Professional Documents
Culture Documents
Ia Smawnci SHS Q1 Las5 Final
Ia Smawnci SHS Q1 Las5 Final
TVL – IA
(Shielded Metal Arc Welding NC I)
Activity Sheet Quarter 1 – LO 5
Republic Act 8293, section 176 states that: No copyright shall subsist in any work
of the Government of the Philippines. However, prior approval of the government agency or
office wherein the work is created shall be necessary for exploitation of such work for profit.
Such agency or office may, among other things, impose as a condition the payment of
royalties.
ii
Introductory Message
The TVL– IA (Shielded Metal Arc Welding NC I) Activity Sheet will help
you facilitate the teaching-learning activities specified in each Most Essential
Learning Competency (MELC) with minimal or no face-to-face encounter between
you and the learner. This will be made available to the learners with the
references/links to ease the independent learning.
iii
Quarter 1 - Week 7
Learning Activity Sheets (LAS) No. 5
The general work clothing is worn by each person working in the shop. All these
clothing’s may not have frayed edges or holes. In addition to the clothing, extra
protection is needed for each person who is in direct contact with the materials. Tongs
and pliers are used in picking-up hot metals.
Additional extra protection aside from general clothing are: leather jacket, apron,
welding gloves, welding shield, face shield, safety gloves, welding cap, safety boots,
1
respirators, and full leather sleeves. Full clothing protection will practically protect the
whole body of the welder.
For your safety, it is proper to know the uses of your protective gadgets while
working with metals.
• Safety is a reminder to anticipate the precaution possible risk and danger in
every welding job.
• Safety glass protects the eyes from weld sparks and always worn by worker in
the shop.
• Welding shield covers the face and allow welder to see legibly on weldment
while performing welding.
• Face shield is a transparent hard plastic covering the eye while clearing and
grinding.
• Welding cap worn by welder as an additional safety for head and hair.
• Respirator is an equipment that prevent us from fumes and odor from industrial
waste.
• Leather apron a front body protection device while welding.
• Leather jacket worn by welder during welding difficult position.
• General clothing the usual personal clothing of a welder such as over-all,
welding apron or welding jackets
• Safety Gloves worn by welders to protect the hands in heat and burns.
• Welding Goggles protective glasses set in a flexible frame that fit snugly
against the face.
• Welding shoes is made of chrome leather and protects our feet from
spattering.
Aaron A. Adesas, et. al., Shielded Metal Arc Welding (SMAW) NC-1 - Senior High
School, Alternative Delivery Mode, Module 1: Preparing Weld Materials,
Department of Education, 2020, 43-45.
2
IV. Activity Proper
Activity 1
Direction: Explain each question. Write your answer on the space provided.
2. What are the things in consideration before performing the activities in a fabrication
area?
____________________________________________________________________
____________________________________________________________________
V. Reflection
Activity 1
Answers may vary.