Professional Documents
Culture Documents
Confirmation of compliance
The following tests have been confirmed to have been completed in accordance with the respective standard during
testing on the above mentioned equipment:
Primary tests ( completed on all equipment relative to rating) IEC Standard ref.
Power Frequency test on auxiliary wiring circuits 1kV (1s) Passed 62271-1 (7.2.4)
Power Frequency test on auxiliary wiring circuits 2kV (1min) Passed 62271- 1 (6.10.6)*
Verification of correct wiring ( including protection) Passed 62271-200 (7.5)
Visual inspection checks Passed 62271-200 (7.5)
Mechanical operation checks (including intelocks, earthing points & switch / breaker
Passed 62271-200 (7.102)
operation)
62271-200 (7.2)
Auxiliary Electrical device checks Passed
62271-200 (7.104)
Gas Tightness tests Passed 62271-200 (7.4)
(*) Reference from type test IEC standard (No routine test)
p. SEL S.p.A.
Test responsibles: Alessio Fedi
SEL S.p.A.
Via Amendola - 51035 LAMPORECCHIO (PT)
Tel. +39 0573 80051
Fax +39 0573 803110
www.sel-electric.com e-mail: info@sel-electric.com
Partita IVA 0106933 047 8 - C.C.I.A. Pistoia 116356
Reg. Soc. Pistoia 11677
Conformity Declaration
(in according with ISO/IEC 17050-1)
Ring Main Unit
SEL S.p.A., situated in Amendola St., Lamporecchio (PT), Italy, declares under its exclusive responsibility that
the following equipment:
is built in conformity with the standard IEC62271-200 "A.C. metal-enclosed switchgear and controlgear for
rated voltages above 1 kV and up to and including 52 kV".
SEL declines
every responsibility for people accidents deriving from tampering made to the equipment or from lacks of
installation and maintenance.
p. SEL S.p.A.
Technical Manager: Leonardo Leporatti