TABLE 3.1 RUNNING AND SLIDING FITS
Extracted with permission (ASME) from Table 1. ASA B 4.1-1955. The numbers given are the standard
limits in thousandths of an inch; multiply by 10°, Limits for hole and shaft are applied algebraically to
the basic size to obtain the limits of size of the parts. (The Standard goes to 200-in. size.)
NOMINAveRS]E : el
size RANGE, | CLASS RC 1 cLass RC 2 crassRC3 | CLASS RC 4 |
INCHES | ) ' \
Over To | Hole | Shaft Hole | Shaft Hole | Shaft | Hole _| Stoft |
0.04- 0.12, | —0.1 40.25 | 0.1 +0.25 | —0.3 +04 | —03 |
\ 0.25 0 —0.3 0 —0.55 oO | 0.7
2- 0.24 | +0.2 -0.15 +03 0.15 +0.3 04 1 +05 | -04
0 ~0.3 o 20 —0.35 o -07 | Oo ;-09]
024-040 | +0.25[ ~0.2 +04 | 0.2 os [-05 | +06 | -0.5 |
| o | -0.35 o |-o4s | 0. |-09 fo 0 ni |
040-071 | +03 | 0.25 | +04 | ~0.25 +04 | -06 +0.7 | -06
0 —0.45 0 =0.55 +0 -10 |.:-0 4 =13 |
o7i- 1.19 | +04 | -0.3 +0.5 | -0.3 +05 | —0.8 +08 | -08
0 | -0.55 G3) | 8 ik o |-164
119-197 | +04 | -04 +0.6 | -0.4 +0.6 | —1.0 $10 | —10
0 | -07 o | -08 o {-16 | .
197- 3.15 | +05 | -04 +0.7 | —0.4 +07 | 12
[0 |ieo7 0 | -09 o {-19
3.15- 4.73 | +06 | -0.5 +09 | -0.5 +09 |—14
o | -09 0 |i 0 | -23
4.73- 7.09 | +0.7 | —0.6 +1.0 | -0.6 +10 | -16
Ee o | -13 o | -26
7.09- 9.85 | +0.8 | 0.6 —0.6 +12 | -2.0
o | -12 32
985-1241 | +09 | -08
3.12)]. See also Table 3.4 and Fig. 3.9. Many mass-produced items, bolts,
Eat cold-rolled forms, structural steel shapes, tubing, keys, pulleys,
ushings, gears, etc. fall within certain specified tolerances.erate ereremypeemcnner tenner ae
$
chase RCS chase ROG | CLAS BCT cons ROM | Cras ROD Ft
{
Hole 5
#RO | 1.0
8 15.0
F100) ~12.6TABLE 32 FORCE AND SHRINK FITS (INTERFERENCE FITS)
gxtracod with permission (ASME) from Table 5, ASA B 4.1-1953. The numbers given are the standard
thoasandtie of an inch. Limits for bole and shaft are mppited algebraically to the basic si
dai Me Uae of size for the pacta. oe —s ee
t+ [tt] eel ee!
+] te] +4] +e] el ee
T+
es] 9s
ee
+
peyes
wo
0.71- 0.95 . +08 +19
—0 +18
ey
0.95 1.19 .. $i | +08
+14 | =O
11S 1.58
Lt
On| oy
e
++] +t] ++
Bel eel py
So] oc] ue
on
197- 2.56
t+
os
ie
+) 44
i+
o-
e
+
Pe] me) an] y
oa] oa| oe] on
4.73- 5.52
ttlet leet te] tel tel tei te pee ee p te let ae lee ee ea] tdTARLE 3.3 FRACTION OF
AREA UNDER NORMAL CURVE
From -- 00 to z measured from zero at 2TABLE 3.4 STANDARD
TOLERANCES (from ASA BB 4,1-1955)
(This is only pert of the tabulation in the Standard.) Tolerances are in thousandths of an
inch; for ure with standard gages. Includes valnes agraed to by ABC (American, British,
Cusadian). Not part of the standard bat given at a guide: Grades 4, 5-—lapping and honing ;
Grades 5, 6, 7—cylindrical grinding, surfuce grinding, diamand turning and boring, branch.
ing; Guages 610 inel.—-rcaming; Goades 7-13--turning; Grndes 6-13-—-boring; Grades
3@-13—maiiting, planing, shaping, dritling. See ateo Fig. 3.9.
er 8 TEN PLO OP
t . si ae
Paee O12 | ois] a2] gas | os 16125) 4] 6
| ai 024 | 025} 020] 03 | 95 i | soy sf} 7
| 02 O40 | O45) 0.25) 04 106 j22tasi 6] 9
ae an [02 [03 | 04 | 07 ize] 40] 7 5 wo
an-1i9 | o2sjo4 fos fa. 35/30) 8 112
f hi 2s7 | 63 | e4 | Os 40) 6 10 | 16
197-548 | a3 las asi 7 | a2 | a3
his 473 | G8 | 6: so| 9
47 7.09 | OS é
7.09- 9.85 | 86 7
BS-1241 | 06 8
1241-15.78 | 0.7 9
15.75-19.69 28 hio