You are on page 1of 36

Quality Certificate No:AJ23070144

Revision number:A

Current Transformer
Quality Certificate

Type: LB7—170
NO.: AJ23070144
Document number: AJ23070144

ABB Jiangsu Jingke Instrument Transformer Co. Ltd.

Address: N0.9 Gucheng Road,Su-Su Industrial Park Suqian,Jiangsu

Province,223800,P.R.China
Quality Certificate No:AJ23070144

Ⅰ. Technical Specification and Standard


Name of Testing Product: Current Transformer
Type of Testing Product: LB7-170
Serial No. of Testing Product: AJ23070144
Equipment Highest Voltage: 170 kV
Rated Current Ratio: 200-300-400/1A
Rated Burden: 20-20-20/20-20-20VA
Accuracy Class: 0.2S FS10/2*5P20
Rated frequency: 60Hz
Short-time thermal current: 40kA/1s
Rated dynamic current: 100kA
Creepage distance: 5270mm
Executive Standard: IEC 61869-2:2012
Ⅱ. Test Item
1、Verification of Terminal Markings: OK
2、Sealing test:
Residual pressure≥0.07MPa under 0.1MPa for 6h. No leakage .

3、Winding Insulation Resistance measured by 2500V Megger


Room Temperature: 30 ℃ Humidity: 75 %

Between primary and secondary winding

and primary winding and earth: ≥3000 MΩ

Between secondary windings

and secondary winding and earth: ≥2500 MΩ

Between earth screen and secondary winding

and earth: ≥2500 MΩ

Page 1 of 5
Quality Certificate No:AJ23070144
4、Inter-turn overvoltage test:
Secondary open circuit voltage
Class Primary Current (A) Time (sec)
peak (V)
1S1---1S4 400 2870 60 sec

2S1---2S4 378 4500 60 sec

3S1---3S3 379 4500 60 sec

5、Power Frequency Voltage withstand Test


Testing items Testing voltage Testing time Result
Between primary winding and
325 kV 60 sec Pass
secondary winding or earth
Between secondary windings or
3 kV 60 sec Pass
secondary winding and earth
Between end shield and
5 kV 60 sec Pass
secondary winding or earth
6、Measurement of capacitance and dielectric dissipation factor:
Room temperature: 30 ℃ Humidity: 75%
U kV 10 49 98 Range

tanδ 0.0030 0.0030 0.0030 ≤0.005

Cx pF 823.15 823.22 823.48 --

tanδ between earth shield and secondary winding or earth: 0.0067 (3kV)
tanδ(standard value)≤0.020
7、Measurement Secondary DC resistance 75℃
Class Ω Class Ω Class Ω

1S1-1S2 1.165 1S1-1S3 2.295 1S1-1S4 3.145

2S1-2S2 2.509 2S1-2S3 4.002 2S1-2S4 5.115

3S1-3S2 2.501 3S1-3S3 3.992 3S1-3S4 5.095

8、Partial discharge measurement:


Pre-stressing voltage 260 kV for 60s.

Test Voltage (kV) 170kV for 30s 118kV for 30 s

Discharge quantity(pC) <8 <4

Page 2 of 5
Quality Certificate No:AJ23070144
9、Error determination: (cosφ=0.8 lag,when the burden is less than 5 VA,
cosφ=1,0 shall be used) Current value 400 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.01 1.1 0.04 0.5


5 0.00 1.3 0.04 -0.1
1S1-1S4
0.2S 20 20 0.01 1.4 5 0.05 0.4 6.54
100 0.01 0.8 0.04 0.7
120 0.01 0.7 0.04 0.7
2S1-2S4
5P20 100 20 -0.14 1.7

3S1-3S4
5P20 100 20 -0.10 0.8

Current value300 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.04 1.5 0.04 0.2


5 -0.02 2.8 0.05 0.6
1S1-1S3
0.2S 20 20 -0.00 2.3 5 0.05 0.8 5.03
100 0.00 0.7 0.05 0.9
120 0.01 0.5 0.05 0.9
2S1-2S3
5P20 100 20 -0.26 2.4

3S1-3S3
5P20 100 20 -0.18 1.0

Current value200 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)
1 -0.10 7.7 0.05 2.0
5 -0.12 6.5 0.05 1.8
1S1-1S2
0.2S 20 20 -0.11 4.6 5 0.05 1.8 3.48
100 -0.03 0.5 0.05 1.4
120 -0.01 0.2 0.05 1.3
2S1-2S2
5P20 100 20 -0.59 3.6

3S1-3S2
5P20 100 20 -0.41 0.8

Page 3 of 5
Quality Certificate No:AJ23070144

10、Volt-ampere characteristic and composite error measurement:


U(V) composite error
S1-S2 S1-S3 (%)
I(mA)
Class 353 398 442 374 421 467 S1-S2 S1-S3
2S 5P20 41.31 47.72 57.28 19.71 21.94 24.23 0.285 0.121
3S 5P20 43.06 49.81 59.34 20.45 22.80 25.19 0.296 0.126
U(V) composite error
S1-S4 (%)
I(mA)
Class 389 438 486 S1-S4
2S 5P20 11.97 13.23 14.48 0.072
3S 5P20 12.39 13.71 15.01 0.075

mA

mA

Page 4 of 5
Quality Certificate No:AJ23070145

Revision number:A

Current Transformer
Quality Certificate

Type: LB7—170
NO.: AJ23070145
Document number: AJ23070145

ABB Jiangsu Jingke Instrument Transformer Co. Ltd.

Address: N0.9 Gucheng Road,Su-Su Industrial Park Suqian,Jiangsu

Province,223800,P.R.China
Quality Certificate No:AJ23070145

Ⅰ. Technical Specification and Standard


Name of Testing Product: Current Transformer
Type of Testing Product: LB7-170
Serial No. of Testing Product: AJ23070145
Equipment Highest Voltage: 170 kV
Rated Current Ratio: 200-300-400/1A
Rated Burden: 20-20-20/20-20-20VA
Accuracy Class: 0.2S FS10/2*5P20
Rated frequency: 60Hz
Short-time thermal current: 40kA/1s
Rated dynamic current: 100kA
Creepage distance: 5270mm
Executive Standard: IEC 61869-2:2012
Ⅱ. Test Item
1、Verification of Terminal Markings: OK
2、Sealing test:
Residual pressure≥0.07MPa under 0.1MPa for 6h. No leakage .

3、Winding Insulation Resistance measured by 2500V Megger


Room Temperature: 30 ℃ Humidity: 75 %

Between primary and secondary winding

and primary winding and earth: ≥3000 MΩ

Between secondary windings

and secondary winding and earth: ≥2500 MΩ

Between earth screen and secondary winding

and earth: ≥2500 MΩ

Page 1 of 5
Quality Certificate No:AJ23070145
4、Inter-turn overvoltage test:
Secondary open circuit voltage
Class Primary Current (A) Time (sec)
peak (V)
1S1---1S4 400 2800 60 sec

2S1---2S4 383 4500 60 sec

3S1---3S3 385 4500 60 sec

5、Power Frequency Voltage withstand Test


Testing items Testing voltage Testing time Result
Between primary winding and
325 kV 60 sec Pass
secondary winding or earth
Between secondary windings or
3 kV 60 sec Pass
secondary winding and earth
Between end shield and
5 kV 60 sec Pass
secondary winding or earth
6、Measurement of capacitance and dielectric dissipation factor:
Room temperature: 30 ℃ Humidity: 75%
U kV 10 49 98 Range

tanδ 0.0031 0.0030 0.0031 ≤0.005

Cx pF 821.65 821.64 821.85 --

tanδ between earth shield and secondary winding or earth: 0.0077 (3kV)
tanδ(standard value)≤0.020
7、Measurement Secondary DC resistance 75℃
Class Ω Class Ω Class Ω

1S1-1S2 1.164 1S1-1S3 2.385 1S1-1S4 3.159

2S1-2S2 2.497 2S1-2S3 3.961 2S1-2S4 5.103

3S1-3S2 2.502 3S1-3S3 4.020 3S1-3S4 5.095

8、Partial discharge measurement:


Pre-stressing voltage 260 kV for 60s.

Test Voltage (kV) 170kV for 30s 118kV for 30 s

Discharge quantity(pC) <8 <4

Page 2 of 5
Quality Certificate No:AJ23070145
9、Error determination: (cosφ=0.8 lag,when the burden is less than 5 VA,
cosφ=1,0 shall be used) Current value 400 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 0.00 1.1 0.06 0.6


5 0.00 1.7 0.04 0.0
1S1-1S4
0.2S 20 20 0.00 1.5 5 0.05 0.4 6.21
100 0.01 0.8 0.04 0.8
120 0.01 0.7 0.04 0.7
2S1-2S4
5P20 100 20 -0.10 0.7

3S1-3S4
5P20 100 20 -0.11 0.8

Current value300 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.02 2.8 0.05 0.2


5 -0.03 2.8 0.05 0.6
1S1-1S3
0.2S 20 20 -0.03 2.4 5 0.05 0.8 4.77
100 0.00 0.7 0.05 1.0
120 0.01 0.5 0.05 1.0
2S1-2S3
5P20 100 20 -0.18 0.8

3S1-3S3
5P20 100 20 -0.18 0.9

Current value200 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)
1 -0.14 7.0 0.03 1.2
5 -0.13 7.2 0.04 1.6
1S1-1S2
0.2S 20 20 -0.12 4.7 5 0.04 1.9 3.31
100 -0.04 0.6 0.04 1.4
120 -0.02 0.4 0.04 1.3
2S1-2S2
5P20 100 20 -0.42 1.1

3S1-3S2
5P20 100 20 -0.43 1.4

Page 3 of 5
Quality Certificate No:AJ23070145

10、Volt-ampere characteristic and composite error measurement:


U(V) composite error
S1-S2 S1-S3 (%)
I(mA)
Class 353 398 442 374 421 467 S1-S2 S1-S3
2S 5P20 41.85 48.42 58.03 19.91 22.18 24.51 0.289 0.122
3S 5P20 41.40 47.79 56.84 19.76 21.99 24.28 0.283 0.121
U(V) composite error
S1-S4 (%)
I(mA)
Class 389 438 486 S1-S4
2S 5P20 12.07 13.35 14.62 0.073
3S 5P20 11.99 13.26 14.51 0.072

mA

mA

Page 4 of 5
Quality Certificate No:AJ23070146

Revision number:A

Current Transformer
Quality Certificate

Type: LB7—170
NO.: AJ23070146
Document number: AJ23070146

ABB Jiangsu Jingke Instrument Transformer Co. Ltd.

Address: N0.9 Gucheng Road,Su-Su Industrial Park Suqian,Jiangsu

Province,223800,P.R.China
Quality Certificate No:AJ23070146

Ⅰ. Technical Specification and Standard


Name of Testing Product: Current Transformer
Type of Testing Product: LB7-170
Serial No. of Testing Product: AJ23070146
Equipment Highest Voltage: 170 kV
Rated Current Ratio: 200-300-400/1A
Rated Burden: 20-20-20/20-20-20VA
Accuracy Class: 0.2S FS10/2*5P20
Rated frequency: 60Hz
Short-time thermal current: 40kA/1s
Rated dynamic current: 100kA
Creepage distance: 5270mm
Executive Standard: IEC 61869-2:2012
Ⅱ. Test Item
1、Verification of Terminal Markings: OK
2、Sealing test:
Residual pressure≥0.07MPa under 0.1MPa for 6h. No leakage .

3、Winding Insulation Resistance measured by 2500V Megger


Room Temperature: 30 ℃ Humidity: 75 %

Between primary and secondary winding

and primary winding and earth: ≥3000 MΩ

Between secondary windings

and secondary winding and earth: ≥2500 MΩ

Between earth screen and secondary winding

and earth: ≥2500 MΩ

Page 1 of 5
Quality Certificate No:AJ23070146
4、Inter-turn overvoltage test:
Secondary open circuit voltage
Class Primary Current (A) Time (sec)
peak (V)
1S1---1S4 400 2770 60 sec

2S1---2S4 379 4500 60 sec

3S1---3S3 382 4500 60 sec

5、Power Frequency Voltage withstand Test


Testing items Testing voltage Testing time Result
Between primary winding and
325 kV 60 sec Pass
secondary winding or earth
Between secondary windings or
3 kV 60 sec Pass
secondary winding and earth
Between end shield and
5 kV 60 sec Pass
secondary winding or earth
6、Measurement of capacitance and dielectric dissipation factor:
Room temperature: 30 ℃ Humidity: 75%
U kV 10 49 98 Range

tanδ 0.0032 0.0032 0.0033 ≤0.005

Cx pF 829.84 829.89 830.09 --

tanδ between earth shield and secondary winding or earth: 0.0058 (3kV)
tanδ(standard value)≤0.020
7、Measurement Secondary DC resistance 75℃
Class Ω Class Ω Class Ω

1S1-1S2 1.132 1S1-1S3 2.299 1S1-1S4 3.075

2S1-2S2 2.500 2S1-2S3 4.052 2S1-2S4 5.092

3S1-3S2 2.501 3S1-3S3 3.927 3S1-3S4 5.101

8、Partial discharge measurement:


Pre-stressing voltage 260 kV for 60s.

Test Voltage (kV) 170kV for 30s 118kV for 30 s

Discharge quantity(pC) <8 <4

Page 2 of 5
Quality Certificate No:AJ23070146
9、Error determination: (cosφ=0.8 lag,when the burden is less than 5 VA,
cosφ=1,0 shall be used) Current value 400 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 0.00 1.1 0.06 -0.1


5 0.01 1.6 0.05 0.0
1S1-1S4
0.2S 20 20 0.01 1.4 5 0.05 0.3 6.47
100 0.01 0.7 0.04 0.7
120 0.02 0.6 0.04 0.7
2S1-2S4
5P20 100 20 -0.11 0.8

3S1-3S4
5P20 100 20 -0.10 0.6

Current value300 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.03 1.9 0.04 1.7


5 -0.02 2.9 0.05 0.5
1S1-1S3
0.2S 20 20 -0.02 2.4 5 0.05 0.8 4.96
100 0.00 0.8 0.05 0.9
120 0.01 0.6 0.05 0.9
2S1-2S3
5P20 100 20 -0.19 0.9

3S1-3S3
5P20 100 20 -0.19 0.7

Current value200 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)
1 -0.14 6.9 0.06 1.8
5 -0.12 6.7 0.05 1.8
1S1-1S2
0.2S 20 20 -0.12 4.8 5 0.05 1.8 3.44
100 -0.03 0.7 0.05 1.4
120 -0.02 0.8 0.05 1.3
2S1-2S2
5P20 100 20 -0.42 1.1

3S1-3S2
5P20 100 20 -0.46 0.9

Page 3 of 5
Quality Certificate No:AJ23070146

10、Volt-ampere characteristic and composite error measurement:


U(V) composite error
S1-S2 S1-S3 (%)
I(mA)
Class 353 398 442 374 421 467 S1-S2 S1-S3
2S 5P20 40.99 47.30 56.37 19.59 21.79 24.06 0.281 0.120
3S 5P20 41.22 47.55 56.55 19.65 21.89 24.17 0.282 0.120
U(V) composite error
S1-S4 (%)
I(mA)
Class 389 438 486 S1-S4
2S 5P20 11.90 13.15 14.38 0.072
3S 5P20 11.91 13.18 14.43 0.072

mA

mA

Page 4 of 5
Quality Certificate No:AJ23070147

Revision number:A

Current Transformer
Quality Certificate

Type: LB7—170
NO.: AJ23070147
Document number: AJ23070147

ABB Jiangsu Jingke Instrument Transformer Co. Ltd.

Address: N0.9 Gucheng Road,Su-Su Industrial Park Suqian,Jiangsu

Province,223800,P.R.China
Quality Certificate No:AJ23070147

Ⅰ. Technical Specification and Standard


Name of Testing Product: Current Transformer
Type of Testing Product: LB7-170
Serial No. of Testing Product: AJ23070147
Equipment Highest Voltage: 170 kV
Rated Current Ratio: 200-300-400/1A
Rated Burden: 20-20-20/20-20-20VA
Accuracy Class: 0.2S FS10/2*5P20
Rated frequency: 60Hz
Short-time thermal current: 40kA/1s
Rated dynamic current: 100kA
Creepage distance: 5270mm
Executive Standard: IEC 61869-2:2012
Ⅱ. Test Item
1、Verification of Terminal Markings: OK
2、Sealing test:
Residual pressure≥0.07MPa under 0.1MPa for 6h. No leakage .

3、Winding Insulation Resistance measured by 2500V Megger


Room Temperature: 30 ℃ Humidity: 75 %

Between primary and secondary winding

and primary winding and earth: ≥3000 MΩ

Between secondary windings

and secondary winding and earth: ≥2500 MΩ

Between earth screen and secondary winding

and earth: ≥2500 MΩ

Page 1 of 5
Quality Certificate No:AJ23070147
4、Inter-turn overvoltage test:
Secondary open circuit voltage
Class Primary Current (A) Time (sec)
peak (V)
1S1---1S4 400 2860 60 sec

2S1---2S4 375 4500 60 sec

3S1---3S3 371 4500 60 sec

5、Power Frequency Voltage withstand Test


Testing items Testing voltage Testing time Result
Between primary winding and
325 kV 60 sec Pass
secondary winding or earth
Between secondary windings or
3 kV 60 sec Pass
secondary winding and earth
Between end shield and
5 kV 60 sec Pass
secondary winding or earth
6、Measurement of capacitance and dielectric dissipation factor:
Room temperature: 30 ℃ Humidity: 75%
U kV 10 49 98 Range

tanδ 0.0029 0.0028 0.0029 ≤0.005

Cx pF 825.39 825.42 825.58 --

tanδ between earth shield and secondary winding or earth: 0.0072 (3kV)
tanδ(standard value)≤0.020
7、Measurement Secondary DC resistance 75℃
Class Ω Class Ω Class Ω

1S1-1S2 1.133 1S1-1S3 2.284 1S1-1S4 3.073

2S1-2S2 2.509 2S1-2S3 4.188 2S1-2S4 5.105

3S1-3S2 2.528 3S1-3S3 4.085 3S1-3S4 5.145

8、Partial discharge measurement:


Pre-stressing voltage 260 kV for 60s.

Test Voltage (kV) 170kV for 30s 118kV for 30 s

Discharge quantity(pC) <8 <4

Page 2 of 5
Quality Certificate No:AJ23070147
9、Error determination: (cosφ=0.8 lag,when the burden is less than 5 VA,
cosφ=1,0 shall be used) Current value 400 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.01 1.4 0.05 -0.5


5 0.00 1.7 0.04 0.1
1S1-1S4
0.2S 20 20 0.00 1.4 5 0.05 0.3 6.40
100 0.01 0.8 0.04 0.7
120 0.01 0.7 0.04 0.7
2S1-2S4
5P20 100 20 -0.09 0.6

3S1-3S4
5P20 100 20 -0.11 0.7

Current value300 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.02 2.3 0.05 -0.4


5 -0.03 3.1 0.05 0.7
1S1-1S3
0.2S 20 20 -0.03 2.4 5 0.05 0.8 4.91
100 0.00 0.8 0.05 1.0
120 0.00 0.6 0.05 0.9
2S1-2S3
5P20 100 20 -0.19 0.7

3S1-3S3
5P20 100 20 -0.19 0.7

Current value200 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)
1 -0.15 6.4 0.05 1.8
5 -0.13 6.9 0.04 1.7
1S1-1S2
0.2S 20 20 -0.12 4.2 5 0.05 1.9 3.40
100 -0.03 0.3 0.05 1.3
120 -0.02 0.1 0.05 1.2
2S1-2S2
5P20 100 20 -0.46 0.9

3S1-3S2
5P20 100 20 -0.45 0.8

Page 3 of 5
Quality Certificate No:AJ23070147

10、Volt-ampere characteristic and composite error measurement:


U(V) composite error
S1-S2 S1-S3 (%)
I(mA)
Class 353 398 442 374 421 467 S1-S2 S1-S3
2S 5P20 41.42 47.63 56.45 19.82 22.05 24.33 0.281 0.122
3S 5P20 40.29 45.71 52.26 19.43 21.59 23.78 0.261 0.119
U(V) composite error
S1-S4 (%)
I(mA)
Class 389 438 486 S1-S4
2S 5P20 12.04 13.31 14.56 0.073
3S 5P20 11.81 13.05 14.27 0.071

mA

mA

Page 4 of 5
Quality Certificate No:AJ23070148

Revision number:A

Current Transformer
Quality Certificate

Type: LB7—170
NO.: AJ23070148
Document number: AJ23070148

ABB Jiangsu Jingke Instrument Transformer Co. Ltd.

Address: N0.9 Gucheng Road,Su-Su Industrial Park Suqian,Jiangsu

Province,223800,P.R.China
Quality Certificate No:AJ23070148

Ⅰ. Technical Specification and Standard


Name of Testing Product: Current Transformer
Type of Testing Product: LB7-170
Serial No. of Testing Product: AJ23070148
Equipment Highest Voltage: 170 kV
Rated Current Ratio: 200-300-400/1A
Rated Burden: 20-20-20/20-20-20VA
Accuracy Class: 0.2S FS10/2*5P20
Rated frequency: 60Hz
Short-time thermal current: 40kA/1s
Rated dynamic current: 100kA
Creepage distance: 5270mm
Executive Standard: IEC 61869-2:2012
Ⅱ. Test Item
1、Verification of Terminal Markings: OK
2、Sealing test:
Residual pressure≥0.07MPa under 0.1MPa for 6h. No leakage .

3、Winding Insulation Resistance measured by 2500V Megger


Room Temperature: 30 ℃ Humidity: 75 %

Between primary and secondary winding

and primary winding and earth: ≥3000 MΩ

Between secondary windings

and secondary winding and earth: ≥2500 MΩ

Between earth screen and secondary winding

and earth: ≥2500 MΩ

Page 1 of 5
Quality Certificate No:AJ23070148
4、Inter-turn overvoltage test:
Secondary open circuit voltage
Class Primary Current (A) Time (sec)
peak (V)
1S1---1S4 400 2760 60 sec

2S1---2S4 381 4500 60 sec

3S1---3S3 382 4500 60 sec

5、Power Frequency Voltage withstand Test


Testing items Testing voltage Testing time Result
Between primary winding and
325 kV 60 sec Pass
secondary winding or earth
Between secondary windings or
3 kV 60 sec Pass
secondary winding and earth
Between end shield and
5 kV 60 sec Pass
secondary winding or earth
6、Measurement of capacitance and dielectric dissipation factor:
Room temperature: 30 ℃ Humidity: 75%
U kV 10 49 98 Range

tanδ 0.0028 0.0028 0.0029 ≤0.005

Cx pF 819.48 819.49 819.64 --

tanδ between earth shield and secondary winding or earth: 0.0050 (3kV)
tanδ(standard value)≤0.020
7、Measurement Secondary DC resistance 75℃
Class Ω Class Ω Class Ω

1S1-1S2 1.154 1S1-1S3 2.365 1S1-1S4 3.120

2S1-2S2 2.512 2S1-2S3 4.017 2S1-2S4 5.110

3S1-3S2 2.506 3S1-3S3 4.007 3S1-3S4 5.106

8、Partial discharge measurement:


Pre-stressing voltage 260 kV for 60s.

Test Voltage (kV) 170kV for 30s 118kV for 30 s

Discharge quantity(pC) <8 <4

Page 2 of 5
Quality Certificate No:AJ23070148
9、Error determination: (cosφ=0.8 lag,when the burden is less than 5 VA,
cosφ=1,0 shall be used) Current value 400 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 0.02 1.0 0.06 -0.3


5 0.01 1.3 0.05 -0.1
1S1-1S4
0.2S 20 20 0.01 1.3 5 0.05 0.3 6.48
100 0.02 0.7 0.04 0.7
120 0.02 0.6 0.04 0.7
2S1-2S4
5P20 100 20 -0.11 0.9

3S1-3S4
5P20 100 20 -0.10 0.8

Current value300 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.02 2.0 0.06 -0.3


5 -0.03 2.6 0.05 0.4
1S1-1S3
0.2S 20 20 -0.02 2.2 5 0.05 0.7 4.96
100 0.01 0.7 0.05 0.9
120 0.01 0.5 0.05 0.9
2S1-2S3
5P20 100 20 -0.19 0.9

3S1-3S3
5P20 100 20 -0.18 1.0

Current value200 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)
1 -0.11 7.5 0.05 1.1
5 -0.11 6.9 0.04 1.7
1S1-1S2
0.2S 20 20 -0.11 4.0 5 0.05 1.8 3.45
100 -0.02 0.4 0.05 1.3
120 -0.01 0.4 0.05 1.2
2S1-2S2
5P20 100 20 -0.44 1.4

3S1-3S2
5P20 100 20 -0.41 1.4

Page 3 of 5
Quality Certificate No:AJ23070148

10、Volt-ampere characteristic and composite error measurement:


U(V) composite error
S1-S2 S1-S3 (%)
I(mA)
Class 353 398 442 374 421 467 S1-S2 S1-S3
2S 5P20 41.97 48.57 58.46 20.03 22.28 24.61 0.291 0.123
3S 5P20 41.23 47.47 57.49 19.66 21.88 24.15 0.286 0.121
U(V) composite error
S1-S4 (%)
I(mA)
Class 389 438 486 S1-S4
2S 5P20 12.19 13.46 14.71 0.073
3S 5P20 11.95 13.20 14.44 0.072

mA

mA

Page 4 of 5
Quality Certificate No:AJ23070149

Revision number:A

Current Transformer
Quality Certificate

Type: LB7—170
NO.: AJ23070149
Document number: AJ23070149

ABB Jiangsu Jingke Instrument Transformer Co. Ltd.

Address: N0.9 Gucheng Road,Su-Su Industrial Park Suqian,Jiangsu

Province,223800,P.R.China
Quality Certificate No:AJ23070149

Ⅰ. Technical Specification and Standard


Name of Testing Product: Current Transformer
Type of Testing Product: LB7-170
Serial No. of Testing Product: AJ23070149
Equipment Highest Voltage: 170 kV
Rated Current Ratio: 200-300-400/1A
Rated Burden: 20-20-20/20-20-20VA
Accuracy Class: 0.2S FS10/2*5P20
Rated frequency: 60Hz
Short-time thermal current: 40kA/1s
Rated dynamic current: 100kA
Creepage distance: 5270mm
Executive Standard: IEC 61869-2:2012
Ⅱ. Test Item
1、Verification of Terminal Markings: OK
2、Sealing test:
Residual pressure≥0.07MPa under 0.1MPa for 6h. No leakage .

3、Winding Insulation Resistance measured by 2500V Megger


Room Temperature: 30 ℃ Humidity: 75 %

Between primary and secondary winding

and primary winding and earth: ≥3000 MΩ

Between secondary windings

and secondary winding and earth: ≥2500 MΩ

Between earth screen and secondary winding

and earth: ≥2500 MΩ

Page 1 of 5
Quality Certificate No:AJ23070149
4、Inter-turn overvoltage test:
Secondary open circuit voltage
Class Primary Current (A) Time (sec)
peak (V)
1S1---1S4 400 2750 60 sec

2S1---2S4 380 4500 60 sec

3S1---3S3 380 4500 60 sec

5、Power Frequency Voltage withstand Test


Testing items Testing voltage Testing time Result
Between primary winding and
325 kV 60 sec Pass
secondary winding or earth
Between secondary windings or
3 kV 60 sec Pass
secondary winding and earth
Between end shield and
5 kV 60 sec Pass
secondary winding or earth
6、Measurement of capacitance and dielectric dissipation factor:
Room temperature: 30 ℃ Humidity: 75%
U kV 10 49 98 Range

tanδ 0.0031 0.0030 0.0030 ≤0.005

Cx pF 826.20 826.58 826.44 --

tanδ between earth shield and secondary winding or earth: 0.0058 (3kV)
tanδ(standard value)≤0.020
7、Measurement Secondary DC resistance 75℃
Class Ω Class Ω Class Ω

1S1-1S2 1.154 1S1-1S3 2.349 1S1-1S4 3.145

2S1-2S2 2.507 2S1-2S3 3.959 2S1-2S4 5.108

3S1-3S2 2.516 3S1-3S3 3.928 3S1-3S4 5.125

8、Partial discharge measurement:


Pre-stressing voltage 260 kV for 60s.

Test Voltage (kV) 170kV for 30s 118kV for 30 s

Discharge quantity(pC) <8 <4

Page 2 of 5
Quality Certificate No:AJ23070149
9、Error determination: (cosφ=0.8 lag,when the burden is less than 5 VA,
cosφ=1,0 shall be used) Current value 400 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.02 1.3 0.03 -0.3


5 0.00 1.5 0.04 0.3
1S1-1S4
0.2S 20 20 0.01 1.5 5 0.05 0.5 6.28
100 0.01 1.1 0.04 0.8
120 0.01 0.9 0.04 0.8
2S1-2S4
5P20 100 20 -0.09 0.5

3S1-3S4
5P20 100 20 -0.11 0.8

Current value300 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)

1 -0.05 2.6 0.05 0.9


5 -0.03 2.9 0.04 0.4
1S1-1S3
0.2S 20 20 -0.02 2.6 5 0.05 0.8 4.82
100 -0.01 1.4 0.05 1.1
120 0.00 1.1 0.05 1.1
2S1-2S3
5P20 100 20 -0.19 0.9

3S1-3S3
5P20 100 20 -0.19 0.9

Current value200 A
Rated Current Phase Current Phase
Accuracy Secondary Secondary
current error displacement error displacement FS10
class burden VA burden VA
(%) (%) (´) (%) (´)
1 -0.16 7.5 0.02 1.7
5 -0.13 6.9 0.04 1.7
1S1-1S2
0.2S 20 20 -0.12 5.2 5 0.05 1.8 3.34
100 -0.03 0.6 0.05 1.5
120 -0.02 0.4 0.05 1.5
2S1-2S2
5P20 100 20 -0.43 1.0

3S1-3S2
5P20 100 20 -0.43 1.1

Page 3 of 5
Quality Certificate No:AJ23070149

10、Volt-ampere characteristic and composite error measurement:


U(V) composite error
S1-S2 S1-S3 (%)
I(mA)
Class 353 398 442 374 421 467 S1-S2 S1-S3
2S 5P20 40.75 47.10 56.33 19.48 21.67 23.90 0.281 0.119
3S 5P20 42.36 48.56 56.87 20.25 22.56 24.88 0.284 0.124
U(V) composite error
S1-S4 (%)
I(mA)
Class 389 438 486 S1-S4
2S 5P20 11.86 13.09 14.31 0.071
3S 5P20 12.26 13.57 14.87 0.074

mA

mA

Page 4 of 5

You might also like