Professional Documents
Culture Documents
APPLICATION STANDARDS
A halogen free fire resistant, individually screened, NEK 606, IEC 60092-353, EN 60228,
instrumentation and telecommunication cable for fixed
installation. Suitable for use in all marine environments such as Flame Retardant according to IEC/EN 60331, IEC/EN
muddy, dry, wet or oily conditions, meeting the requirement for 60332-3-22, IEC/EN 60332-1-2
NEK 606. Halogen free according to IEC/EN 61034-2, IEC/EN 60754-1/2
CHARACTERISTICS
Voltage Rating Uo/U
150/250V
ISO/IEC
Minimum Bending Radius 17025
10 x overall diameter Accredited
Testing
Laboratory
8578
CONSTRUCTION
REGULATORY COMPLIANCE
Conductor
This cable meets the requirements of the Low Voltage Directive 2014/35/EU
Class 2 stranded tinned copper conductor
and the RoHS Directive 2011/65/EU. RoHS compliance has been tested and
confirmed by The Cable Lab® as meeting the requirements of the BSI RoHS
Tape Trusted KitemarkTM.
Mica glass tape
RoHS Trusted
Insulation KITEMARK™
Drain Wire
Stranded tinned copper
Individual Screen
Copper polyester tape
Bedding
Halogen free compound
Screen
TCWB (Tinned Copper Wire Braid)
Sheath
SHF, MUD (halogen free, mud resistant)
Core Identification
Pairs: Black Blue
Triples: Black Blue Brown
Sheath Colour
Blue Grey
DIMENSIONS
ELAND PART NO. NO. OF PAIRS/ NOMINAL CROSS SECTIONAL AREA NOMINAL OVERALL DIAMETER NOMINAL WEIGHT
TRIPLES mm2 mm kg/km
ELAND PART NO. NO. OF PAIRS/TRIPLES NOMINAL CROSS SECTIONAL AREA NOMINAL OVERALL DIAMETER NOMINAL WEIGHT
mm2 mm kg/km
*Eland Part No. shown above designate the gland colour (*). For each colour substitute * for a colour code as listed below. e.g. ASHNBI0175GR = 0.75mm2 Grey
COLOUR CODES
CODE GR BL
CONDUCTORS
NOMINAL CROSS MAXIMUM RESISTANCE OF CONDUCTOR AT 20°C
SECTIONAL AREA ohms/km
mm2
Class 2 Class 5
ELECTRICAL CHARACTERISTICS
NOMINAL CROSS SECTIONAL AREA SINGLE CORE 2 CORE 3 AND 4 CORE 5 CORE
mm2 Amps Amps Amps Amps
1 18 15 13 11
1.5 23 20 16 13
2.5 30 26 21 18
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is
believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.