Professional Documents
Culture Documents
Feb.2023.HQ - rielloUPSME2022.Configuration
Feb.2023.HQ - rielloUPSME2022.Configuration
VSD ER - Long back-up version - no internal batteries / 8A charger (compatible with battery capacity above 40Ah only)
VSD 2200 ER BVSD2K2LNB 2200 1760 0 450(19")x625x87(2U) 15.5
VSD 2200 ER + BB SEP 72V B1 2200 1760 80 115.5
on 1000 VA - 700 W load
VSD 2200 ER + BB SEP 72V B1 220 115.5
on 1500 VA - 1000 W load
VSD 2200 ER + BB SEP 72V B1 125 115.5
VSD 3000 ER BVSD3K0LNB 3000 2400 0 450(19")x625x87(2U) 16.5
VSD 3000 ER + 2x BB SDH 72V M1 3000 2700 32 107.5
VSD 3000 ER + BB SDH 72V B1 3000 2400 55 116.5
VSD 3000 ER + 2x BB SEP 72V B1 3000 2400 130 216.5
Note: Back-up time is calculated at 0.7 power factor
Coating treatment on all PCBs eighth ="V" 1000/3000 UPS cards coating treatment for all models
SDU 5000/6000 with 4+4 sockets IEC 10A + 2 sockets IEC 16 A + 4 thermal protection (instead of term.board + 2 x IEC 10A)
SDU 5000 A7 PDIST CSDU5K0AA7U0RUA 5000 5000 8 448(19")x640x131(3U) 46
SDU 6000 A7 PDIST CSDU6K0AA7U0RUA 6000 6000 5 448(19")x640x131(3U) 47
Tower/rackmount
BB SDU 96V A5 KSDU096PA500NPA 4000 8 x 9Ah 448(19")x640x131(3U) 34
BB SDU 96V M1 KSDU096PM100NPA 4000 2 x 8 x 7Ah 448(19")x640x131(3U) 46
BB SDU 96V M4 KSDU096PM400NPA 4000 2 x 8 x 9Ah 448(19")x640x131(3U) 54
BB SDU 180V A3 KSDU180PA300NPA 5000/6000 15 x 7Ah 448(19")x640x131(3U) 30
BB SDU 240V A3 KSDU240PA300NPA 8000/10000 20 x 7Ah 448(19")x640x131(3U) 50
Tower/rackmount with Hot swap battery
BB SDU 240V A3 HS KSDU240PA3HSNPA 8,000 20 x 7Ah 448(19")x640x131(3U) 51
BB SDU 240V A5 HS KSDU240PA5HSNPA 10,000 20 x 9Ah 448(19")x640x131(3U) 61
Tower
BB 1320 180V B1 K132180PB12F SDU 6000 ER 15 x 40Ah 400x825x1320 293
BB 1320 240V B1 K132240PB12F SDU 10000 ER 20 x 40Ah 400x825x1320 360
Coating treatment on all PCBs fifth to last ="DV" 5000/10000 UPS cards coating treatment for all models
Isolation transformers
MODEL Code Suitable for Size Weight
W x D x H mm kg
TBX SEP 1500 M TSEP1K5M0000N SEP 700/1000/1500 158x434x231 22
TBX SEP 3000 M TSEP3K0M0000N SEP 2200/3000 160x460x340 26
TBX SPW 6000 M TSPW6K0M0000N STW 5000/6000 400x265x500 60
Multi Pass
MODEL Code Suitable for Size Weight
W x D x H mm kg
MP 10A YBYM10AA 10A load (boxed) 158x237x65 2
MP 16A YBYM16AA 16A load (boxed) 158x237x65 2
MPR 16A YBYR16AA 16A load (rackmount) 483x200x45 4.8
The above indicated extended back-up configurations are only indicative of the many possible configurations. Please contact us for any different
need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries installed by
Riello UPS at the factory. The capacity declared is referred over a 20-hour discharge period.
Management and shutdown software suitable for Windows-Linux-MacOSx (Unix on Full Version)
Price includes one licence for one installation
PowerShield3 f.v. licence LICENZA F.V. Full version licence, download from www.riello-ups.com
Software for central management of up to 990 UPSs through Ethernet / SNMP protocol
PowerNetGuard 0SWU00401 Download from www.riello-ups.com - Licence for the 1st year incl.
PowerNetGuard Licence ext. LICENZA PNG Licence extension for one year
Serial port duplexers (provide an additional RS 232 port with modem management)
MULTICOM 352 YSKCMC4A Slot-in card
Extension cards
MULTICOM 372 YSKCMC6A provides an additional RS 232 + ESD port
MULTICOM 384 YSKCC00A provides 230V relay contacts + ESD port
MODEM
GSM MODEM YMODGSMA Allows sending SMS in conjunction with the Netman 204
BATTERY CABINETS
Cabinets complete with batteries
MODEL Code Battery Size Weight
BB 1320 480V T2 K132480PT23FNPA 3 x 40 x 7 Ah (up to 40 kVA) 400x825x1320 390
BB 1320 480V T5 K132480PT53FNPA 3 x 40 x 9 Ah (up to 60 kVA) 400x825x1320 400
BB 1600 480V S5 K160480PS53TNPA 40 x 40 Ah (up to 80 kVA) 650x750x1600 660
BB 1900 480V V6 K190480PV63TNPA 40 x 65 Ah (from 15 to 120 kVA) 860x800x1900 1075
BB 1900 480V V7 K190480PV73TNPA 40 x 80 Ah (from 15 to 120 kVA) 860x800x1900 1320
BB 1900 480V V8 K190480PV83TNPA 40 x 100 Ah (from 15 to 200 kVA) 860x800x1900 1475
BB 1900 480V V9 K190480PV93TNPA 40 x 112 Ah (from 15 to 200 kVA) 860x800x1900 1515
BBX 190 FUSE 160A NH1 YBBXE10A 3x 160 A fuses, for 65 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 200A NH1 YBBXE11A 3x 200 A fuses, for 80 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 250A NH1 YBBXE12A 3x 250 A fuses, for 100/120 Ah battery (60 kVA to 200 kVA)
The above indicated extended back-up configurations are only indicative of the many possible configurations. Please contact us for any
different need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries installed
by Riello UPS at the factory. The capacity declared is referred over a 20-hour discharge period.
SRT/SRM accessories
MODEL Code Details
S3T PARALLEL KIT YS3TP00A Parallel retrofit kit with closed loop facility
MULTICOM 392 YSKCMC9A 3 input 8 programmable output (max 25 Volt, 1 Amp)
Battery management card (slot version) to be used for Li-Ion battery and/or
EnergyManager YSKCC02C dynamic peak shaving function. Subject to confirmation of the application by our
pre-sales Technical Service.
S3T SYNCHRO YS3TE08A Kit for inverter synchronization from different source than input by-pass
S3T TEMP SENSOR KIT YS3TE09A Temperature sensor kit for external battery cabinet
Top Cable Entry MST 160-200 YMSTTE1A On-site installation cabinet, to arrange cable top entry on right side
(Interconnection cables between UPS and TCE not included)
Kit cable for TCE cabinet YMSTKC3A On-site interconnection cable kit between UPS and TCE (MST 160-200)
Kit eyebolts MST 160-200 YMSTEB1A On-site installation kit, to lift and facilitate UPS placement
Kits marked with *** are not for user installation (trained service engineers only)
BATTERY CABINETS
Cabinets complete with batteries
MODEL Code Battery Size Weight
BB 1320 480V T4 K132480PT43FNPA 2 x 40 x 9 Ah (up to 40 kVA) 400x825x1320 300
BB 1320 480V T2 K132480PT23FNPA 3 x 40 x 7 Ah (up to 40 kVA) 400x825x1320 390
BB 1320 480V T5 K132480PT53FNPA 3 x 40 x 9 Ah (up to 60 kVA) 400x825x1320 400
BB 1600 480V S5 K160480PS53TNPA 40 x 40 Ah (up to 80 kVA) 650x750x1600 660
BB 1900 480V V6 K190480PV63TNPA 40 x 65 Ah (up to 120 kVA) 860x800x1900 1070
BB 1900 480V V7 K190480PV73TNPA 40 x 80 Ah (up to 120 kVA) 860x800x1900 1255
BB 1900 480V V8 K190480PV83TNPA 40 x 100 Ah (up to 200 kVA) 860x800x1900 1415
BB 1900 480V V9 K190480PV93TNPA 40 x 112 Ah (up to 200 kVA) 860x800x1900 1550
Battery SWC 400 A 3P YSEZE14A Switch for max 6 battery cabinets in // 400x800x1900 150
(MST 100-125)
Battery SWC 800 A 3P YSEZE19A Switch for max 6 battery cabinets in // 400x800x1900 150
(MST 160-200)
BBX 190 FUSE 160A NH1 YBBXE10A 3x 160 A fuses, for 65 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 200A NH1 YBBXE11A 3x 200 A fuses, for 80 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 250A NH1 YBBXE12A 3x 250 A fuses, for 100/120 Ah battery (60 kVA to 200 kVA)
The above indicated extended back-up configurations are only indicative of the many possible configurations. Please contact us for any
different need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries installed
by Riello UPS at the factory. The capacity declared is referred over a 20-hour discharge period.
up to 5x MPX 15 PM or 5x MPX 25 PM
MPX 130 PWC BCT GMPXM13UNBCTRUA (including by-pass module, backfeed 600 x 1050 x 1200 145
bypass contactor and connectivity panel)
up to 5x MPX 15 PM or 5x MPX 25 PM
(including by-pass module, backfeed BP
MPX 130 PWC CPL GMPXM13UNBCPRUA contactor, redundant second PSU, ready 600 x 1050 x 1200 145
for parallel configuration, conn. panel and
air filter on front door)
up to 7x MPW 25 PM or 7x MPW 42 PM
MPW 300 PWC GMPWM30UNB00R1A (including by-pass module and 600 x 1050 x 2002 300
connectivity panel)
Extra price for cold start operation -all
cabinet models
Cold Start option CST fifth to last = "CS" To enable this feature, the PM must be 600 x 1050 x 2002 300
"CST" version (see "Multi Power Power
Modules" above)
Extra price for replaceable air filter and
Air filter on front door fifth to last = "AF" gasket around the edge on front door - all
models
Extra price for IP 31 protection on all
MPW/MPX cabinets 2002 mm height in
IP 31 Protection H2000 fifth to last = "31" single and parallel configuration (It
includes MPX AFD kit) - not applicable for
MPW 500 SWC
Coating treatment Coating treatment for all cards on any
fifth to last ="DV" Power/Combo cabinet type (MPW/MPX)
on all PCBs in cabinet
up to 3x MPX 15 PM or 3x MPX 25 PM +
3 batt. Shelves (including by-pass
MPX 75 CBC GMPXK75ZA000RUA 600 x 1025 x 1600 190
module, and connectivity panel)
NB: no monitoring of Battery Unit status
up to 3x MPX 15 PM or 3x MPX 25 PM +
3 batt. shelves (as MPX 75 CBC, plus
MPX 75 CBC BCT GMPXK75ZA0CTRUA 600 x 1025 x 1600 195
backfeed bypass contactor)
NB: no monitoring of Battery Unit status
up to 3x MPX 15 PM or 3x MPX 25 PM +
3 batt. Shelves (including by-pass
module, backfeed BP contactor,
MPX 75 CBC CPL GMPXK75ZA0CPRUA redundant second PSU, ready for parallel 600 x 1025 x 1600 200
configuration, conn. panel and air filter on
front door)
NB: no monitoring of Battery Unit status
up to 4x MPX 15 PM or 4x MPX 25 PM +
6 batt. Shelves (including by-pass
MPX 100 CBC GMPXM10ZA000RUA 600 x 1050 x 2002 350
module, battery switch and connectivity
panel)
up to 4x MPX 15 PM or 4x MPX 25 PM +
6 batt. shelves
MPX 100 CBC BCT GMPXM10ZA0CTRUA 600 x 1050 x 2002 350
(as MPX 100 CBC, including backfeed
bypass contactor)
up to 3x MPW 42 PM + 5 batt. shelves
MPW 130 CBC GMPWM13ZA000R1A (including by-pass module, battery switch 600 x 1050 x 2002 340
and connectivity panel)
Extra price for cold start operation -all
cabinet models
Cold Start option CST fifth to last = "CS" To enable this feature, the PM must be
"CST" version (see "Multi Power Power
Modules" above)
Extra price for replaceable air filter and
Air filter on front door fifth to last = "AF" gasket around the edge on front door - all
cabinet models
Extra price for IP 31 protection on all
MPW/MPX cabinets 2002 mm height in
IP 31 Protection H2000 fifth to last = "31" single and parallel configuration -
includes MPX AFD kit - not applicable for
MPW 500 SWC
Coating treatment Coating treatment for all cards on any
fifth to last ="DV" Power/Combo cabinet type (MPW/MPX)
on all PCBs in cabinet
The above indicated extended back-up configurations are only indicative of the many possible configurations. Please contact us for any
different need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries
installed by Riello UPS at the factory. The capacity declared is referred over a 20-hour discharge period.
NXE 300 SB IP31 FNXEM30QNB31RUA 300/270 0 480 - 1370 x 1060 x 2210 920
NXE 400 SB IP31 FNXEM40QNB31RUA 400/360 0 480 - 1570 x 1060 x 2210 1160
NXE 500 SB IP31 FNXEM50QNB31RUA 500/450 0 480 - 1670 x 1060 x 2210 1380
NXE 600 SB IP31 FNXEM60QNB31RUA 600/540 0 480 - 2170 x 1060 x 2210 1700
BBX 190 FUSE 160A NH1 YBBXE10A 3x 160 A fuses, for 65 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 200A NH1 YBBXE11A 3x 200 A fuses, for 80 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 250A NH1 YBBXE12A 3x 250 A fuses, for 100/120 Ah battery (60 kVA to 200 kVA)
The above indicated extended back-up configurations are only indicative of the many possible configurations. Please contact us for any
different need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries
installed by Riello UPS at the factory. The capacity declared is referred over a 20-hour discharge period.
BBX 190 FUSE 200A NH1 YBBXE11A 3x 200 A fuses, for 80 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 250A NH1 YBBXE12A 3x 250 A fuses, for 100/120 Ah battery (60 kVA to 200 kVA)
MHT 200 NBP EMHUM20NNB00 200/180 0 480 - 1000 x 850 x 1900 700
MHT 250 NBP FMHUM25NNB00 250/225 0 480 - 1000 x 850 x 1900 750
MHT 300 NBP FMHUM30NNB00 300/270 0 480 - 1500 x 1000 x 1900 1430
MHT 400 NBP FMHUM40NNB00 400/360 0 480 - 1500 x 1000 x 1900 1650
MHT 500 NBP FMHUM50NNB00 500/450 0 480 - 2100 x 1000 x 1900 2100
MHT 600 NBP FMHUM60NNB00 600/540 0 480 - 2100 x 1000 x 1900 2400
MHE 200 NBP EMHEM20NNB00 200/200 0 480 - 1000 x 850 x 1900 1100
MHE 250 NBP FMHEM25NNB00 250/250 0 480 - 1000 x 850 x 1900 1300
MHE 300 NBP FMHEM30NNB00 300/300 0 480 - 1500 x 1000 x 1900 1520
MHE 400 NBP FMHEM40NNB00 400/400 0 480 - 1500 x 1000 x 1900 1670
MHE 500 NBP FMHEM50NNB00 500/500 0 480 - 2100 x 1000 x 1900 2500
MHE 600 NBP FMHEM60NNB00 600/600 0 480 - 2100 x 1000 x 1900 2830
MHE 800 NBP FMHEM80NNB00 800/800 0 480 - 3200 x 1000 x 1900 3950
MSB 800 SW MHE PMSBM802HE00 800 YES bottom 1000 x 1000 x 1900 570
MSB 1200 MHE PMSBT123HE00 1200 NO top/bottom 1400 x 1000 x 1900 800
MSB 1200 SW MHE PMSBT122HE00 1200 YES top/bottom 1800 x 1000 x 1900 1000
MSB 1600 MHE PMSBT163HE00 1600 NO top/bottom 2200 x 1000 x 1900 1100
MSB 1600 SW MHE PMSBT162HE00 1600 YES top/bottom 3000 x 1000 x 1900 1610
MSB 2000 MHE PMSBT203HE00 2000 NO top/bottom 2200 x 1000 x 1900 1200
MSB 3000 MHE PMSBT303HE00 3000 NO top/bottom 3600 x 1000 x 1900 2000
NB - "SW" models include input/output switches and manual by-pass
PRICE LIST Middle East - Africa 2023 1.0
Back
Power Battery Size Weight
MODEL Code up**
kVA/kW min Voltage Ah W x D x H mm kg
MHT 100 DCF EMHTM10ANBG0 100/90 0 480 - 800 x 850 x 1900 760
MHT 120 DCF EMHTM12ANBG0 120/108 0 480 - 800 x 850 x 1900 815
MHT 160 DCF EMHTM16ANBG0 160/144 0 480 - 1000 x 850 x 1900 950
MHT 200 DCF EMHTM20ANBG0 200/180 0 480 - 1000 x 850 x 1900 1085
MHT 250 DCF FMHTM25ANBG0 250/225 0 480 - 1000 x 850 x 1900 1180
MHE 100 DCF EMHEM10ANBG0 100/100 0 480 - 800 x 850 x 1900 910
MHE 120 DCF EMHEM12ANBG0 120/120 0 480 - 800 x 850 x 1900 910
MHE 160 DCF EMHEM16ANBG0 160/160 0 480 - 1000 x 850 x 1900 1130
MHE 200 DCF EMHEM20ANBG0 200/200 0 480 - 1000 x 850 x 1900 1185
MHE 250 DCF FMHEM25ANBG0 250/250 0 480 - 1000 x 850 x 1900 1420
DC Filter 300 YSPEG01B MHT / MHE 300 400 x 850 x 1900 280
DC Filter 400 YSPEG02B MHT / MHE 400 400 x 850 x 1900 280
DC Filter 500 YSPEG03B MHT / MHE 500 400 x 850 x 1900 300
DC Filter 600 YSPEG04B MHT / MHE 600 650 x 1000 x 1900 420
DC Filter 800 YSPEG05B MHT / MHE 800 650 x 1000 x 1900 480
Note: suitable also for parallel configurations with separated or common batteries
MHT 100 PWA EMHTM10ANBS0RUA 100/90 150 kW - 15 kW 480 1200 x 850 x 1900 880
MHT 120 PWA EMHTM12ANBS0RUA 120/108 150 kW - 15 kW 480 1200 x 850 x 1900 935
MHT 160 PWA EMHTM16ANBS0RUA 160/144 150 kW - 15 kW 480 1400 x 850 x 1900 1010
MHT 200 PWA EMHTM20ANBS0RUA 200/180 150 kW - 15 kW 480 1400 x 850 x 1900 1145
MHT 250 PWA FMHTM25ANBS0RUA 250/225 150 kW - 15 kW 480 1400 x 850 x 1900 1240
MHT 300 PWA FMHTM30ANBS0RUA 300/270 150 kW - 15 kW 480 1900 x 1000 x 1900 1700
MHT 400 PWA FMHTM40ANBS0RUA 400/360 150 kW - 15 kW 480 1900 x 1000 x 1900 1920
PRICE LIST Middle East - Africa 2023 1.0
BBX 190 FUSE 160A NH1 YBBXE10A 3x 160 A fuses, for 65 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 200A NH1 YBBXE11A 3x 200 A fuses, for 80 Ah battery (60 kVA to 200 kVA)
BBX 190 FUSE 250A NH1 YBBXE12A 3x 250 A fuses, for 100/120 Ah battery (60 kVA to 200 kVA)
The above indicated extended back-up configurations are only indicative of the many possible configurations. Please contact us for any different
need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries installed by
Riello UPS at the factory. The capacity declared is referred over a 20-hour discharge period.
PRICE LIST Middle East - Africa 2023 1.0
MPT BATT TEMP Temperature sensor kit to be installed in the battery cabinet (supplied
YMPTTEMA
SENSOR KIT by Riello or by others) or in the battery room. Cable length 25 mt
NB - The same transformers can be used on the rectifier input, when galvanic isolation between input line
and battery is requested. In such cases the nearest upper size shall be selected (example: for a 100 kVA,
the TBX 120 T model shall be used)
BY-PASS 400 A YMBBM40A 2 switches 400A, max load 250 kVA 650 x 800 x 1900 200
BY-PASS 800 A YMBBM80A 2 switches 800A, max load 500 kVA 800 x 800 x 1900 250
All the battery configurations in this section include "Long Life" batteries, which are compulsory in order to comply with the standard EN
50171
(If compliance is not required, standard batteries can be used).
The above indicated extended back-up configurations are only indicative of the many possible. Please contact us for any different need.
Back-up times depend on the brand and characteristics of the batteries. The values included in the list are referred to the batteries installed by Riello
UPS at the factory. The capacity declared is referred over a 20-hour discharge period.