Professional Documents
Culture Documents
Super-Fast Primer
UZIN PE 280
Dispersion primer with carbon technology for smooth and dense surfaces
Description:
UZIN PE 280 is a film-forming dispersion super-fast primer
for main use on dense substrates. Its special carbon-fibre
technology produces a rough and well-keyed surface which
is ready for levelling work very fast. For interior use.
As a bonding primer:
3 on existing surfaces requiring refurbishment, on well-
Product Benefits / Properties:
bonded, waterproof residues of adhesives or levelling
compounds (e. g. synthetic resin, neoprene, bitumen or UZIN PE 280 impresses by its exceptional speed and ideal
dispersion adhesives) adhesion to the substrate.
3 on dense substrates or substrates with low absorbency Composition: Modified styrol-acrylate copolymers, wetting-
(e.g. stone floors and ceramics, water-resistant coatings, and defoaming-agents, preservatives, carbon fibres, synthetic
epoxy coverings) and mineral aggregates, water.
3 on existing or ungritted mastic asphalt
3 on magnesia- and stonewood screeds 3 Ready to use
3 on epoxy primers (e. g. UZIN PE 460 /480) or on PUR- 3 Film-forming
primers (e. g. UZIN PE 414 Turbo) 3 Ideal bonding agent on dense surfaces
3 prior to levelling work with UZIN cement- and calcium 3 Also suitable for wall applications
sulphate-levelling compounds
3 High-speed construction product
3 on warm water underfloor heating system
3 Solvent-free
3 for exposure to castor wheels in accordance with DIN
3 EMICODE EC 1 PLUS / Very low emissions
EN 12 529
3 for heavy wear in domestic, commercial and industrial
locations
Technical Data:
Packaging: oblong plastic bucket
Packsizes: 5 kg, 12 kg
Shelf life: min. 12 months
Colour wet / dry: ochre
Consumption: 70 – 150 g / m2
Working temperature: min. 10 °C at floor level
Drying time: 45 mins. to 4 hrs.*
* At 20 °C / 68 °F and 65 % relative humidity. See also “Application Chart”.
The above information is based on our experience and careful investigations. The variety of associated materials and different construction and working conditions cannot be indi-
vidually checked or influenced by us. The quality of your work depends, therefore, on your own professional judgement and product usage. If in doubt, conduct a small test or obtain
technical advice. Observe the installation recommendations of the covering manufacturer. The publication of this Product Data Sheet invalidates all previous Product Information.
The respective updated version of this datasheet can be found on our Homepage under www.uzin.com. 12.17 | LD