The document contains a table listing 62 pipes (labeled T-1 through T-62) with their material type, Hazen-Williams coefficient, diameter, flow rate, velocity, and head loss. For most pipes, the flow rate, velocity, and head loss values are listed as (N/A). Pipe T-18 is HDPE with a diameter of 600mm, flow rate of 32.617 L/s, velocity of 0.12 m/s and head loss of 0.00m. Pipe T-38 is also HDPE but with a diameter of 600mm, larger flow rate of 278.547 L/s, velocity of 0.99 m/s and head loss of 3.39m
The document contains a table listing 62 pipes (labeled T-1 through T-62) with their material type, Hazen-Williams coefficient, diameter, flow rate, velocity, and head loss. For most pipes, the flow rate, velocity, and head loss values are listed as (N/A). Pipe T-18 is HDPE with a diameter of 600mm, flow rate of 32.617 L/s, velocity of 0.12 m/s and head loss of 0.00m. Pipe T-38 is also HDPE but with a diameter of 600mm, larger flow rate of 278.547 L/s, velocity of 0.99 m/s and head loss of 3.39m
The document contains a table listing 62 pipes (labeled T-1 through T-62) with their material type, Hazen-Williams coefficient, diameter, flow rate, velocity, and head loss. For most pipes, the flow rate, velocity, and head loss values are listed as (N/A). Pipe T-18 is HDPE with a diameter of 600mm, flow rate of 32.617 L/s, velocity of 0.12 m/s and head loss of 0.00m. Pipe T-38 is also HDPE but with a diameter of 600mm, larger flow rate of 278.547 L/s, velocity of 0.99 m/s and head loss of 3.39m