Professional Documents
Culture Documents
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity. At the end of your
attempt click "Submit" to have your activity evaluated. If you wish to make the
second attempt, click on the "Restart" button, and answer the questionnaire again.
At the end click on "Show answer".
1. According to the land use keys presented below and according to their colors,
which would be the correct grid, using modal sampling?
Activity GPS data acquisition
GPS acquisition questionnaire
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity.
At the end of your attempt click "Submit" to have your activity evaluated.
If you wish to make the second attempt, click on the "Restart" button and answer
the questionnaire again.
At the end click on "Show answer".
2. Select the sources of error that you can avoid when performing a GPS survey.
5. What are the advantages of creating the template before the survey?
It only allows the survey route to be carried out in order to count the time of the
route.
It allows taking photographs of the survey to give evidence of the type of
entities surveyed.
Allows to program and customize the survey of entities (point, line or polygon),
identify features of interest, take pictures, etc. correct
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity.
At the end of your attempt click "Submit" to have your activity evaluated.
If you wish to make the second attempt, click on the "Restart" button and answer
the questionnaire again.
At the end click on "Show answer".
The plate should be visible in the frame taken and the angle of the shot should
be as close to perpendicular to the plane of the plate as possible.
That the plate is viewed from an angle other than perpendicular to the Earth's
surface.
The image resolution should be low and the angle of acquisition should be no
more than 30° from the perpendicular to the plate.
The plate must be visible and the image resolution must be high (less than one
meter). correct
The definition of the exact use to be given to the geospatial information. correct
The maximum size of the hard disk I will have to store the information.
The budget to spend on very high resolution geospatial information and
storage.
The cost of storage to be used and the speed of information retrieval.
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity. At the end of your
attempt click "Submit" to have your activity evaluated. If you wish to make the
second attempt, click on the "Restart" button, then answer the questionnaire again.
At the end click on "Show answer".
2. If we have two street segments that intersect in the middle, how many arc
segments must a correct digitization contain?
If in the mapping of the block or block in which we live we could see that our
property overlaps with the neighboring property, what could be one of the
consequences that would affect us due to the poor digitization?
The cadastral tax to be paid will include the total area of both properties.
There will be problems with land use.
Re-build fences or walls to delimit the property.
The overlapping area may cause boundary disputes and may require a new
topographic survey. correct
5. During the digitizing process with the QGIS tool the intersection avoidance
option is used to:
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity. At the end of your
attempt click "Submit" to have your activity evaluated. If you wish to make the
second attempt, click on the "Restart" button, then answer the questionnaire again.
At the end click on "Show answer".
2. Look at the following box diagram and choose the correct option.
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity. At the end of your
attempt click "Submit" to have your activity evaluated. If you wish to make the
second attempt, click on the "Restart" button, then answer the questionnaire again.
At the end click on "Show answer".
1. This geoprocess is usually used to narrow down your data to an area of interest,
which geoprocess is used to select a subset of information?
Intersection.
Buffer.
Cutting. correct
Dissolve.
2. These are characteristics of the resulting layers when using the Buffer
geoprocessing:
3.You want to know what is the area affected by the construction of a new road
and the area affected covers a fixed distance to both sides of the road, which
geoprocess would you use?
Buffer. correct
Union.
Dissolve.
Intersection.
4. You have a layer containing 4500 electoral sections and each of them belongs
to only one electoral district out of the 30 possible ones, what process is required
to generate an output layer with the district boundaries?
Cutting.
Dissolve. correct
Intersect.
Buffer.
quest
Evaluation. Effective communication through maps
Indications:
After completing the learning activity, answer the following questions. Remember
that you only have two attempts to complete the evaluation. At the end of your
attempt click on submit to have your activity evaluated.
1. What reference map would you use as the geographical context for your main
map?
correct
2. What symbolism or legend would you use for your map design?
correct
3. What graphic scale would you use for the design of your map?
correct
4. Considering the above design of the graphic scale, which geographical north
would you use?
correct
5. What grid would you use for the design of your map?
correct
Indications:
After reviewing the materials related to the topic, answer the following questions.
Remember that you only have two attempts to solve the activity. At the end of your
attempt click "Submit" to have your activity evaluated. If you wish to make the
second attempt, click on the "Restart" button, and then answer the questionnaire
again. At the end click on "Show answer".
SHP
XLS correct
KML
XLS,XLSX
Polygons, lines.
Polygons, photos.
Polygons, polyhedra.
Polygons, points. correct
SHP
XLS
KML correct
KMZ