Sl.no Description Unit Quantity Rate Amount Remarks
DAR 2021 Arriving cost for Aluminium partition Detail cost working for 4.3mx1.76m=7.568 sqm
Providing and fixing 12 mm thick prelaminated particle board flat pressed
three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per 12 mm thick particle 21.2 architectural drawings and directions of engineer-in-charge. board considered. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other 21.2.1 side sqm 5.848 846.21 4948.64 1.36x4.3m=5.848 sqm Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in 21.3 basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 21.3.2 kg/sqm) sqm 1.72 1162.25 1999.07 0.4x4.3=1.72 sqm Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel Aluminium Rectangular screws, all complete as per architectural drawings and the directions Tube section of Engineer-in-charge. (Glazing, 63mmx38mmx2.10mm = 21.1 paneling and dash fasteners to be paid for separately) : 1.093 kg/m Sections( 1.76*5=8.8m Anodised aluminium (anodised transparent or dyed to required shade +4.3*4=17.2m) Total 26 according to IS: 1868, Minimum Rm =26x1.093 21.1.1.1 anodic coating of grade AC 15) for fixed portion kg 28.418 380.49 10812.76 kg/m=28.418 Cost for 7.568 sqm sqm 17760.4709 Cost per sqm(Excluding GST , incl.15% CPOH,Water charges 1%,Labour cess 1%) sqm 2346.785267 Chennai cost index 19.04% 446.8279148 Final Cost(per sqm) sqm 2793.613182