Professional Documents
Culture Documents
M O U N T
Aluminium system
Ventilated stone dry fixing
With continous kerfs
STONE
ANCHOR FASTNER
LINEAR MOUNT
L I N E A R
M O U N T
Aluminium linear system
Ventilated stone dry fixing
With continous kerfs
Linear mount is specifically designed for dry cladding wherein the cavity has to be
minimal. The restricted allowance of the system is most suitable for an area which is fairly in line
and level. The system offers horizontal connections in stones with continuous kerf while
reducing the shear load in the anchors and transferring it onto the pull-out load. An apt system
for dry cladding stones in the interiors. This system is 100% recyclable. This system is
generally recommended for interiors because of its efficiency and optimisation of tight spaces.
We designed a specific system for dry cladding in the interiors this is because now more and
more buildings have large atriums which is open to sky, in these atriums when stone is to be put
dry cladding is the most secure way of fixing.
Plan & Section
STONE
LINEAR MOUNT
ANCHOR FASTNER
ANCHOR FASTNER
STONE
LINEAR MOUNT
LINER MOUNT
ANCHOR FASTNER
2. A sub-frame of the aluminium, anchored to the supporting wall and is composed of:
-Anchor fasteners of specified make are drilled mechanically in the vertical walls.
Depending upon the type of back support, RCC / Brick fasteners can be used. For unusual
loading conditions chemical fasteners can be used.
-EPDM gasket- To eliminate vibrations and act as a separator between aluminium and
stone.
Key features of this system
- Minimum cavity used so that there is maximum efficiency for interiors.
- load conversation: The profile in engineered to convert the shear load on the anchors into
pull out load.
- The cavity acts as an insulator which helps is protecting the RCC structure.
- No discoloration of the stone. Since its dry cladding there are no chemicals involved in the
installation process.
- Environmentally friendly: This system is completely recyclable. Every material in this system
can be re used. System is 100 % recyclable.
OFFICE:
MARMO SOLUTIONS PVT. LTD.
SHOP NO. 47A, GROUND AND FIRST FLOOR, PARMAR COMPOUND NEAR LAXMI
NARAYAN TEMPLE, HIGHWAY ROAD, VILE PARLE, EAST MUMBAI -400099
ashish@marmosolutions.com
www.marmosolutions.com
+91 114058 6081 / +91 9555155080
OFFICE:
1205, THE CHAMBERS, ADJOINING W.E.H. METRO STATION, ANDHERI
EAST, MUMBAI- 400069.
FACTORY:
T4/T5, QURESHI COMPOUND, CHINCHOTI NAKA, MUMBAI-AHMEDABAD
HIGHWAY, NAIGOAN EAST, VASAI 401208.
www.aumartemec.com/systems
info@aumartemec.com
+91 9833533000