Professional Documents
Culture Documents
Elite 3
Elite 3
that the new configurations are not activated in the meter yet.
Move selection bar to ‘CHNG unt’, press to access the next page for
configuring unit of energy and power.
This display shows the factory default unit set for energy. The default unit
is set according to CT-PT commissioning.
If the default unit is ‘kWh’, the user can make it either ‘MWh’ or ‘Wh’,
respectively. As MWh is one higher unit to kWh and Wh is one lower unit
to kWh. For example, 719kW will be shown as either 719000W or
0.719MW.
To save the changes, move the selection arrow on ‘SAVE’ and then press
.
The message ‘SAVE done’ will appear for some seconds if the unit
change is successful.
To return to the previous page, press .
To return back to the first page of Setup Menu, move the selection arrow
on ‘Quit’ and then press .
This display shows the factory default unit set for power. The default unit
is set according to CT-PT commissioning.
If the default unit is ‘kW’, the user can make it either ‘MW’ or ‘W’,
respectively. As MW is one higher unit to kW and W is one lower unit to
kWh. For example, 719kW will be shown as either 719000W or 0.719MW.
To save the changes, move the selection arrow on ‘SAVE’ and then
press .
The message ‘SAVE done’ will appear for some seconds if the unit
change is successful.
To return to the previous page, press .
6 Meter Displays