Professional Documents
Culture Documents
1 INTRODUCTION ..................................................................................................... 2
1.1 GREEN CONSTRUCTION ...................................................................................... 2
1.1.1 Green Construction and Sustainability 2
1.1.2 Reference 2
1.1.3 Green Construction Regulations and Environmental Assessment Tools 2
1.1.4 Green Building Definition 2
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 2
Part 01: Introduction
1 INTRODUCTION
1 Buildings, infrastructure and the environment are inextricably linked. Energy, water, materials
and land are all consumed in the construction and operation of buildings and infrastructure.
These built structures in turn become part of living environment, affecting living conditions,
social well-being and health. It is important to explore environmentally and economically
sound design and development techniques in order to design buildings and infrastructure that
are sustainable, healthy and affordable, and encourage innovation in buildings and
infrastructure systems and designs.
g
tin
2 The concept of sustainability in building and construction has evolved over many years. The
initial concept was on how to deal with the issue of limited resources, especially energy, and
c
on how to reduce impacts on the natural environment. Emphasis was placed on technical
ra
issues such as materials, building components, construction technologies and energy related
design concepts. Recently non-technical issues become appreciated such as economic,
nt
social sustainability and cultural heritage aspects of the built environment. Also, there are
co
greater attention to create more green buildings by upgrading the existing buildings through
the application of new developments or the invention and use of innovative technologies for
energy and material savings.
&
1.1.2 Reference
ng
Global Sustainability Assessment System (GSAS) - v2.1 2013, Gulf Organization for
tra
Research and Development, Qatar, formerly known as (QSAS) (Note: QCS reference shall
be limited only to this particular version of GSAS and non-other)
a
1 Many countries have developed their own standards for green building or energy efficiency
for buildings and Building Environmental Assessment tools. Now there are many of building
al
rating systems tools and guidelines in the world currently in use. A new sustainability
assessment system known as GSAS (GLOBAL Sustainability Assessment System) is
referred to herein in this document.
1 Green building is the process through which buildings are designed, constructed and
operated to reduce natural resources consumption, eliminate environmental degradation and
enhance social and economic aspects of humans.
END OF PART
QCS 2014 Section 07: Green Constructions Page 1
Part 02: QCS Green Building
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 2
Part 02: QCS Green Building
2.1 SCOPE
2.1.1 General
1 This section specifies minimum environmental performance requirements that apply to the
design, construction and operations of new buildings.
g
3 The environmental performance criteria apply to all new buildings for those building
tin
typologies specified and shall apply to:
(a) Buildings under design but not yet constructed (i.e. pre-construction);
c
ra
(b) Buildings under construction; and
(c) Buildings constructed prior to hand over.
nt
co
4 For buildings under construction or constructed and not handed over, the minimum
environmental performance requirements shall apply as far as is reasonably possible without
the need to undertake a major re-design and retrofit. Where building owners, designers or
&
contractors, etc. judge that any re-design or retrofit to meet the environmental performance
requirements specified herein is not reasonable, the relevant Qatari authorities / government
ng
agencies reserve the right to ask for a justification to explain such a decision.
di
5 The Engineer shall specify the applicable Green Building Assessment System for the QCS’s
Building typologies and to assess compliance with QCS’s Green Building Requirements.
tra
6 The minimum environmental performance requirements specified herein have been derived
a
7 The Engineer shall ensure compliance with QCS’s minimum sustainable building
-s
8 QCS 2014 encourage the use of any environmental or sustainability performance criteria in
addition to those environmental performance criteria specified to help design, construct and
operate better buildings.
2.1.2 References
Global Sustainability Assessment System (GSAS) v2.1-2013, Gulf Organisation for Research
and Development, Qatar
QCS 2014 Section 07: Green Constructions Page 3
Part 02: QCS Green Building
1 The values listed herein for the Commercial, Health Centres, Education, Mosques, and Light
Industries Schemes and Typologies shall be considered as the minimum requirements for
the applicable criteria (Table 3).
1 COMMERCIAL: Types include Spaces that Serves various functions such as offices,
2
conference rooms, foyers, retail spaces, and ancillary areas, with built up area of 10000 m
or more.
g
tin
3 PUBLIC BUIDLINGS: Types include:
c
(a) RAIL BUILDINGS: Types include spaces that serve various functions of a railway
ra
station such as but not necessarily limited to platform/concourse, offices, station
control room, ticketing, retail, food/beverage areas, and ancillary areas.
(b) nt
SPORTS: Facilities include indoor or outdoor competition areas, fitness suites, locker
co
facilities, retail spaces, offices, restaurants, and common areas
(c) EDUCATION BUILDINGS: Types include educational facilities for students in
th
&
4 LIGHT INDUSTRIES BUILDINGS: Types include both operational and office areas as well as
ar
1 The minimum QCS’s requirements unless other values specified by the relevant authorities.
Table 1: Green Building Categories & Criteria
Commercial, Governmental
Energy Demand
Education, Mosques &
Performance
ENERGY EPC ≤ 1.0 other religious buildings,
Energy Delivery Light Industry, Health
Performance Centres, Railways, Sports
WPC ≤ 1.0
Commercial,
Governmental, Education,
WATER Water Consumption Mosques, Light Industries,
Health Centres,
Railways, Sports
QCS 2014 Section 07: Green Constructions Page 4
Part 02: QCS Green Building
Commercial,
Natural Ventilation Can be
Governmental, Education,
Utilized(x)
g
Mosques,
0 < X ) month of the year(
Light Industry
tin
INDOOR
ENVIRONMENT Comply with ASHRAE
Natural Ventilation Health Centres
Standard
c
Natural Ventilation Can be
ra
Utilized(x) Sports
0 < X (month of the year)
Standard nt
Comply with ASHRAE
Railways (above ground)
co
no existence of equipment Commercial, Education,
with efficiency less than Mosques,
Mechanical Ventilation
specified in ASHRAE 90.1- Light Industry
2010 Health Centres, Railways
&
Commercial, Governmental
Education,
ng
Mosques,
Low-Emitting Materials VOC_emi_total ≤100%
Light Industry
Health Centres, Sports,
di
Railways
Commercial, Governmental
tra
1 Building owners, designers or contractors, etc. shall provide the relevant authorities with a
report that shows how the minimum environmental requirements have been met. The report
shall include:
g
tin
(e) All other information necessary to demonstrate how the environmental performance
requirements have been met.
c
ra
END OF PART
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 1
Part 03: Energy
g
3.3.4 Measurement (EPCdel) 5
tin
3.3.5 Score (EPCdel) 6
c
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 2
Part 03: Energy
3 ENERGY [E]
3.1 GENERAL
3.1.1 Scope
1 The Energy category consists of factors associated with energy demand of buildings, the
efficiency of energy delivery, and the use of fossil energy sources that result in harmful
emissions and pollution.
(a) Impacts: Negative impacts resulting from energy use and unsustainable practices
include:
(i) Climate Change
g
tin
(ii) Fossil Fuel Depletion
(iii) Air Pollution
c
ra
(iv) Human Comfort & Health
(b) Mitigate Impact: Factors that could mitigate environmental impacts due to energy use
include: nt
co
(i) Designing the building to lower its energy demand
(ii) Selecting efficient building systems
&
3.1.2 Reference
-s
Global Sustainability Assessment System (GSAS) – V2.1 2013, Gulf Organization for
Research and Development , Qatar (Note: QCS reference shall be limited only to this
particular version of GSAS and non-other).
3.1.3 Abbreviations
g
Qdesign
2
the building thermal energy demand in kwh/m /yr. which takes into
tin
account the energy losses (transmission and ventilation), heat
gains (solar, internal and system heat losses), and the dynamic
c
parameter (loss utilization factor).
ra
Qref_nd the reference value used in the GSAS Scoring method for energy
NOX,SOX nt 2
demand for the building type in kwh/m /yr.
2
The emitted masses of NOX & SOX in gm./m /yr. calculated from
co
the net delivered energy and emission coefficients.
NOXref,SOXref the reference values used in the GSAS scoring method for NOX &
2
&
3.2.1 Scope
di
tra
1 The energy demand performance shall be measured for the following categories of
buildings:
a
Commercial
-s
Governmental
al
Education
Mosques & other religious buildings
Light Industry
Health Centres
Railways Buildings
Sports
3.2.2 Description
1 Establish energy demand performance levels for the building in order to reduce
environmental and economic impacts associated with excessive energy use.
QCS 2014 Section 07: Green Constructions Page 4
Part 03: Energy
1 The Engineer shall Calculate Building performance in relation to the baseline as specified
below. All calculations will adhere to the GSAS Energy Application document.
1 The Engineer shall calculate the EPCnd value based on building data and cooling energy
needs of the project as per the energy performance standard calculation tool (EPSCT).
2 Calculated EPCnd = Qdesign / Qref_nd The Qdesign is calculated according to the GSAS Energy
Application document.
g
tin
4 Education: With Baseline reference Qref_nd = 122* fop.education [kWh/m²/yr]. where fop.education is
the operation factor for education typologies. The Qdesign and fop,school are calculated according
c
to the GSAS Energy Application document.
ra
5 Mosques & other religious buildings: With Baseline reference Qref_nd = 170 [kWh/m²/yr] . The
nt
Qdesign is calculated according to the GSAS Energy Application document.
co
6 Health Centers: The Qref_nd are area weighted average calculated according to the reference
guidelines document.
&
7 Railways: The Qref_nd are area weighted average calculated according to the refference
ng
guidelines document.
8 Sports : the Engineer shall determine energy demand performance in two steps. Step 1, the
di
project will use the Energy Performance Calculator to determine the Energy demand (Q nd.fc,I)
tra
for each functional component (FC) of the project. Step 2, the project will enter the Qnd,fc,I for
each FC in the composition sheet in the energy calculator to determine the aggregated
criterion score for the entire sports facility.
a
ar
1 The Recommended minimum requirement * value for EPCnd shall be as per table 2:
Note : (*) minimum QCS’s requirements unless other values specified by the relevant
authority
Table 2: EPCnd Values
3.3.1 Scope
1 The energy delivery performance shall be measured for the following categories of buildings:
QCS 2014 Section 07: Green Constructions Page 5
Part 03: Energy
Education
Mosques & other religious buildings
Light Industry
Health Centres
Railways Buildings
Sports
g
tin
3.3.2 Description
c
1 The Engineer shall establish delivered energy performance levels of the project in order to
ra
reduce environmental and economic impacts associated with excessive energy use.
1 The Engineer shall complete the Energy Performance Standard Calculation Tool (EPSCT) to
determine the EPCdel value based on building data, HVAC specifications, lighting system,
di
2 Calculated EPCdel =Edel / Eref_del the Edel is calculated according to the GSAS Energy
Application document.
a
ar
4 Education With Baseline reference Eref_del = 88* fop_education [kWh/m²/yr]. where fop_education is the
operation factor forEducation Typologies. The Edelivery and fop,education are calculated according
al
5 Mosques & other religious buildings: With Baseline reference Eref_del = 82 [kWh/m²/yr]. The
Edelivery is calculated according to the GSAS Energy Application document.
7 Sports Facilities: The Engineer shall determine energy delivery performance in two steps.
Step 1, the Engineer shall use the Energy performance calculator to determine the delivered
energy (Edel,fc,i) for each functional component (FC) of the project. Step 2, the Engineer shall
enter the Edel,fc,I for each FC in the energy score calculator to determine the aggregated
criterion score for the entire sports facility.
QCS 2014 Section 07: Green Constructions Page 6
Part 03: Energy
1 The Recommended minimum requirments* EPCdel value shall be categorised as per table
4.
Note : (*) minimum QCS’s requirements unless other values specified by the relevant
authority
END OF PART
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 1
Part 04: Water
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 2
Part 04: Water
4 WATER [W]
4.1 GENERAL
4.1.1 Scope
1 The Water category consists of factors associated with water consumption and its
associated burden on municipal supply and treatment systems.
(a) Impacts: Environmental impacts resulting from water consumption and unsustainable
practices include:
(i) Water depletion
(b) Mitigate Impact: Factors that could mitigate environmental impact and lower demand
g
on water include:
tin
(i) Specifying efficient plumbing fixtures
c
(ii) Creating a system for the collection and storage of rainwater
ra
(iii) On-site treatment of water for later reuse
(iv) nt
Designing a landscaping plan that minimizes the need for irrigation.
co
The recommended criteria is Water Performance Coefficient (WPC) [W.1]
&
4.1.2 Reference
ng
Research and Development, Qatar (Note: QCS reference shall be limited only to this
tra
4.2.1 Scope
-s
1 The Water consumption will be measured for the following categories of buildings listed in
al
table 1:
Table 1: Building Typologies
Commercial
Governmental
Education
Mosques & other religious buildings
Light Industry
Health Centres
Railways Buildings
Sports
QCS 2014 Section 07: Green Constructions Page 3
Part 04: Water
4.2.2 Description
1 Minimize water consumption in order to reduce the burden on municipal supply and
treatment systems.
1 The Engineer shall demonstrate conservation in the use of water in relation to the baseline
and targets outlined in the Water Consumption Calculator.
1 The Engineer shall determine cumulative water consumption [Water Performance Coefficient
(WPC)] using the Water Consumption Calculator. Cumulative water consumption is
g
determined by several input parameters including:
tin
(a) The project site area and the number of full time staff, students, or residents and
visitors occupying the building
c
ra
(b) Specifications for plumbing fixtures
(c) Landscaping and irrigation plan
nt
co
(d) Rain and storm water collection and reuse plan
(e) Grey and black water treatment and reuse plan
&
2 Based on input parameters provided by the project, the application conducts multiple
calculations to determine the building’s estimated water consumption. Three estimated
ng
calculation values, Water Consumption for occupants (WCcal_occupant), Water Consumption for
irrigation (WCcal_irrigation), Water Supply from reuse strategies (WScal_reuse) are computed by
di
the calculator. The annual net water demand is calculated by subtracting water supply
tra
Coefficient (WPC).
ar
-s
al
3 For each building type, the equations to calculate reference values apply to all buildings
regardless of operating duration, occupancy density and site area. A different reference
value will be calculated for project buildings with varying site and operational characteristics,
and the resulting WPC will therefore be applicable across the entire spectrum of each
building type.
(a) The Referenced Water Consumption for Occupants is:
WCref_occupant = A x Operating Hours x Occupants
Where:
Operating Hours = 8 (hours per day) x 20 (days per month) x 12 (months per year)
QCS 2014 Section 07: Green Constructions Page 4
Part 04: Water
Occupants = The total number of full time employees per day + the total number of
visitors per day
(b) The Referenced Water Consumption for irrigation is:
2
WCref.,irrigation = B x 365 (days per year) x 24 (hours per day) x Site Area (m )
Reference values A and B can be found for the different typologies in the following table:
g
0.003888 0.000002
religious buildings
tin
Light Industry 0.005355 0.000004
c
Sports N/A N/A
ra
These typologies have multiple occupant reference values which are listed in further detail
in the following sections.
nt
co
4 Education
(a) Additional input parameters required:
&
5 Mosques:
di
* Number of worshippers visiting the mosque, both on a daily basis and during times of
full occupancy.
a
6 Light Industry
Additional input parameters required:
Number of full time employees and visitors occupying the building
*
4.2.5 Score
The minimum Requirement values by QCS for Water Performance Coefficient shall be:
QCS 2014 Section 07: Green Constructions Page 5
Part 04: Water
Note : (*) minimum QCS’s requirements unless other values specified by the relevant
authority
2 EDUCATION
Table 4: minimum score for Education Typology
g
tin
3 MOSQUES
c
Table 5: minimum score for Mosques Typology
ra
WPC(X) 0.89 < X ≤ 1.0
nt
co
4 LIGHT INDUSTRIES
Table 6: minimum score for Light Industry Typology
&
5 HEALTH CENTRES
di
6 RAILWAY TEMINALS
ar
END OF PART
QCS 2014 Section 07 : Green Constructions Page 1
Part 05 : Indoor Environment
g
5.3.2 DESCRIPTION 5
tin
5.3.3 MEASUREMENT PRINCIPLE 5
5.3.4 MEASUREMENT (NATURAL VENTILATION) 6
c
5.3.5 SCORE* 6
ra
5.4 INDOOR ENVIRONMENT [IE.3] : Mechanical Ventilation ...................................................... 7
5.4.1
5.4.2
SCOPE
DESCRIPTION nt 7
7
co
5.4.3 MEASUREMENT PRINCIPLE 7
5.4.4 MEASUREMENT (MECHANICAL VENTILATION) 7
*
5.4.5 SCORE (MECHANICAL VENTILATION) 8
&
5.5.1 SCOPE 8
5.5.2 DESCRIPTION 8
di
5.1 GENERAL
5.1.1 Scope
1 The Indoor Environment category consists of factors associated with indoor environmental
quality such as thermal comfort, air quality, acoustic quality, and light quality..
(a) Impacts: Impacts resulting from ineffective control and design of the indoor
environment include:
(i) Climate Change
(ii) Fossil Fuel Depletion
g
(iii) Air Pollution
tin
(iv) Human Comfort & Health
c
(b) Mitigate Impact: Factors that could improve indoor environmental quality include:
ra
(i) Monitoring air temperature and quality and adjusting or calibrating as
appropriate
nt
co
(ii) Maximizing the time period that the building can utilize natural ventilation
(iii) Designing an adequate mechanical ventilation system
&
(iv) Ensuring adequate illuminance levels for visiual performance and comfort
ng
(viii) Controlling the amount of noise produced by or transferred from the building
interior and exterior
a
2 The Public and Government Buildings are to be considered as commercial for the purpose of
Indoor Environment calculation as applicable.
5.1.2 Reference
Global Sustainability Assessment System (GSAS) - v2.1 2013, Gulf Organization for
Research and Development (GORD), Qatar (Note: QCS reference shall be limited only to
this particular version of GSAS and non-other), And American Society of Heating,
Refrigerating and Air-Conditioning Engineers (ASHRAE)
5.2.1 Scope
1 The Indoor Environment for Thermal Comfort shall be measured for the following categories
of the buildings:
g
Commercial
tin
Governmental
Education
c
ra
Mosques & other religious buildings
Light Industry
Health Centres
nt
co
Railways Terminals
Sports Facilities
&
ng
5.2.2 Description
1 The Project shall provide a thermaly comfortable environment to ensure the comfort and
di
1 The Engineer shall calculate the system capacity and either PMV or ADPI Values for the
ar
hottest hour of the year for the worst case for all applicable occupied spaces
-s
2 Sport Facilities.
al
The Project shall also Calculate the heat loads for all critical seats for the hottest outdoor
conditions for scheduled events.
1 The Project shall complete the Thermal Comfort Calculator (Considering GSAS Assessment
System or any other recommended system) in order to compute PMV or ADPI values and
demonstrate that system Capacity can meet the peak cooling loads for the worst case for all
typical occupied spaces.
(a) System Capacity : The capacity of the system should be properly sized to meet the
peak cooling loads of critical spaces. All projects will calculate the peak cooling loads
for the hottest hour of the year.
QCS 2014 Section 07 : Green Constructions Page 4
Part 05 : Indoor Environment
(b) PMV values: The project will evaluate all critical spaces and perform thermal comfort
assessment for the hottest hour of the year. Calculate PMV values of different
positions in critical spaces such as different positions relative to window and diffuser
locations and select the worst PMV value for assessment.
(c) ADPI values: The project will evaluate the selected worst case for each typical space
and perform thermal comfort assessment for the hottest hour of the year in terms of
Air Diffusion Performance Index.
2 The following table outlines the measurement type and typical spaces used in the calculation
according to the appropriate typology:
g
TYPOLOGY MEASUREMENT TYPE TYPICAL SPACES
tin
Commercial PMV Office, Reception Areas
c
ra
Education ADPI Classrooms, Offices, Special
nt Functional Spaces.
co
Mosques ADPI Prayer Halls
&
*
5.2.5 Score
ar
Note: (*) minimum QCS’s requirements unless other values specified by the relevant
-s
authority
al
PMV 1.5 < PMV ≤ 2.0 Under the system capacity meeting the peak load
ADPI 80 ≤ ADPI< 85 Under the system capacity meeting the peak load
QCS 2014 Section 07 : Green Constructions Page 5
Part 05 : Indoor Environment
The Building will Comply with ASHRAE Standards- Design Manual for Hospital and Clinics
PMV 1.5 < PMV ≤ 2.0 Under the system capacity meeting the peak load
g
b. for Exposed Spectator Seating (b)
tin
ADPI 1.185 < b ≤ 1.600 worest case heat load
c
ra
5.3 INDOOR ENVIRONMENT [IE.2] NATURAL VENTILATION
5.3.1 Scope nt
co
1 The Indoor Environment for Natural Ventilation shall be measured for the following
categories of the buildings.
&
Commercial
Governmental
di
Education
tra
Health Centres
Rail Buildings
-s
Sports
al
5.3.2 Description
1 The Project shall encourage effective natural ventilation strategies in conjunction with
mechanically ventilated systems.
1 The Engineer shall maximize the number of days that the building can utilize natural
ventilation, either through user operable windows or through controlled opening
QCS 2014 Section 07 : Green Constructions Page 6
Part 05 : Indoor Environment
1 All projects using operable windows will complete the Natural Ventilation Calculator to
determine the number of months that all typical spaces can utilize natural ventilation by
verifying minimum fresh air supply to guarantee indoor air quality as recommended in
ASHRAE 62.1-2010. All projects using mechanical ventilation systems will demonstrate
thorough calculation and/or simulations the number of months a project can utilize natural
ventilation. Exclude all circulation areas from this measurement.
2 The following table outlines the typical spaces used in the calculation according to the
appropriate typology:
Table 7: Typical Spaces for Natural Ventilation
g
Typology Typical Spaces
M
tin
Commercial Office, Reception areas
Education Classrooms, Libraries
c
ra
Mosques Prayer Halls
Light Industry Office areas
Health
Centres
nt
Staff areas, Library/Seminar rooms, Dining rooms
co
(a) LIGHT INDUSTRY
&
(i) Operational Areas associated with the industrial process are not included as
part of this criterion.
ng
(i) All Projects will undertake a full thermal model analysisto calculate the air flow
provided by the natural ventilation to determine if each typical space can
tra
(ii) Typical Spaces to be assessed against the ASHRAE Standards include: Satff
areas , Office accommodation, Library /Seminar rooms , Dining rooms .Natural
-s
5.3.5 SCORE*
5.4.1 Scope
1 The Indoor Environment for Mechanical Ventilation shall be measured for the following
categories of the buildings
Table 10: Building Typologies
Commercial
Governmental
Education
g
tin
Mosques
Light Industry
c
Health Centres
ra
Railways
5.4.2 Description
nt
co
1 The Project shall provide effective mechanical ventilation to ensure occupant comfort and
&
health.
ng
1 The Engineer shall ensure that mechanical ventilation in all primary occupancy areas meets
the minimum requirements of ASHRAE 62.1-2010 and the system requirements in ASHRAE
tra
90.1-2010.
1 The mechanical system shall meet the minimum requirements of ASHRAE 62.1-2010,
ASHRAE 90.1-2007. These requirements include, but are not limited to:
-s
(a) Mechanical equipment must meet minimum Efficiency standards, and be properly
al
2 MEASUREMENT
(a) LIGHT INDUSTRY
(i) Operational Areas associated with the industrial process are not included as
part of this criterion.
(b) RAILWAYS
This Criteria applies to both underground or overground stations.
QCS 2014 Section 07 : Green Constructions Page 8
Part 05 : Indoor Environment
*
5.4.5 Score (Mechanical Ventilation)
g
5.5.1 Scope
tin
1 The Indoor Environment for Low-Emitting Materials shall be measured for the following
c
categories of the buildings.
ra
Table 12: Building Typologies
Commercial nt
co
Governmental
Education
&
Mosques
ng
Light Industry
Health Centers
di
Railways
tra
Sports
a
5.5.2 Description
ar
1 The project shall meet the minimum emissions targets for indoor materials and finishes to
-s
1 The Engineer shall choose materials and finishes that minimize Volatile Organic Compounds
(VOC) emissions.
1 The Engineer shall complete the Low-Emitting Materials Calculator to evaluate the measured
VOC contents of specified indoor materials.
2 The Engineer shall develop a plan to specify materials with low VOC emission rates as found
in the Low-Emitting Materials Calculator.
Exclude materials used in spaces that are exposed to the exterior.
3 RAILWAYS: This Criteria applies to both underground and overground stations.
QCS 2014 Section 07 : Green Constructions Page 9
Part 05 : Indoor Environment
(*) minimum QCS’s requirements unless other values specified by the relevant authority
END OF PART
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Building Page 1
Part 06: Cultural & Economic Value
6.2 CULTURAL & ECONOMIC VALUE- SUPPORT OF NATIONAL gcc ECONOMY [ce.1] ....... 2
6.2.1 SCOPE 2
6.2.2 DESCRIPTION 3
6.2.3 MEASUREMENT PRINCIPLE 3
6.2.4 MEASUREMENT (SUPPORT OF NATIONAL GCC ECONOMY) 3
6.2.5 SCORE 3
6.3 CULTURAL & ECONOMIC VALUE - Heritage & Cultural Identity [ce.2] ................................ 3
6.3.1 SCOPE 3
g
6.3.2 DESCRIPTION 4
tin
6.3.3 MEASUREMENT PRINCIPLE 4
6.3.4 MEASUREMENT (HERITAGE AND CULTUAL IDENTITY ) 4
c
6.3.5 SCORE 4
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Building Page 2
Part 06: Cultural & Economic Value
6.1 GENERAL
6.1.1 Scope
1 The Cultural and Econmic Value category consists of factors associated with cultural
conservation and support of the local economy.
(a) Impacts: Impacts resulting from lack of cultural conservation and economic planning
include:
g
tin
(b) Mitigate Impact: Factors that could mitigate impact include:
(i) Encouraging designs to align with cultural identity and traditions
c
ra
(ii) Designing for a seamless integration into the existing cultural fabric
(iii) Planning for the use of local materials and workforce
(c) The recommended sub-criteria Includes: nt
co
(i) Support of National Economy
&
6.1.2 Reference
Research and development, Qatar (Note: QCS reference shall be limited only to this
particular version of GSAS and non-other), [Refer to Section 7 Part 1 for the entire list of
a
reference]
ar
ECONOMY [CE.1]
al
6.2.1 Scope
1 The Cultural & Economic Value for Support of National Economy will be measured for the
following categories of the buildings.
Table 1: Building Typology
Commercial & Governmental
Education
Mosques
Light Industry
Health Centers
Sports
Railways
QCS 2014 Section 07: Green Building Page 3
Part 06: Cultural & Economic Value
6.2.2 Description
1 The Project shall maximize the percentage of construction expenditures for goods and
services originating from the national GCC economy (Gulf Cooperation Council- GCC)
1 The Engineer shall maximize the percentage of construction expenditure benefitting the
national GCC economy.
1 The Engineer shall complete the Support of National GCC Economy Calculator to determine
the amount of construction expenditure benefitting the national economy, as a percentage of
g
total construction costs. Construction expenditures include, but are not limited to, the
tin
following:
(a) Laborers/Contractors
c
ra
(b) Building Materials
(c) Construction Materials
(d) Construction Tools/Equipment nt
co
(e) Temporary Facilities/Rental Spaces
&
6.2.5 Score
di
6.3.1 Scope
1 The Cultural & Economic Value for Heritage and Cultural Identity shall be measured for the
following categories of the buildings.
Table 3: Building Typologies
Commercial
Governmental
Education
Mosques
Health Centers
Sports
Railways
QCS 2014 Section 07: Green Building Page 4
Part 06: Cultural & Economic Value
6.3.2 Description
1 The Project shall encourage design expression that will align with and strengthen cultural
identity and traditions.
1 The Engineer shall develop a concept brief outlining design strategies. The Qatar Heritage
organization and/or an independent expert panel assigned by the Certification Authority will
assess the design and determine whether the project meets the goals outlined in the mission
statement.
g
1 All projects shall develop a concept brief to demonstrate the following through drawings and
tin
descriptions of the design strategy:
(a) Enhancement, strengthening and reflection of cultural identity and traditions
c
ra
(b) Harmonization with cultural values of the region
The compliance range will be defined by an Expert Heritage Panel assigned by the
Certification Authority nt
co
2 RAILWAYS: This criteria applies to both underground and overground stations
&
6.3.5 Score
Table 4: Recomended Minimum Score for QCS Building Typologies
ng
END OF PART
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 1
Part 07: Management & Operations
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 2
Part 07: Management & Operations
7.1 GENERAL
7.1.1 Scope
1 The Management and Operations Category consists of factors associated with building
design management and operations
(a) Impacts: Environmental impacts resulting from ineffective building management and
operations include:
g
tin
(iii) Water Depletion
(iv) Materials Depletion
c
ra
(v) Land use and Contamination
(vi) Water Pollution
(vii) Air Pollution nt
co
(viii) Human Comfort & Health
&
(ii) Providing facilities for the collection ,storage ,and proper removal of organic
di
waste
(iii) Providing facilities for the collection ,storage ,and proper removal of recyclables
tra
(vii) Managing hospitality resources to reduce waste and support sustainable food
al
sources
(viii) Promote and educate users about the sustainable initiatives of the building
(ix) Providing a beneficial legacy to the community
7.1.2 Reference
7.2.1 Scope
1 Recycling Management shall be measured for the following categories of the buildings:
Table1: Building Typology
Commercial
Governmental
Education
Light Industry
Health Centers
g
Sports
tin
Railways
c
7.2.2 Description
ra
1 The Project shall encourage space planning to designate containment facilities for the
nt
building’s recyclable waste streams in order to minimize waste taken to landfills or
co
incineration facilities.
1 The Project shall develop and implement a Recycling Mangement Plan for the collection,
ng
2 The Engineer shall demonstrate that a central sorting and storage area is located close to a
truck loading area, and that sufficient storage has been provided for the recyclable material
tra
produced. The sorting and storage area must be properly isolated and ventilated to reduce
negative health impacts for users and visitors on the site. Outline the collection procedures
a
for recyclable materials in the project to demonstrate that recyclable materials will be easily
ar
collected and sorted. The Engineer shall also demonstrate how recyclable materials will be
handled at an off-site facility.
-s
7.2.4 Score
al
End of Part
QCS 2014 Section 07: Green Constructions Page 1
Part 08: Materials
g
c tin
ra
nt
co
&
ng
di
tra
a
ar
-s
al
QCS 2014 Section 07: Green Constructions Page 2
Part 08: Materials
8 MATERIALS [M]
8.1 GENERAL
8.1.1 Scope
1 The Material category consists of factors associated with material extraction, processing,
manufacturing, distribution, use/reuse, and disposal.
(a) Impacts: Environmental impacts resulting from material use and unsustainable
practices include:
(i) Material depletion
(ii) Climate Change
g
tin
(iii) Fossil Fuel Depletion
(iv) Air Pollution
c
ra
(b) Mitigate Impact: Factors that could mitigate environmental impact due to material use
include:
(i) nt
Using local Materials to reduce transportation needs
co
(ii) Using responsibly sourced materials
(iii) Using materials with high recycled contents
&
8.1.2 Reference
Global Sustainability Assessment System (GSAS) - V2.1 2013, Gulf Organization for
Research and Development, Qatar (Note: QCS reference shall be limited only to this
-s
8.2.1 Scope
1 The Regional Materials shall be measured for the following categories of the buildings
Table 1: Building Typology
Commercial
Governmental
Education
Mosques
Light Industry
Health Centres
Sports
Railways
QCS 2014 Section 07: Green Constructions Page 3
Part 08: Materials
8.2.2 Description
1 Encourage the use of regionally manufactured and assembled building elements and
materials in order to reduce the carbon footprint of the materials
1 All projects shall use materials that are regionally manufactured and assembled
8.2.4 Measurement
1 All projects shall complete the Regional Materials Calculator to compute a Performance
Indicator based on the weight and sourcing distance of all applicable materials. Materials
sourcing distance can either be regional (less than or equal to 200 kilometres) or external
g
(over 200 kilometres). All projects will only consider materials permanently installed in the
tin
project. Exclude mechanical, electrical, and plumbing assemblies, as well as specialty items
and equipment.
c
ra
8.2.5 Score
nt
Table 2: Recommended minimum Score for QCS’s Building Typologies
co
Performance Indicator (X) 20 ≤ X 30
&
END OF PART
ng
di
tra
a
ar
-s
al