Professional Documents
Culture Documents
XENONS
X8126 SERIES
User Manual
V1.0
· Every effort has been made to ensure the accuracy of this manual,
so if you find anything wrong or being omitted, please contact us
immediately, and we will be very appreciate!
· Company shall not be liable for any errors or for direct or indirect
incidental or consequential damages in connection with the error
operation.
XENONS Corporation
Statement
This product is A-class printer which may result in radio-
interference, when it happens, please take measures.
Tables of Contents
User instruction……………………………………………………………………..1
Safety instruction…………………………………………………………………...2
Labels on printer…………………………………………………………………....5
Package contents……………………………………………………………………7
1.Accessories………………………………………………………………………7
2.Rotary cylinder and machine installation………………………………..............8
3.Installation precaution……………………………………………………...........11
4.Cartridge installation……………………………………………………….........13
Parts name…………………………………………………………………………..16
Operation panel……………………………………………………………………..18
Preparation for operation………………………………………………………........19
Key panel buttons function…………………………………………………….........19
1.ORIGIN………………………………………………………………………….19
2.PRINT QUALITY……………………………………………………………….20
3.CLEANING…………………………………………………………………...…21
4.MENU……………………………………………………………………………22
5.PAUSE…………………………………………………………………………...25
6.CANCEL………………………………………………………………………...25
Printhead calibration…………………………………………………………….......26
Print adjustment……………………………………………………………………..31
1.Bi-direction adjustment…………………………………………………….........31
2.Double head position calibration…………………………………………...........33
Maintenance…………………………………………………………………………36
1.Print head maintenance………………………………………………………......36
2.Change cartridge………………………………………………………………....37
2.Handle waste ink………………………………………………………………....39
3.Clean machine………………………………………………………………........40
Menu List and direction………………………………………………………….......41
User instruction
Hardware:
CPU:3.00GHZ
Memory:4.00GB
Mother board:P68
Chipset:INTEL
Software:
WINXP-SP3
MICROSOFT WINDOWS XP PROFESSIONAL
1
Safety introduction
Marks of warning and caution
Various marks
Reminder mark, please refer to the figure under the mark for details ,the example on the
left stands for electrical shock damage
'Never-do-it' mark, please refer to the figure under the mark, the example on the left stands
for never- disassemble-it
'must-done' mark, please refer to the figure under the mark for details ,the example on the
left stands for plug need to be pulled out
Can not be disassembled,repaired or Please use the power with the Rated value
refitted. which labeled on the printer.
Otherwise it may cause fire or other Using any other power will cause fire or electric
damage. shock。
Earthing by connecting the ground wire. When it is in error state, do not use any other
power supply which may cause fire or electric
Otherwise electric shock may be caused. shock.
2
Do not use this printer under the following Do not put cartridge, cleaning solution or waste
environment: open fires,electric spark, static inks under the following environment:
electricity,high temperature or any place
close to heat. Otherwise it may cause fire.
· close to open fires
· high temperature
Otherwise it may cause fire. eg: any place close to heat
Keep your working environment well ventilated. Do not drop any ink or cleaning solution on your
skin or eyes. Do not eat, drink, smell the ink and
Otherwise it may affect your health or cause cleaning solution.
fire.
All these behaviors are harmful to your health.
If the ink or cleaning solution is splashed into If ink or cleaning solution is splashed onto your
your eyes, wash your eyes immediately with skin, please wash your skin with water or soap
plenty of water at least 15 minutes and get immediately.
medical attention. If you feel burning pain or inflammation, plz
immediately get medical attention.
Get medical attention immediately if you have If you feel bad while smell the ink or solution,
any ink or cleaning solution by mistake. please go to the place where is well ventilated.
If feel dizzy or blurred, please get medical
attention immediately.
Collect the waste ink via our waste-ink- Keep the cartridge away from children.
collecting bottle, or kinda of such containers:
metal, poly containers with cover tightened.
Do not use broken or loose plug power supply. Do not pull in or pull out the plug while your
hands are wet.
Otherwise it may
Otherwise fire or
cause fire or electric
electric shock may
shock.
occur.
3
Do not damage or modify the power cord, and When pull out the plug please seize hold of the
do not over fold, twist, pull, bend or pinch the plug not the power cord, otherwise plug might be
power cord, even put heavy items on it. damaged and fire or electric shock may occur.
Keep the machine away from liquid, metal or Suggest at least 4 people should take part in the
inflammable materials process of tearing-off package, assembling or
moving the printer.
As all these things Otherwise the printer mightl fell off or broken.
might cause fire.
Install it on the flat floor to avoid roller falling Fix this printer on its stand via connecting nut
off or damage. to avoid roll falling off or damage.
When put the printer on its stand please take Unlock the castor before moving the printer.
care of your finger, to avoid pinch harm
Otherwise it might cause damage.
The roll should be positioned on its Do not put your hands into printer during printing.
predetermined place. Otherwise the roll may
Otherwise you'll be hurt.
4
Labels on the printer
All the labels have been pasted on on the surface of the
printer.
Cartridge
Keep the ink and waste ink away from open flame.
5
Inner outlook of front cover
The carriage will stop for emergency when you open
the cover during printing. If you want to stop printing,
please press “PAUSE” .
Printhead model
Circuit section,plz do not discharge
Besides WARNING and CAUTION labels, there're also other labels as below:
Notice: Providing you the info to prevent printer failure and ensure right operation.
6
Package content
1 Accessories
Accessories checking
MICO
LOR
Ink cartridge:
FS-3.2 Cooling fan:1 RIP software:1 O-ring:4
4(single head),
8(double heads)
7
2 Cylinders and machine installation
Suggest at least 4 people take part in the Do not put your hands inside printer during
process of tearing-off package, assembling or printing operation.
moving
Otherwise damage
Otherwise the printer might fell off or broke. will happen.
Fix the side panel to the support with the connecting screws
Back view of Left hand side Back view of righ hand side
NOTICE
When move the machine, Do not
hold the positions as the right picture
showed. Otherwise, the machine
will be damaged.
Feeding cylinder,much
thick,black color.
8
Place the side panel rightly, let the castor face
2 down, put the cylinder on the supporting block
Take-up cylinder,black color
3 Lock the screws between the side panels, and the screws btween side panels and stands.
Use the screws to fix the waste ink recycle device onto
the stands
9
Install the waste ink bottle directly into
6 the device, at the lower right side.
We offer an extra waste ink collecting box for temporary waste ink collection.
10
3 Installation precaution
CAUTION
Suggest at least 4 people should take Install it on the flat floor to avoid falling
part in the process of tearing-off down or damage.
package, assembling or moving the
printer. fell off or break.
NOTICE Make sure the waste ink collecting box has been fixed before power on.
11
Connect
Please use the same power as indicated on the Use ground to plug the machine and the land
machine
Use any other power could result in fire or If n o t, It may cau s e electric s ho ck o r
electric shock. mechanical failure.
NOTICE Before connecting the cables, make sure that the computer and the device's main power is
off.
Connect the power cord, the computer's I / O cable securely, and make sure it does not
come loose.If not connected, it will not work properly or cause damage.
Line up the power cord and cable,to avoide people tripping when walk around the device
USB interface
12
4 Install cartridge
Do not use it where have open flames, sparks, Don’t put cartridge, flush or waste ink
static electricity or high temperatures,such as in the following environments:
the place near the heat environment.
Don’t put the not dry printed media in these · near from the open flame
environment. · high temperature
such as the place near the heat
Otherwise it will cause fire.
· Close to bleach, chemicals, flammable and
explosive materials, etc.
Pls keep ventilation in working environment. Do not let ink or flush splash in the eyes or
on the skin.Don’t
Otherwise it will harm to health or cause fire. drink or smell ink and flush
NOTICE Do not use other ink. Do not fill ink into empty cartridge.
The best ink usage and storage temperature is 15-25 ℃, avoid direct sunlight, It may reduce
the print quality if using at below 5 ℃ or above 30 ℃ environment
If ink icing or a long time in high temperature environments (such as long-distance transport in
summer), pls make sure the ink in a normal temperature environment for 24 hours, naturally
thawed or cooled to normal temperature before using it.Don't use other ways,such as heating.
Otherwise it will reduce the ink quality, reduce print quality.
In activities which many contact with the ink,such as adding ink, ink road testing and overhaul
the pump stack group,Pls wear safety equipments.Such as plastic gloves, protective glasses,
etc., in order to avoid personal injury.
Inks contain chemicals, please keep it beyond children's reach, Pls properly handle waste
ink and not be thrown away anywhere, to avoid to pollute the environment or cause harm to
others.
If the cartridge was hurled and shaked, it may cause damage to the cartridge, do not continue
to use this cartridge
Please install and unplug the cartridge gently, It will cause overflow of the ink from the cartridge if
rapid move.
Once the cartridge is installed, don’t pull it down until it runs out.It causes air enter to the ink tube if insert or
pull down the cartridges frequently,It will occur ink breaking or reduece the print quality.
13
NOTICE You just can use our company’s ink,Pls don’t use other company’s ink.
2 Connect the power cable,USB date cable and install the driver.
4 You should buy 3 units flush when you install the ink cartridge the first time.After draining the ink during
shipping,It needs flush to reinstall the cartridges again.
Cartridge slot
8 colors Llk Lk Lm Lc Y M C K
Dual 4 colors Y Y M M C C K K
14
Cartridge slot
Ink
Dual 4 colors Y Y M M C C K K
15
Name of parts
Front view
NOTICE If the printhead is in the air for a long time,(such as:open the front cover and stop the head
in the middle during printing)will cause block of printhead.It will occur damage without
recover.
If the carriage is not in the maintain station,Pls press [ENTER] to reset automatically.
2 Front cover
If you open the front cover during printing,the
printer will be stop urgently.
3
Operation panel
6 Fan system
16
Right view
Notice:If there are other abnormal problems,such as abnormal noise,pls contact with your dealer.
Or consult them from our website.Please don’t deal with it by yourself.
17
Operation panel
Display
Multi-setting menu
and infos here
CLEANING PAUSE
TEST ORIGIN
MENU ENTER
18
Prepare for power on
READY
BP 0mm BI-DIR
NOTICE Before printing,please set the Origin position,Use [ ]and [ ] to set the position of carriage, Press
[BASE POINT] to set ORIGIN position of carriage,The screen will show the coordinate values.
Set the position of carriage firstly, as below: Then press [BASE POINT]to set the ORIGIN
position.
LEFT RIGHT
BASE POINT
19
Printing quality
ENTER to comfirm。
PRINT QUALITY
PRINT QUALITY BI_DIRECTION ENTER
3.Press [ ] to enter ECLOSION menu,press 4.Press[ ]to enter PICSPACE interface, press
[ ] and [ ] to display the ECLOSION mode, [ ] and [ ] to set its value,press ENTER
press ENTER to confirm. to confirm
QUALITY QUALITY
ENTER ENTER
ECLOSION NONE PICSPACE 0mm
MEDIA OVERWRITE
PP ENTER 1 ENTER
20
PRINT HEAD
1.Press [CLEANING] to show cleaning interface, use[ ]and[ ]to show [START]/[TEST PRINT]/
2.Press[ ] enter test printing interface, use[ ]and[ ]make the choice of B and C,.press[ENTER]to
ENTER
If disconnection or other phenomena make bad print quality, pls clean the printhead.
3.Press[ ]enter inkfill interface, press [ENTER] start inkfill, press again [ENTER] to stop fill, then auto
AUTO CLEANING
PASSNUM 10 ENTER
21
Testing
Menu
1.Before printing, set the print paper and print direction and calibrate through test print.
Print quality depends on the print mode, select the print mode suited to the requirements.When computer
can set print mode, then the computer
‘s setting is a priority.
VERTICAL:
Fan setting:
use and to set the
temperature
22
1.Press[MENU] to enter menu interface, press [ ] to select the submenu.Press [ ] to enter the submenu.
MENU
MENU
SHEET TYPE
2. Press[ ]to choose [SHEET TYPE],press[ ]to make the selcet of OPEN和OPAQUE,then
3.In menu interface, press [ ] enter [BIDIRECTION] submenu, press [ ] and [ ] choose calibration
options, press [ ] to enter, press [ENTER] to confirm, press [ ] back to previous menu.
MENU BIDIRECTION-------1
BIDIRECTION TEST PRINT B
4.Enter [HEAD ADJUST] submenu, use [ ] show printhead calibration option, press [ ] back to
previous menu.
HEAD ADJUST
HORIZONTAL
5.Enter [TEMPERATURE] submenu, use [ ] to choose and set front, middle and rear temperature.
T 41 50 50 ENTER
45 OFF OFF
FAN SETTING
HIGHT ENTER
7.Enter [PARAM SETTING] submenu, use [ ] to choose hold parameter or input parameter.
PARAM SETTING
ENTER
SAVAPARAM
23
2.When printing, can press [MENU] for heating step and temperature adjusting.
1.Press [MENU] to enter MENU interface. 2.Use [ ] and [ ] change to heating temperature
Use [ ] and [ ] choose step adjustment and setting interface, use [ ] to set the heating
heating temperature adjust. temperature, press [ENTER] to confirm.
Use [ ] and [ ] for calibration value setting,
press ENTER for confirm.
T 58 16 18
MENU-VERT OFF OFF OFF
ADJUST +0
24
Pause printing
Notice If pressed [PAUSE] to pause printing, then print quality may be different between pause before and after.
It is better to avoid pause when printing.
PAUSE PAUSE
Cancel
Notice When printing, click this button to cancel the order, that is to cancel the current printing. When carrier
stopped, the screen will displays READY state. In READY status, press [CANCEL] will start the
cleaning function. Press [CANCEL] cancel the print job, then the print can not be restored.
CLOSE MACHINE
CANCEL CANCEL YES/NO
When in READY state, press CANCEL, the carrier When cleaning finished, press
will remove the original position, at the same time [ENTER] to turn off cleaning
cleaning function starts. At this time, fill clean fluid function.
into service station cap to clean ink tube.
25
Print head alignment
26
Loosen the screws on both sides of the
4 carrier plate, toggle up and down the carrier
chassis to adjust print head front and rear
height.
MENU
HEAD ADJUST
MENU
[VERICAL ADJUSTMENT] HEAD ADJUST
7 C h o o s e [ V E RT I C A L ] u n d e r [ H E A D
ADJUST], press [ ] enter menu of vertical
calibration, press [ENTER] to start print a test
HEAD ADJUST
strip.
VERICAL
VERICAL
TEST PRINT B
27
Test result as the right side picture will be
8 printed out.
HEAD1
HEAD2
1 2
*Reference*
If the upper lines are on the right side of the lower part, then
turn print head clockwise.
If the upper lines are on the left side of the lower line, then
turn print head anticlockwise.
28
10 Print test picture again till the print head vertical
alignment is good.
HEAD ADJUST
HORIZONTAL
HORIZONTAL
TEST PRINT B
29
Post press [TEST] key, the test strip will be
14 printed as shown.
1 2
*Reference*
When the two test pictures have overlap on left side and gap on right side, then loosen 1 screw and
tighten 2 screw.
When the two test pictures have gap on left side and overlap on right side, then tighten 1 screw and
loosen 2 screw.
30
Print Adjustment
Bi-directional Calibration
* Only the print direction in [PRINT QUALITY] set in [BI-DIRECTION] can be used.
This adjustment is for bidirectional printing offset adjustment.
When replaced material or adjusted the print head height, then it is necessary to carry out this operation.
MENU
MENU BIDIRECTION
7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5 6 7 8 9 10
No deviation values
4.Check the results of the test print on the right and select a no deviation value, note that “+””-”,
in this case no deviation value is “+2”.
5.Press [ ] key to enter mode 1 interface, press [ ] enter the initial adjustment interface.
BIDIRECTION-------1
ADJUST +7
31
6.Use [ ] key to add or deduct step 4 selected value to the step 5 value, then press [ENTER] to
BIDIRECTION-------1 BIDIRECTION-------1
ADJUST +7 ADJUST +9 ENTER
7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5 6 7 8 9 10
No deviation values
8.Check the result of the test print on the left and select a value without bias, in this case without
deviation value is “0”.
BIDIRECTION---------1
L_ADJUST 3/8
Press [ ] to adjust value.
BIDIRECTION-------1
L_ADJUST 0/8 ENTER
11.Press twice [ ] key to back step 1 interface, continue calibration mode 2, mode 3 and mode H,
32
TWO PRINT HEADS PRINTING
* Two print heads printing calibration is limited to two print heads machines.
This calibration for two print heads from right to left, left to right printing coincidence, and
coincidence calibration before and after printing.
When moving print head or re-install the driver, it is necessary to take this operation.
HEAD1-HEAD2(RL)
MENU TEST PRINT B
2.Press [ ] to choose printing mode from right to left, press [ ] to enter RIGHT_LEFT
HEAD1-HEAD2(RL)
TEST PRINT B ENTER
3.Press [ ] to enter test printing interface, press [ENTER] to start test printing.
Current value
7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5 6 7 8 9
4.Check test printing result on the right and choose a value without deviation, note “+””_”, in this
case without deviation value is “+1”.
33
5.Press [ ] to choose ADJUST, press [ ] to enter adjusting the calibration value, and add step 4
HEAD1----HEAD2(RL) HEAD1----HEAD2(RL)
ADJUST +0 ADJUST +1
7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5 6 7 8 9
7.Check test printing result on the left and choose a no deviation value.
8.Press [ ] to choose L_ADJUST to enter fine tuning interface, use [ ] to change step 8 selected
value.
HEAD1----HEAD2(RL) HEAD1----HEAD2(RL)
L-ADJUST +1 L-ADJUST +2
OVERLAP
TEST PRINT B
34
11.After entering OVERLAP submenu, press [ENTER] to start test printing.
No deviation values
12.Check test printing result and choose the value of line without overlap, in this case without
overlap value is “+1”.
13.Press [ ] to choose ADJUST, use [ ] to change step 14 selected value, and press [ENTER]
to confirm.
OVERLAP 35 OVERLAP
ADJUST +2 ADJUST +1 ENTER
35
Maintenance
Print head maintenance
NOTICE After using the machine, check whether the carrier back to the original point, to ensure that print
head and cap of service station is close together, so that the print head is sealed in the cap of
service station.
When the machine does not work over 4days (including 4days), before placing, put proper
cleaning fluid (drop a small amount of cleaning fluid, fully wet sponge of service station cap,
please do not refill to prevent ink reflux), then push the carrier back to the origin, it is a must to
keep print head and service station cap close tightly closed.
When the machine will not be used for a long time, we suggest to clean the whole ink circuit,
remove print head, after cleaning, the print head should be packed according to standard
encapsulation.
When the machine is not used for a long time and print head is blocked caused by this, you can
try soaking the print head for some time. If condition permitted, you can use ultrasonic cleaning
machine to clean print head. When use ultrasonic cleaning machine to clean print head, 30 seconds
to 1 minute will be better, too long will also caused damage to print head.
Before starting machine, can use eco solvent cleaning fluid to soak print head for a few minutes
and clean, it can ensure print head in good condition and prolong using life.
When the machine will not be used for a long time, then suggest to clean the whole ink circuit,
remove print head, after cleaning, print head should be packed according to standard package
encapsulation.
When the machine is not used for a long time and print head is blocked caused by this, you can
try soaking the print head for some time. If condition permitted, you can use ultrasonic cleaning
machine to clean print head. When use ultrasonic cleaning machine to clean print head, 30 seconds
to 1 minute will be better, too long will also caused damage to print head.
36
Maintenance
Change cartridge
Do not use this printer under the following Do not put cartridge, cleaning solution or waste
environment: open fires, electric spark, static inks under the following environment: close
electricity, high temperature or any place to open fires,high temperature,any place
close to heat. Otherwise it may cause fire. close to heat,or close to bleacher,chemicals or
inflammable and explosive materials, otherwise
it may cause fire.
Keep your working environment well Do not drop any ink or cleaning solution on
ventilated. Otherwise it may affect your health your skin or eyes. Do not eat, drink, smell the
or cause fire. ink and cleaning solution. All these behavior
are harmful to your health.
NOTICE Only use the ink supplied by us! Do not try to fill ink into the empty cartridge.
If ink used up please change to a new cartridge with the same color and same type immediately. If take
off the cartridge please install a new one immediately.
Ink should be stored under the environment of well ventilated, and keep its environment temperature
from -20 to 40℃(-4~104℉).
Please handle with care when install or take off the cartridge.
Do not take the cartridge off until the inks used up. Because when cartridge took off from printer, the air may
come into the ink pipe, and print quality will be reduced.
37
Notice Only use the water-based ink.
Cartridge slot
Ink
Cartidge slot
38
Handle waste inks
Please handle waste inks as following steps when ink reaches the limit level of waste ink collecting box or
you need to move the machine.
NOTICE When take off waste ink collecting box please keep it vertical and do not shake, as it might spatter
out.
Waste ink can not be reused and it contains poisonous compositions. So do not burn or handle it as a
general rubbish.
Do not pour waste inks into sewer or river, otherwise it might cause environment pollution.
39
Cleaning
Notice Before cleaning please turn off the main power switch and unplug the power cord first.
* Turn off the sub power switch first and then turn off the main power switch.
Cleaning pressure plate regularly, because it will affect print quality if it is dirty.
Clean print head with our special cleaning cloth (or cleaning rod) and cleaning solution.
Do not clean or rub print head surface with any materials which might cause irreparable damage.
40
Menu list and directions
Menu list and directions
Press PRINT QUALITY to enter print mode.
PICSPACE Set the distance between picture and paper. PP/Photo Paper/ PP
Light Paper/Vinyl/
MEDIA Set the type of print media. Flex/Other
OVERWRITE
41
HEAD
CLEANING TEST MODE Cleaning under the menu of START until the B
print test is OK. B/C
B,C for options, and B means vertical
42