Professional Documents
Culture Documents
26). 1 oA=_______.
29). The quantities A and B are related by the relation m = A/B, where A is the
work and B is the volume. The unit of m is equivalent to
(a) Pressure (b) Force
(c) Power (d) Moment of inertia
30). The radius of a ball is (2.5± 0.2) cm. The percentage error in its diameter
is
(a) 11% (b) 24% (c) 7% (d) 8%
31). Of the following quantities, which one has dimensions different from
the remaining three?
(a) Energy per unit volume
(b) Force per unit area
(c) Product of voltage and charge per unit volume
(d) angular momentum per mass
33). If the units of mass, length and time are doubled then unit of
momentum will be
(a) doubled (b) halved
(c) quadrupled (d) remains same
35). If mass (m), velocity (v) are related as X = m(v + y).The dimension of X and Y
are
(a) ML2T–2, MLT–1 (b) MLT–2, MoLT–2
(c) MLT–1, MoLT–1 (d) M0LT–2, MLT–2
1nanometer
37). The ratio of is equal to:
1 picometer
(a) 10-3 (b) 10-12 (c) 10-9 (d) 103
38). Tick the following which contain atleast two fundamental quantities
42). The radius of hydrogen atom in its ground state is 0.53 oA, its value in
micrometer is
(a) 5.3 x 10-5 (b) 5.3 x 10-4
(c) 5.3 x 10-6 (d) 5.3 x 10-10
43). For measurement of electric current through the load, an ammeter is connected
in ____________ with it.
(a) parallel (b) series
(c) either in above (d) none of these
44). The mass of electron is 9.1 x 10-31 Kg, its mass measured without prefix is
(a) 9.1 x 10-31 (b) 9.1 x 10-34
(c) 9.1 x 10-28 (d) 9.1 x 10-25
49). _______ refers to discrepancy between a measured value and true value.
(a) un-certainty (b) error
(c) accuracy (d) all of these