Professional Documents
Culture Documents
Active - Passive 3
Active - Passive 3
7) check the pressure and the tire wear level on each tire
10) press the brake to see if the brake and break light work
11) press the gas paddle to know if the engine is on
10) the brake is pressed to see if the brake and break light work
11) the gas paddle is pressed to know if the engine is in operation
firstly, the knob is pulled to open the car hood. next, the liquid of the cooling system is checked .
After that, the car battery and the engine oil is inspected of its condition. after finishing all that,
the hood is closed and then the wiper is examined for any damage. The pressure and the tire
wear level on each tire is checked and after that, emergency equipment is ensured of its
adequate and functional. After finishing inspecting the outer part of the car, the interior is
surveyed. The brake is pressed to see if the brake and break light work while the gas paddle is
pressed to know if the engine is in operation. Lastly, the seat belt is put on before
going on the road.