Professional Documents
Culture Documents
IFS Company Profile
IFS Company Profile
COMPANY PROFILE
♦ Mailing Address
1
COMPANY PROFILE
2
COMPANY PROFILE
Plano, Texas
Market Manager – Power/Environmental Jim Raydo
Tyler, Texas
General Manager John McIntyre
Operations Manager Michael Roberts
Draftsmen 6
3. Customer Support: 4
4. Purchasing: 5
5. Quality Control: 3
6. Shop:
Number of Supervisors 5
Number of Inspectors 1
Average Number of All Production Workers 50
Average Number of Code Welders 15
Painters 3
Instrument Fitters 7
Mechanists 7
Pump Mechanics 4
3
COMPANY PROFILE
Anhydrous Ammonia Wellhead Fuel Gas Burner Fuel Gas Boiler Feedwater
Storage & Unloading Conditioning Packages Conditioning Tank/Supply
Packages Packages Packages
Aqueous Ammonia Water Injection/Crude Refinery Ammonia High & Low Pressure
Storage & Unloading Oil Pump Packages Flow Control Condensate
Packages Packages (FCCU) Packages
Pressure Reduction Wellhead Instrument Volatile Organic Plant Water Booster
Station Packages Fuel Gas Conditioning Compound Vapor Packages
Packages Control Packages
Crude Oil Heating Unloading/Loading Compressor Seal Gas Lube Oil Blending
Packages Packages Conditioning Packages
Packages
Tyler, TX Facility
4
COMPANY PROFILE
♦ Facilities
3. Coatings:
Enclosed Grit Blasting 20’ x 38’ x 12’
Enclosed Heated Paint Booth 20’ x 48.5’ x 16’
Enclosed Paint Booth 12’ x 12’ x 8’
Outdoor Sand Blasting Pad
4. Maximum Size & Weight of Fabricated Units Inside the Shops Only
24’ Wide by 25’ High at 100,000 Pounds Maximum
In-House - Three personnel are ASNT Level II for Liquid Penetrant, Magnetic Particle &
Radiographic Film interpretation. Positive material identification.
Certifications:
ASME Code Stamp Certificates, U, UM, R
National Board Certificate
UL Panel Shop Certificate
IEC Control Panel Certification
ISO 9001:2008
6
COMPANY PROFILE
7
INTEGRATED FLOW SOLUTIONS
PAGE 2
THIS MANUAL OUTLINES AND DEFINES THE QUALITY CONTROL PROGRAM TO ENSURE THAT
THE COMPANY IS AT ALL TIMES IN COMPLIANCE WITH THE MINIMUM REQUIREMENTS OF THE
ASME BOILER AND PRESSURE VESSEL CODE SECTION VIII, DIVISION 1 AND THE NATIONAL
THE PRESIDENT FULLY SUPPORTS THIS QUALITY CONTROL SYSTEM AND GIVES THE
SOLUTIONS. THE CERTIFIED INDIVIDUAL HAS THE ASME AUTHORITY CONCERNING THE
FOR FINAL RESOLUTION WITHOUT COMPROMISE OF THE CODE OR THIS QUALITY CONTROL
MANUAL.
PRESIDENT DATE
Certificate of Compliance
Certificate: 1621441 Master Contract: 228216
The products listed below are eligible to bear the CSA Mark shown
PRODUCTS
CLASS 3211 09 - INDUSTRIAL CONTROL EQUIPMENT - Special (Custom) Industrial
Control Assemblies
!" # $
# # $ ! % " " &' ( ) )* !"
+ " , ! ' " ' #
APPLICABLE REQUIREMENTS