Professional Documents
Culture Documents
Reliability Engineering Final Examination Ni Prince
Reliability Engineering Final Examination Ni Prince
* Required
EXAMINATION
To obtain the information necessary for design improvement of those items whose
inherent reliability proves inadequate.
To ensure realization of the inherent safety and reliability levels of the aircraft.
To ensure that the aircraft maintenance program tasks are effective, and their
intervals are acceptable.
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 1/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
JAA was an associated body of the European Civil Aviation Conference (ECAC) *
representing the civil aviation regulatory authorities of a number of European
States who have agreed to co-operate in developing and implementing common
safety regulatory standards and procedures.
FALSE
TRUE
MAINTENANCE
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 2/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
It is used for event waiting times when the event process is not completely *
random.
Exponential Distribution
Weibull Distribution
Gamma Distribution
Probability Distribution
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 3/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
It is commonly used to describe the distribution of lifetime data and the time to *
wait for the next event.
Weibull Distribution
Gamma Distribution
Probability Distribution
Exponential Distribution
It is a relative ranking within the scope of the specific FMEA and is determined *
how serious the outturn of a certain fault.
SEVERITY
Weibull Distribution
Gamma Distribution
Exponential Distribution
Probability Distribution
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 4/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
An example, If someone wants to find out how satisfied the customers are with *
the level of customer service that was given by the employees, and a survey was
send out with three questions designed to measure overall satisfaction. Choices
for each question are: Strongly agree/Agree/Neutral/Disagree/Strongly disagree.
This/These is/are an example/s of what measure?
Parallel Forms
Internal Consistency
Test-Retest
Split Half
Cronbach's Alpha
Inter Rater
Inter Observer
MTTF
FMECA
MTTR
FTA
RCM
RBD
FMEA
Probability Distribution
MTBF
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 5/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
False
True
Probability Distribution
Predicting failures.
This/These is/are the common metrics that is/are used to effectively determine *
and addressed faults.
MTBF
Probability Distribution
MTTF
MTTR
RCM
FMECA
FMEA
FTA
RBD
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 6/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
One of its goals is applying the methods of increasing the reliability of new *
designs and researching data for the reliability of a product.
Your answer
Given are two components namely A and B. When at least one component *
becomes successful, then the whole system becomes successful. What is the
system used for this example?
Your answer
True
False
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 7/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
TRUE
FALSE
An example, test on a Saturday, then again after two weeks. The two scores are *
then correlated. This/These is/are an example/s of what measure?
Split Half
Inter Rater
Parallel Forms
Test-Retest
Cronbach's Alpha
Inter Observer
Internal Consistency
Boolean Logic
Schematic Diagram
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 8/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
A system that is arranged in a parallel system with two or more elements having *
the same function to increase its reliability.
Your answer
FTA, FMEA, FMECA requires deep knowledge about the asset and its reliability *
but differ only in the approach of doing the analysis.
TRUE
FALSE
Your answer
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 9/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
Your answer
Given are two components namely A and B. When both components become *
successful, then the whole system becomes successful. What is the system used
for this example?
Your answer
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 10/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
Your answer
Your answer
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 11/12
12/15/22, 1:37 PM RELIABILITY ENGINEERING FINAL EXAMINATION
It is the possibility that a product will work fully in a given interval under different *
circumstances.
Your answer
Removal, installation, and repair of landing gear tires and shock cords
This form was created inside of PATTS College of Aeronautics. Report Abuse
Forms
https://docs.google.com/forms/d/e/1FAIpQLSf8PAe7aXhhoa6uOUe9-AhHMYe6jA6y2b2ZSMi9ad5G0-NHjg/formResponse 12/12