Professional Documents
Culture Documents
Trainee Information
1. Name: *
SURESHRAJ P
2. Vendor/ Employer : *
VENDOR
Remove the breaker trolley from panel and then install the panels.
All above.
1mm within 1meter measured length & 2mm over entire switchboard length.
5. For Panel installation when should be the withdrawable part (VCB / Contactor / PT trollies)
removed? (1 Point)
7. Which of the following torque values are correct for tightening of Busbar & any Insert
(Bushing / CT)? (1 Point)
Tightening torques 40Nm for M10 bolt & 70Nm for M12 bolt
Tightening torques 30Nm for M10 bolt & 50Nm for M12 bolt
8. Is there any interlock provided to avoid opening of HV door when the withdrawable part (VCB
/ Contactor / PT trollies) is in service condition ? (1 Point)
9. Can the cable earthing switch be switched ON with VCB in service position ? (1 Point)
Yes, earthing switch can be operated hassle free in all conditions irrespective of VCB position
No, earthing switches can be operated only when VCB is in test condition
10. Which lubricant should be used for earthing switch blades & tulip contacts on switching
device? (1 Point)
11. During Maintenance all insulating components must be clean with? (1 Point)
Vacuum cleaner
Clean cloth
12. Where are panel rating plate & CT/VT rating plate stickers stuck on panel ? (1 Point)
Outside of HV door
Inside of HV door
Inside of LV door
14. When can we provide Padlock facility for shutter mechanism in panels ? (1 Point)
Object more then 1mm should not enter and touch the live parts
Object more then 2.5mm should not enter and touch the live parts
Object more then 50mm should not enter and touch the live parts
Object more then 12.5mm should not enter and touch the live parts
18. Circuit Breaker is rated for ------- mechanical operations at rated current? (1 Point)
100000 operations
10000 operations
2000 operations
5000 operations
19. Shrouding of main bus bar joints for NXAIR H (36kV) ? (1 Point)
Is provided by default
20. Shrouding of main bus bar joints for NXAIR (12kV) ? (1 Point)
Is provided by default
22. Limits of Circuit Breaker closing and opening timings are …..? (1 Point)
IP 2x
IP 4x
IP 3x
IP 55
24. Panel to panel coupling bolts for NXAIR (12kV) provided at ................. ? (1 Point)
All above
25. Which size of Allen key to be use for NXAIR (12kV) door defeat interlock .......? (1 Point)
M6
M4
M5
M3
This content is created by the owner of the form. The data you submit will be sent to the form owner. Microsoft is not responsible for
the privacy or security practices of its customers, including those of this form owner. Never give out your password.