Professional Documents
Culture Documents
ATTENUATOR
The AT-603AP is a flush-mounted wall attenuator and uses a transformer which allows connection of a wide range
of loads (60 W or less). Volume can be adjusted in five steps. The AT-603AP features push-in terminal block for
easy connection.
Specifications
Dimensions (W x H x D) 70 x 120 x 52,4 mm
Dimensions (ø x D) x 52,4 mm
Finish ABS resin, white
Operating temperature -10 °C to +50 °C
We supply sound, not equipment. ©TOA Electronics Europe GmbH | Data subject to change without notice.
www.toa.eu. EN, 2020/07/21
AT-603AP
ATTENUATOR
Appearance
41 [1.61"]
27.6 18.4 34
[1.09"] [0.72"] [1.34"]
70 [2.76"]
MADE IN INDONESIA
9mm TOA Corporation
STRIPPED LENGTH
N
R
SP
COM R N
<3-WIRE SYSTEM>
N
R
83.5 [3.29"]
68.3 [2.69"]
108 [4.25"]
101 [3.98"]
120 [4.72"]
SP
COM HOT
<2-WIRE SYSTEM>
RATED INPUT 60W
OFF
OFF
model AT-603AP
ATTENUATOR
N R SP
Plate (accessory)
Front View Side View Rear View Figure with the supplied plate attached
(SCALE:1/3)
ATTENUATOR ATTENUATOR
N R SP N R SP
SPEAKER (option) SPEAKER (option)
+ +
- -
HOT HOT N N (Normal)
R R (Emergency)
COM COM COM COM (Common)
UNIT:mm SCALE:1/2
We supply sound, not equipment. ©TOA Electronics Europe GmbH | Data subject to change without notice.
www.toa.eu. EN, 2020/07/21