Professional Documents
Culture Documents
http://www.damwand.nl/projects/europe/foundationsolutions/EN/steel_g...
Sitemap
Calculation
NL | EN | FR
Home
Products
About us
References
Information
Steel grades - Sheet piles Hot rolled sections - EN 10248-1 AZ, AZ-R AU, PU, PU-R, AS, HZ and HZM sections are delivered in the steel grades based on EN 10248-1 mentioned below. GU sections are available up to S 320 GP. Other steel grades can be delivered on request.
Standard referred to: EN 10248-1:1995 Minimum yield strength R eH N/mm S 240 GP S 270 GP S 320 GP S 355 GP S 390 GP S 430 GP S 460 AP 240 270 320 355 390 430 460
2
Comparable international standards Minimum elongation USA Canada CSA G 4021 Gr. 260 W Gr. 300 W A 572 Gr. 50; A 690 Gr. 350 W A 572 Gr. 55 A 572 Gr. 60 A 572 Gr. 65 Gr. 400 W SY 390 Japan JIS A 5528
Steel grades Sheet piles Tubes HP piles AutoCad files Calculation Documentation Service
Steel grade
Minimum tensile strength Rm N/mm 340 410 440 480 490 510 550
2
% 26 24 23 22 20 19 17
ASTM
A 328
AMLoCor
Minimum elongation % 23 22 20 C
0.27 1.70 0.60 0.05 0.05 0.011 1.50 0.65 0.27 1.70 0.60 0.05 0.05 0.011 1.50 0.65 0.27 1.70 0.60 0.05 0.05 0.011 1.50 0.65
Some sheet pile sections are not available in AMLoCor steel grade. Click here for more information (PDF, 184 :kB).
Cold formed sections Mechanical properties according to EN 10249-1:1995 and corresponding former national standards. Other steel grades can be delivered on request.
Standard referred to: EN 10249-1:1995 Steel grade S 235 JRC S 275 JRC S 355 JOC Minimum yield strength R eH N/mm 235 275 355
2
Former references
The C in JRC and J0C stands for cold forming aptitude according to EN 10025:1993.
1 of 2
6/1/2012 12:19 PM
http://www.damwand.nl/projects/europe/foundationsolutions/EN/steel_g...
Disclaimer
2 of 2
6/1/2012 12:19 PM