Professional Documents
Culture Documents
Accounting Information Systems Hall 9th Edition Test Bank
Accounting Information Systems Hall 9th Edition Test Bank
TRUE/FALSE
ANS: T PTS: 1
2. Reports generated by the cost accounting system include performance reports and budget
reports.
ANS: T PTS: 1
3. The cost accounting system authorizes the release of raw materials into production.
ANS: F PTS: 1
ANS: F PTS: 1
5. The bill of materials specifies the types and quantities of the raw materials and subassemblies
used in producing a single unit of finished product.
ANS: T PTS: 1
ANS: F PTS: 1
ANS: F PTS: 1
8. The objective of the Economic Order Quantity model is to reduce total inventory costs by
minimizing carrying costs and ordering costs.
ANS: T PTS: 1
9. The work-in-process file is the subsidiary ledger for the work-in-process control account.
ANS: T PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
10. Move tickets authorize the storekeeper to release materials to work centers.
ANS: F PTS: 1
11. Typically the only allocated cost in the value stream is a charge per square foot for the value
stream production facility.
ANS: T PTS: 1
12. Computer Integrated Manufacturing focuses on reducing the complexity of the physical
manufacturing layout of the shop floor.
ANS: F PTS: 1
13. The only objective of the Just-In-Time philosophy is to reduce inventory levels.
ANS: F PTS: 1
ANS: F PTS: 1
15. ABC assigns cost to cost objects based on their use of activities.
ANS: T PTS: 1
16. The complexities of ABC have caused many firms to abandon this method in favor of a
simpler accounting model called value stream accounting.
ANS: T PTS: 1
17. A company’s value stream includes all steps in a process, both essential and non-essential, for
which the customer is willing to pay.
ANS: F PTS: 1
18. Lean manufacturing evolved from the Toyota Production System (TPS), which is based on the
just-in-time (JIT) production model.
ANS: T PTS: 1
19. The two subsystems of a traditional conversion cycle are the production system and the
delivery system.
ANS: F PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
20. Manufacturing resources planning (MRP II) has evolved into enterprise resource planning
(ERP).
ANS: T PTS: 1
21. Pull processing involves pulling products from the consumer end (demand), rather than
pushing them from the production end (supply).
ANS: T PTS: 1
22. The inventory control function updates and maintains both raw materials and finished goods
inventory subsidiary ledgers.
ANS: T PTS: 1
23. An excess materials requisition is a control that signals that a greater than standard quantity of
materials is being ordered from the vendor.
ANS: F PTS: 1
24. Cost accounting initiates a WIP account upon receiving the first move ticket of a batch.
ANS: F PTS: 1
25. A company’s value stream map depicts only the value added activities needed to complete a
process or product.
ANS: T PTS: 1
MULTIPLE CHOICE
ANS: D PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: B PTS: 1
ANS: C PTS: 1
ANS: C PTS: 1
ANS: B PTS: 1
ANS: B PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: C PTS: 1
ANS: B PTS: 1
9. A move ticket
a. is the formal plan and authority to begin production
b. specifies the materials and production required for each batch
c. records the work done in each work center
d. authorizes the storekeeper to release materials to work centers
ANS: C PTS: 1
10. The internal control significance of the excess materials requisition is that it
a. indicates the amount of material released to work centers
b. identifies materials used in production that exceed the standard amount allowed
c. indicates the standard quantities required for production
d. documents the return to raw materials inventory of unused production materials
ANS: B PTS: 1
ANS: C PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: B PTS: 1
13. Which of the following is not an assumption of the Economic Order Quantity model?
a. demand for the product is known with certainty
b. total cost per year of placing orders is fixed
c. lead time is known and is constant
d. there are no quantity discounts
ANS: B PTS: 1
ANS: B PTS: 1
15. What is the economic order quantity if the annual demand is 10,000 units, set up cost of
placing each order is $3 and the holding cost per unit per year is $2?
a. 174
b. 123
c. 245
d. 116
ANS: A PTS: 1
16. If the daily demand is 40 units and the lead time is 12 days, the reorder point is
a. 40 units
b. 48 units
c. 480 units
d. none of the above
ANS: C PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: A PTS: 1
18. Which of the following is not a problem associated with standard cost accounting?
a. Standard costing motivates management to produce large batches of products and
build inventory.
b. Applying standard costing leads to product cost distortions in a lean environment.
c. Standard cost data are associated with excessive time lags that reduce its
usefulness.
d. The financial orientation of standard costing may promote bad decisions.
e. All of the above are problems with standard costing.
ANS: E PTS: 1
19. Computer integrated manufacturing includes all of the following technologies except
a. robotics
b. materials requirements planning
c. automated storage and retrieval systems
d. computer aided design
ANS: B PTS: 1
20. Which of the following would not be included as a value stream cost?
a. Labor costs of employees who simply transport the product from cell to cell.
b. Labor costs of employees who design the product.
c. A charge per square foot for the value stream production facility including cost of
rent and building maintenance.
d. All of the above are value stream costs
ANS: D PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: B PTS: 1
22. All of the following are internal control procedures that should be in place in the conversion
cycle except
a. calculation and analysis of direct material and direct labor variances
b. retention of excess materials by work centers
c. physical count of inventory items on hand
d. limited access to raw material and finished goods inventories
ANS: B PTS: 1
ANS: C PTS: 1
24. A manufacturing process that is organized into group technology cells utilizing no human
labor is called
a. islands of technology
b. process simplification
c. computer integrated manufacturing
d. traditional manufacturing
ANS: C PTS: 1
ANS: A PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: C PTS: 1
ANS: B PTS: 1
ANS: A PTS: 1
29. The cost of poor quality includes all of the following except
a. cost of rework
b. warranty claims
c. scheduling delays
d. proceeds from the sale of scrap
ANS: D PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS: C PTS: 1
31. Deficiencies of the traditional cost accounting information system include all of the following
except
a. an emphasis on financial performance
b. inaccurate cost allocations
c. an emphasis on standard costs
d. immediate feedback about deviations from the norm
ANS: D PTS: 1
ANS: B PTS: 1
ANS: B PTS: 1
ANS: D PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
35. Which of the following statements about the EOQ inventory model assumptions is incorrect?
a. Demand for the product is constant and known with certainty.
b. The lead time is a variable.
c. All inventories in the order arrive at the same time.
d. Total ordering cost is a variable
ANS: B PTS: 1
ANS: A PTS: 1
37. All of the following are documents in batch process production systems except
a. production schedule
b. route sheet
c. materials requisition
d. bill of manufacturing
ANS: D PTS: 1
ANS: C PTS: 1
ANS: A PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
40. All of the following are problems with traditional accounting information except:
a. Managers in a lean setting require immediate information.
b. The measurement principle tends to ignore standards other than money.
c. Standard costing motivates nonlean behavior in operations.
d. The overhead component in a manufacturing company is usually very large.
e. All of the above are problems associated with traditional accounting information.
ANS: E PTS: 1
SHORT ANSWER
ANS:
continuous process manufacturing
PTS: 1
ANS:
The BOM specifies the types and quantities of raw materials and subassemblies used in
producing a single unit of finished product.
PTS: 1
ANS:
A materials requisition authorizes the storekeeper to release materials and subassemblies to
the production process. A purchase requisition authorizes the purchasing department to place
an order with an external vendor to acquire goods or services.
PTS: 1
ANS:
work orders prepared by production planning and control; move tickets signed by the
foreman; materials requisitions and excess materials requisitions
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS:
A company’s conversion cycle transforms (converts) input resources, such as raw materials,
labor, and overhead, into finished products or services for sale.
PTS: 1
ANS:
A flexible production system shortens the physical distance between activities, reducing setup
time, processing time, handling costs, and inventories.
PTS: 1
ANS:
Cost allocations may be inaccurate; there is a time lag in reporting; information is reported in
financial terms; there is an emphasis on standard cost.
PTS: 1
8. In Activity Based Costing, what is the term used to refer to the work performed by a firm?
ANS:
an activity
PTS: 1
ANS:
Inventory control minimizes total inventory cost while ensuring that adequate inventories
exist to meet current demand. Various inventory models used to help answer two fundamental
questions:
1. When should inventory be purchased?
2. How much inventory should be purchased?
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS:
The goal of lean manufacturing is improved efficiency and effectiveness in every area,
including product design, supplier interaction, factory operations, employee management, and
customer relations.
PTS: 1
ANS:
Islands of technology describes an environment where modern automation exists in the form
of islands that stand alone within the traditional setting.
PTS: 1
ANS:
Cost accounting reconciles materials and labor usage, from the materials requisitions and job
tickets, with prescribed standards and identifies significant departures. Such variance analysis
is important for control of the manufacturing process.
PTS: 1
13. How are cost structures fundamentally different between the traditional and CIM
environments?
ANS:
In the traditional manufacturing environment, direct labor is a much larger component of total
manufacturing costs than in the CIM environment. Overhead, on the other hand, is a far more
significant element of cost in advanced technology manufacturing.
PTS: 1
14. What are the key segregation of duties issues in the conversion cycle?
ANS:
Production planning and control department is organizationally segregated from the work
centers. Inventory control must be separated from materials storeroom and FG warehouse.
Cost accounting must be separate from the work centers. GL must be separate from
departments keeping subsidiary accounts. GL is organizationally segregated from inventory
control and cost accounting.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
15. Traditional accounting assumes that products cause costs. ABC assumes that
_________________ cause costs.
ANS:
activities
PTS: 1
ANS:
Essential activities add value to the organization either through adding value to the customer
or to the organization. Non-essential activities do not add value.
PTS: 1
ANS:
A company’s value stream includes all the steps in the process that are essential to producing
a product. These are the steps for which the customer is willing to pay.
PTS: 1
ANS:
The receipt by cost accounting of the last move ticket for a batch from the work center signals
the completion of the production process.
PTS: 1
19. What document triggers the beginning of the cost accounting process for a given production
run?
ANS:
The work order from the production planning and control department triggers the cost
accounting process.
PTS: 1
ANS:
Sales forecast, production schedule, bill of materials, route sheet, work order, move ticket, and
materials requisition.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ESSAY
1. Itemize the disadvantages of ABC that have caused some firms to abandon this technique.
ANS:
1. ABC has been criticized for being too time consuming and complicated for practical
applications over a sustained period.
2. Critics charge that rather than promoting continuous improvement, ABC creates
complex bureaucracies within organizations that are in conflict with the lean
manufacturing philosophies of process simplification and waste elimination.
3. The task of identifying activity costs and cost drivers can be a significant and ongoing
undertaking. As products and processes change so do the associated activity costs and
drivers.
4. Unless significant resources are committed to maintaining the accuracy of activity costs
and the appropriateness of drivers, cost assignments become inaccurate.
PTS: 1
ANS:
The production schedule is the formal plan and authorization to begin production. It describes
the specific products to be made, quantities per batch and manufacturing time table.
The bill of materials (BOM) specifies the types and quantities of the RM and subassemblies
used to produce one unit of finished product.
A route sheet shows the production path that a particular batch of product follows during
manufacturing (sequence of operations and standard time of each task).
The work order draws from BOMs and route sheets to specify the materials and production
for each batch. These, together with move tickets, initiate the manufacturing process.
A move ticket records work done in each work center and authorizes the movement of the job
or batch from one work center to the next.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
3. Discuss the assumptions of the economic order quantity (EOQ) model and its objective.
ANS:
1. Demand for the product is constant and known with certainty.
2. The lead time is known and constant.
3. All inventories in the order arrive at the same time.
4. The total cost per year of placing orders is a variable that decreases as quantities
ordered increases.
5. The total cost per year of holding inventories (carrying costs) is a variable that
increases as the quantities ordered increase.
6. There are no quantity discounts.
PTS: 1
ANS:
1. World-class companies must maintain strategic agility and be able to turn on a dime.
Top management must be intimately aware of customer needs and not become rigid
and resistant paradigm change.
2. World-class companies motivate and treat employees like appreciating assets. To
activate the talents of everyone, decisions are pushed to the lowest level in the
organization. The result is a flat and responsive organizational structure.
3. A world-class company profitably meets the needs of its customers. Its goal is not
simply to satisfy customers, but to positively delight them. This is not something that
can be done once and then forgotten. With competitors aggressively seeking new ways
to increase market share, a world class firm must continue to delight its customers.
4. The philosophy of customer satisfaction permeates the world-class firm. All of its
activities, from the acquisition of raw materials to selling the finished product, form a
“chain of customers.” Each activity is dedicated to serving its customer, which is the
next activity in the process. The final paying customer is the last in the chain.
5. Finally, manufacturing firms that achieve world-class status, do so by following a
philosophy of lean manufacturing. This involves doing more with less, eliminating
waste, and reducing production cycle time.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS:
Automation is at the heart of the lean manufacturing philosophy. By replacing labor with
automation, a firm can reduce waste, improve efficiency, increase quality, and improve
flexibility.
PTS: 1
ANS:
MRP is an automated production planning and control system used to support inventory
management. It is a calculation method geared towards determining how much of which raw
materials are required and when they should be ordered. MRP II is an extension of MRP that
has evolved beyond inventory management. It is both a system and a philosophy for
coordinating a wide range of manufacturing activities. MRP II integrates product
manufacturing, product engineering, sales order processing, customer billing, human
resources, and related accounting functions.
PTS: 1
ANS:
The various work centers send cost accounting completed move tickets. The move ticket,
along with job tickets and standards provided by the standard cost file, enable cost accounting
to update the affected WIP accounts with the standard charges for manufacturing overhead
(MOH). The receipt of the last move ticket for a particular batch signals the completion of the
production process and the transfer of products from WIP to the finished goods inventory. At
that point cost accounting closes the WIP account.
PTS: 1
8. Discuss the purpose and key features of a value stream map (VSM).
ANS:
The value stream map (VSM) graphically represents a business process to identify aspects of
it that are wasteful and should be removed.
A VSM identifies all of the actions required to complete processing on a product, along with
key information about each action item. Specific information may include total hours worked,
overtime hours, cycle time to complete a task, and error rates.
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
The VSM shows the total time required for each processing step, the time required between
steps, and identifies the types of time spent between steps such as the outbound batching time,
transit time, and inbound queue time.
PTS: 1
ANS:
Pull Processing. Products are pulled from the consumer end (demand), not pushed from the
production end (supply).
Perfect Quality. Success of the pull processing model requires zero defects in raw material,
work in process, and finished goods inventory.
Waste Minimization. All activities that do not add value and maximize the use of scarce
resources must be eliminated. Waste involves financial, human, inventory, and fixed assets.
Inventory Reduction. The hallmark of lean manufacturing firms is their success in inventory
reduction. Such firms often experience annual inventory turnovers of 100 times per year.
Production Flexibility. Long machine setup procedures cause delays in production and
encourage overproduction. Lean companies strive to reduce setup time to a minimum, which
allows them to produce a greater diversity of products quickly, without sacrificing efficiency
at lower volumes of production.
Established Supplier Relations. A lean manufacturing firm must have established and
cooperative relationships with vendors. Late deliveries, defective raw materials, or incorrect
orders will shut down production immediately since this production model allows no
inventory reserves to draw upon.
Team Attitude. Lean manufacturing relies heavily on the team attitude of all employees
involved in the process. Each employee must be vigilant of problems that threaten the
continuous flow operation of the production line.
PTS: 1
ANS:
1. Inventories cost money. They are an investment in materials, labor, and overhead that
cannot be realized until sold. Inventories also contain hidden costs. They must be transported
throughout the factory. They must be handled, stored, and counted. In addition, inventories
lose value through obsolescence.
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
PTS: 1
11. Automation is at the heart of the lean manufacturing philosophy. Discuss its stages and its
distinguishing features.
ANS:
Automation of the manufacturing process can be viewed as a gradual progression. The stages
are:
Traditional manufacturing which consists of many different types of machines that require a
lot of setup time, each controlled by a single operator. The WIP follows a circuitous route
through the different operations.
PTS: 1
12. How can a firm control against excessive quantities of raw materials being used in the
manufacturing process.
ANS:
The use of standard quantities provides a type of access control. If the materials requisition
document specifies standard quantities, excess materials require separate requisitions that may
be identified explicitly as excess materials requisitions.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems, 9e—Test Bank, Chapter 7
ANS:
Manufacturing resources planning (MRP II) is an extension of a simpler concept still in use
called materials requirements planning (MRP). MRP is an automated version of a traditional
production planning and control process. On the other hand, MRP II is a reengineering
technique that integrates several business processes. MRP II is not confined to the
management of inventory. It is both a system and a philosophy for coordinating the activities
of the entire firm. As such, MRP II has evolved into the large suites of software called
enterprise resource planning (ERP) systems. These huge commercial packages support the
information needs of the entire organization, not just the manufacturing functions. Similarities
in functionality between ERP and MRP II systems are quite apparent. Some argue that very
little real functional difference exists between the two concepts. Indeed, the similarities are
most noticeable when comparing top-end MRP II systems with low-end ERP packages.
PTS: 1
14. Explain how CAD can contribute to a firm’s move toward world-class status.
ANS:
Engineers use computer-aided design (CAD) to design better products faster. CAD systems
increase productivity, improve accuracy and allow firms to be more responsive to market
demands. Product design has been revolutionized through CAD technology. Advanced CAD
systems can design both product and process simultaneously.
Thus, aided by CAD, management can evaluate the technical feasibility of the product and
determine its “manufacturability.” CAD technology greatly shortens the time frame between
initial and final design. This allows firms to adjust their production quickly to changes in
market demand. It also allows them to respond to customer requests for unique products. The
CAD system’s external communication link permits the world-class manufacturer to share its
product design specifications with its vendors and customers. This communications link also
allows the world-class manufacturer to receive product design specifications electronically
from its customers and suppliers for its review.
PTS: 1
15. Explain how CAM can contribute to a firm’s move toward world-class status.
ANS:
Computer-aided manufacturing (CAM) is the use of computers to assist the manufacturing
process. CAM focuses on the shop floor and the control of the physical manufacturing
process. The output of the CAD system is fed to the CAM system. Thus, the CAD design is
converted by CAM into a sequence of processes. CAM systems monitor and control the
production process and routing of products through cells. Benefits from deploying a CAM
system include improved process productivity, improved cost and time estimates, improved
process monitoring, improved process quality, decreased setup times, and reduced labor costs.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.
Accounting Information Systems Hall 9th Edition Test Bank
16. Explain why traditional cost allocation methods do not work well in a CIM environment.
ANS:
Traditional accounting systems do not accurately trace costs to products and processes. An
assumption of standard costing is that all overhead needs to be allocated to products and that
overhead directly relates to the amount of labor required to make the product. In the
traditional environment, direct labor is a much larger component of total manufacturing costs
than in the CIM environment. With automated manufacturing, overhead is a far more
significant cost component. Applying standard costing leads to product cost distortions and
poor decisions regarding pricing, valuation and profitability.
PTS: 1
17. What is meant by the term “product family” and what is its relationship to value stream
accounting.
ANS:
Most organizations produce more than one product, which fall into natural lines or families.
Product families share common processes from the point of placing the order to shipping the
finished goods to the customer.
Value stream accounting cuts across functional and departmental lines to include costs related
to the product family such as marketing, selling expenses, product design, engineering,
materials purchasing, distribution, and more, but makes no distinction between direct costs
and indirect costs.
PTS: 1
© 2015 Cengage Learning. All rights reserved. May not be copied, scanned, or duplicated, in whole or in part, except for use as permitted in
a license distributed with a certain product or service or otherwise on a password-protected website for classroom use.