Professional Documents
Culture Documents
PERFORMANCE CURVES
0 20 40 60 80 100 120 U.S.GPM
H H0 20 40 60 80 100 IMP.GPM
H
(psi) (m) (ft)
32 3450r/min
100
40 28
ATB500 2.2N
24 80
30 20
Head
60
16
20 ATB300 1.1-N
12 40
ATB300 1.5-N
8
10 20
4
0 0
0 100 200 300 400 500 l/min
3
0 3 6 9 12 15 18 21 24 27 30 m/h
Flow
82
SHAPE AND SIZE INSTALLATION DNM
APPLICATIONS:
1. Household pressure boosting system
2. Swimming pool system
3. Industrial liquid convey
4. Air-condition system
258
DNA
H
7. Heating system
8. Convey weak corrosive liquid
9. Farmland irrigation system
4-¦9 108 138 165
10. Drainage system 193 L
TECHNICAL DATA:
Max. Flow: 36m³/hr Single phase: 220V,60Hz Pole induction motor
Max. Head: 29m Three phase: 230/400V, 60Hz
Max. Operating Pressure: 10bar Liquid temperature: 5-90°C
Insulation class: F Inlet bore ATB/N G2 ATB/V Ø 60.3
Protection class: IP55 Outlet bore ATB/N G2 ATB/V Ø 60.3
ATB300 1.1-N 1.1 1.5 378 365 235 G2 16.5 410 x 210 x 325
ATB300 1.5-N 1.5 2 378 365 235 G2 18.0 410 x 210 x 325
ATB500 2.2-N 2.2 3 415 242 242 G2 22.0 445 x 210 x 325
ATK series
SHAPE AND SIZE INSTALLATION
82
DNM
258
DNA
H
125
4-¦9 108 138 165
193 L
PERFORMANCE CURVES
0 20 40 60 80 100 120 140 160 U.S.GPM
H H0 20 40 60 80 100 120 140 IMP.GPM H
(psi) (m) (ft)
35 24 3450r/min
APPLICATIONS:
1. Household pressure boosting system 30 21 70
2. Swimming pool system 25 18 60
3. Industrial liquid convey 15
ATK300 50
4. Air-condition system 20
Head
12 40
5. Wine-brewing and food system 15
9 30
6. Clean system ATK200
10
7. Heating system 6 20
ATK150
8. Convey weak corrosive liquid 5 3 10
9. Farmland irrigation system 0 0
10. Drainage system 0 100 200 300 400 500 600 700 l/min
3
0 4 8 12 16 20 24 28 32 36 40 m/h
Flow
TECHNICAL DATA:
Max. Flow: 50m³/hr Single phase: 220V,60Hz
Max. Head: 21m Three phase: 230/400V, 60Hz
Max. Operating Pressure: 10bar Liquid temperature: 5-90°C
Insulation class: F Pole induction motor
Protection class: IP55
ATK150 1.1 1.5 378 365 235 G2 16.0 410 x 210 x 325
0 2 4 6 8 10 12 14 16 18 20 U.S.GPM
0 2 4 6 8 10 12 14 16 IMP.GPM
H H H
(psi) (m) 3450r/min (ft)
48
ATS750 150
60 ATS1000
40
50 125
32 100
Head
40
30 24 75
ATS550
20 16 50
ATS370
10 8 25
0 0
0 10 20 30 40 50 60 70 80 l/min
3
0 0.6 1.2 1.8 2.4 3.0 3.6 4.2 4.8 m/h
Flow
E
H2
car washing.
4. Air-condition or cooling system,
industrial washing and other especial
¦9 A C D
application.
B L
TECHNICAL DATA:
2-pole induction motor Liquid temperature: +5°C ~+60°C
Single-phase: 220V, 60Hz Max. Environmental temperature: +50°C
Three-phase: 230/400V, 60Hz Max. Bear pressure: 6 bar
Insulation class: F Max. Suction head: 9 meters
Protection class: IP55
A B C D E F L H H1 H2
kW HP m Kg mm
ATS370 0.37 .50 8 100 170 - 197 128 88 365 195 178 88 G1 7.6 390 x 195 x 235
ATS550 0.55 .75 8 98 184 - 160 148 80 354 228 202 98 G1 9.8 385 x 200 x 280
ATS750 0.75 1 8 98 184 - 160 148 80 354 228 202 98 G1 10.3 385 x 200 x 280
ATS1000 1.00 1.3 8 98 198 80 219 160 97 417 236 212 105 G1 11.8 460 x 215 x 315
ATPA series
PERFORMANCE CURVES
0 20 40 60 80 100 120 U.S.GPM
H H 0 20 40 60 80 100 IMP.GPM
(psi) (m) H
30 21 ATPA300-I (ft)
60
25 18 ATPA250-I
15
20
12 40
15
Head
9 ATPA150-I
10 20
6
ATPA200-1
5 3
0 0
0 100 200 300 400 500 l/min
3
0 6 12 18 24 30 m/h
Flow
ATPA200
ATPA250 LX
ATPA300
332
310
281
234
136.5
APPLICATION:
Jet pump for jetted bath tubs, spa
pools, swimming pools massage 178 373
stations, cleaning systems 230 L
TECHNICAL DATA:
2-pole induction motor Liquid temperature: +5°C ~+60°C
Single-phase: 220V, 60Hz Ambient temperature up to +50°C
Capacitor insert Max. Working pressure: 2.5 bar
Insulation class: F
Protection class: IP55
Filter
Filter
Power QMAX HMAX Basket Weight Packaging Size
Size
Model L Volume
kW HP L/min m mm L Kg mm
ATPA150-l 1.10 1.5 390 15 617 60.3 / 63 2.5 14.0 655 x 305 x 390
ATPA200-l 1.50 2.0 470 18 617 60.3 / 63 2.5 15.5 655 x 305 x 390
ATPA250-l 1.85 2.5 490 19 617 60.3 / 63 2.5 16.5 655 x 305 x 390
ATPA300-l 2.20 3.0 560 22 617 60.3 / 63 2.5 18.0 655 x 305 x 390
ATJ series
APPLICATION:
It is very good for normal degree water delivery.
The pump widely used in irrigation, industry water
supply, water treatment and home booster.
FEATURES:
ATJ Series is self-priming pump with cast-iron
pump body and inject-aluminum alloy foot. We
choose a high quality mechanical seal, heat
resisting guide vane and injector. We optimize the
design, to shorten the time in self-priming, make it
run smooth; the greatest strengths are high head,
deep lift that the maximum can be up to 10 meters.
ATJ80/100/150
SHAPE AND SIZE INSTALLATION
Outlet
Inlet
192
151
96
145 52
187 418
10 20 30 40 50 10
Power Bore Hs Weight Packaging Size
FLOW
Model
m³/hr
PERFORMANCE CURVES
OPERATION CONDITIONS:
DBM series pump is suitable for non flammable clean
liquid which prevents corrosion of PPO plastic. The
liquid temperature from 0°C to 50°C, max ambient
temperature is 50°C. The maximum working pressure
is 0.6MPa, the maximum input pressure is limited by the
maximum working pressure.
PUMP: MOTOR:
Ÿ Stainless steel pump body Ÿ C & U bearing
Ÿ Stainless steel impeller Ÿ Motor with copper winding
Ÿ AISI 304 shaft Ÿ Built-in thermal protector for
single phase
Ÿ Max. liquid temperature: +60°C motor
Ÿ Max. suction: +9m Ÿ Insulation class: B
Ÿ Continuous duty Ÿ Protection class: IP44
Ÿ Max. Ambient temperature: +40°C
JP370
JP550
JP750
JP920
Max. Rated
Power Phase Voltage Amp Head Suction Weight
Flow Capacity
Model
APPLICATIONS:
CHV4-2DC (PID) Ÿ Household Water Supply
Ÿ Water Supply System
Ÿ Cooling System
WiFi Ÿ Boost System
WORKING RANGE:
App WiFi Platform Control System Constant Pressure High Flow Rate Low Noise
CHV 4 2 DC
Permanent Magnet DC Motor
Impeller Stages
Rated Flow (m³/hr)
Centrifugal Pump Model
CHV4-2DC G1 G1 362 220 120 140 282 96 141 86 394 x 260 x 330 9.7
PERFORMANCE CURVE:
CHV4-3DC (PID)
WiFi
CHV4-3DCW WIFI
SPECIAL FEATURES:
App WiFi Platform Control System Constant Pressure High Flow Rate Low Noise
APPLICATIONS:
CHV4-3DC G1¼ G1 410 220 90 140 282 97 165 128 420 x 260 x 330 11
WiFi
CHV4-2HW WIFI
App WiFi Platform Control System Constant Pressure High Flow Rate Low Noise
WORKING RANGE:
CONTROL PANEL
Constant Pressure
Energy Saving
Low Noise
CHV8-3 DC 1.5" 1.5" 404 200 100 120 595 95 250 200 107 436 x 226 x 336 21.5
PERFORMANCE CURVE:
WZB-DC (PID)
SPECIAL FEATURES:
1WZB-35DC G1 G1 40.5 225.7 196.5 121.5 247 98.8 170.1 138 107.8 13 8 226.8 332 x 337 x 310 10.1
1.5WZB-45DC G1½ G1 53.5 267 206.5 132 257 98.8 170.1 138 106 13 8 243.7 325 x 375 x 345 13.1
Rated H
Power In/Out NPT Current Rated Q Max. Q Suction
/ Max H
Model
kW HP (in) (A) m³/hr m³/hr m m
COMPONENTS:
Permanent Magnet
Controller S.S. Insert
Motor
SPECIAL FEATURES:
WORKING RANGE:
Integrated Design Medium : Clean liquid without suspended solids,
non-aggressive
Constant Pressure
Liquid Temp. : 0°C - 60°C
Adjustable Pressure Ambient Temp. : < 40°C
Max. Pressure : 10 Bar
High Flow Rate Continuous Service : S1
Insulation :B
Energy Saving Protection : IP x 4
Multi-function
Low Noise
Self Priming
Rated H
Power In/Out NPT Current Rated Q Max. Q Suction
/ Max H
Model
kW HP (in) (A) m³/hr m³/hr m m
APPLICATIONS:
HM-11A HM-11 Ÿ Suitable for clean water and salt water.
PERFORMANCE CURVE Ÿ Household use as watering in the garden,
washing car, draining water from basement,
maintenance of ponds and pools, cleaning
boats and marine equipment.
Ÿ Water supply and disposal, water circulation
and water change for crop farming, forestry and
fishery use.
Ÿ Dewatering of basement flood, laundry room,
office building toilet water basin tank drainage,
drain and water transfer.
WORKING RANGE:
MOTOR FEATURES:
Ÿ Single phase
Ÿ Closed externally ventilated
Ÿ Insulation class: B
Ÿ Protection class: IP68
Ÿ Duty: continuously rated
Ÿ Motor with thermal protector
SUBMERSIBLE PUMP
APPLICATIONS:
Ÿ Suitable for clean water and salt water.
Ÿ Water supply and disposal, water circulation and water
change for crop farming, forestry and fishery use.
Ÿ Drain accumulated water for basement residence.
Ÿ Draining of accumulated water for civil and architectural
engineering.
SS-250A SS-250
PERFORMANCE CURVE Discharge Bore 38mm / 1.5inch
Pole 2 Pole
Insulation Class B
Starting
Capacitor Run
Method
Motor
Protection
Repeatable Thermal Protector
Device
PERFORMANCE CURVE
Q 550 B 1
External
Feature code
Sewage pump
Nominal power
Small submersible pump
PERFORMANCE CURVE
PERFORMANCE CURVE
WAF7 21.5
WAF10 21.5
WAF15 22.25
WAF15 1.1 1.5 100 56.5 8 56.5 55 52.5 50.5 48 46.5 44 41.5 39 35.5 -
WAC series
FEATURES:
WAC10 19.69
WAV15 20.5
WAV20 20.25
kW HP L/min m m L/min 0 30 60 120 120 150 180 210 240 270 300
WAC20 1.5 2.0 330 38.5 8 38.5 38 37.5 37 36 35.5 34 32.5 30 27.5 25
WAS series
FEATURES:
WAS7 21
WAS10 21
WAS15 21.65
kW HP L/min m m L/min 0 10 20 30 40 50 60 70 80
WAV7 17.32
WAV10 17.32
WAV15 19.69
WAV20 19.69
Pipe
Suction 1.25 1.25 1.25 1.25
Size (in)
Venture V727 V724 V720 V724 V720 V726 V722 V719 V726 V722 V719
Pressure
Control Valve 40 40 45 62 65 67 76 78 80
Setting (PSI)