
Physical properties of the oil sampled still within normal acceptable limits.
GRAPH
Physical Test Physical Test
35.0 1.4 0.5
30.0 1.2
0.4
25.0 1.0
15.0 0.6
0.2
10.0 0.4
0.1
5.0 0.2
20 4
15 3
10 2
5 1
0 0
05-Aug-19 09-Nov-19 25-Jun-20 12-Aug-20 09-Nov-20 17-Feb-21 05-Aug-19 09-Nov-19 25-Jun-20 12-Aug-20 09-Nov-20 17-Feb-21
Silicon (Si) Sodium (Na) Potassium (K) Lithium (Li) Aluminum (Al) Chromium (Cr) Copper (Cu)
Iron (Fe) Lead (Pb)
Page 1 of 2
OIL CONDITION MONITORING REPORT
TEST DETAILS
Laboratory Sample Number 285.037 406.015 164.025 228.027 312.015 049.016
Sampling Date 05-Aug-19 09-Nov-19 25-Jun-20 12-Aug-20 09-Nov-20 17-Feb-21
Date Received 08-Aug-19 13-Nov-19 26-Jun-20 03-Sep-20 18-Nov-20 19-Feb-21
Date Released 19-Aug-19 20-Nov-19 14-Jul-20 15-Sep-20 02-Dec-20 09-Mar-21
Lubricant Used Tellus S2 V32 Tellus S2 V32 Tellus S2 V32 Tellus S2 V32 Tellus S2 V32 Tellus S2 VX32
Oil Life (Hrs/Km) 8,664.00 9,697.70 11,218.70 11,749.50 12,645.59 Not Indicated
Top Up Volume (L) 10.00 3.00 Not Indicated Not Indicated Not Indicated Not Indicated
REMARKS:
1. Analysed using ASTM D7279. Reported value is the ASTM D445 predicted value obtained through addition of calculated bias in between ASTM D445 and ASTM D7279.
S9 - Subcontracted to another SGS ISO 17025 Laboratory - SGS Cebu
The results shown in this test report specifically refer to the sample(s) tested as received unless otherwise stated. All tests have been performed using the latest revision of the methods indicated, unless specifically marked
otherwise on the report. Precision parameters apply in the determination of the above results. Users of analytical results, when establishing conformance with commercial or regulatory requirements should note the full
provisions of ASTM D3244, IP 367 and ISO 4259 in that context, the default confidence level of petroleum testing having been set at the 95% confidence level. Your attention is specifically drawn to Sections 7.3.6., 7.3.7
and 7.3.8 of ASTM D3244. With respect to the UOP methods listed in the report below the user is referred to the method and the statement within it specifying that the precision statements were determined using UOP
Method 999. This Test Report is issued under the Company’s General Conditions of Service (copy available upon request or on the company website at www.sgs.com). Attention is drawn to the limitations of liability,
indemnification and jurisdictional issues defined therein. This report shall not be reproduced except in full, without the written approval of the laboratory.
Reported by Certified by
Page 2 of 2