Professional Documents
Culture Documents
Configuration SW 2.08.x
elisa 300 – elisa 800 VIT
The elisa family
29.09.2020 2
Content
1. General
1.1. Transferring the configuration to other devices
2. Selecting the language
3. Selecting the ventilation modes
4. Activating options
4.1. Configuring external interfaces (elisa 600 / elisa 800)
4.2. Options
4.3. Availability
5. Selecting the “Manoeuvres”, “Weaning” and “Functions” features
5.1. Selecting features
5.2. Manoeuvres, weaning and functions: setting up shortcuts
6. Selecting the screen colour
7. Selecting the Overlay Opacity
29.09.2020 3
Content
29.09.2020 4
1.) General
29.09.2020 5
1.1.) Transferring the configuration to other devices
29.09.2020 6
2.) Selecting the language
This is also the menu to select the desired units for pressure
and etCO2 as well as the time zone.
29.09.2020 7
3.) Selecting ventilation modes
29.09.2020 8
3.1) Available ventilation modes
29.09.2020 9
4.) Activating options
4.1) Configuration of external interfaces
29.09.2020 13
5.1.) Tab positions for manoeuvres, weaning and functions
Drag the selected tabs individually from the bar on the left to the
desired position in the tab bar.
Drag the icons from the list to the desired position. You can assign up
to 11 shortcuts; the twelfth place is reserved for the Help function.
29.09.2020 15
6.) Selecting the screen colour
29.09.2020 16
7.) Selecting the Overlay Opacity
For the overlay opacity choose a setting between 10% and 90%.
29.09.2020 17
8.) Configure screen views
29.09.2020 18
9.) Configure screen views
29.09.2020 19
8.1.) Configure screen views: Home
Add views by tapping „+“, then choose a view from the list.
Delete views by activating the view (longpress), then selecting the
last possible choice:
29.09.2020 20
8.1.) Configure screen views: Home
29.09.2020 21
View 01
29.09.2020 22
View 02
29.09.2020 23
View 03
29.09.2020 24
View 04
29.09.2020 25
View 05
29.09.2020 26
View 06
29.09.2020 27
View 07
29.09.2020 28
View 08
29.09.2020 29
View 09
29.09.2020 30
View 10
29.09.2020 31
View 11
29.09.2020 32
View 12
29.09.2020 33
View 13
29.09.2020 34
View 14
29.09.2020 35
View 15
29.09.2020 36
View 16
29.09.2020 37
View 17
29.09.2020 38
View 18
29.09.2020 39
View 19
29.09.2020 40
View 20
29.09.2020 41
8.2.) Configure screen views: Standby
29.09.2020 42
8.2.) Standby: View 1
29.09.2020 43
8.2.) Standby: View 2
29.09.2020 44
8.3.) Configuration in detail
29.09.2020 45
8.3.) Configuration in detail
29.09.2020 46
8.4.) Access rights
can be
adjusted
locked
29.09.2020 47
9.) Further configuration options
9.1.) Data Transfer
29.09.2020 48
9.2.) Changing the PIN
You can change the PIN Code for either configuration- or service
menu here.
Note: The modified PIN code will not be included when you transfer
the configuration to another elisa 600 / elisa 800 device with a USB
stick.
29.09.2020 49
9.2.) Changing the PIN
„Lost“ PIN:
Your service technician carries a USB stick with a generic key.
Insert the USB stick. Tap the additional button that appears on the
stand-by screen to generate new PINs for the configuration and
service level. Note down the new PINs!
These can again be changed in the respective level.
29.09.2020 50
Further configuration options
Hyg. Cycle
Parameters
29.09.2020 51
Any questions?