Professional Documents
Culture Documents
This document describes how to install an OmniPCX Office Cloud module in a 19” rack and the connections to
establish before a remote administrator can start its configuration.
The Alcatel-Lucent OpenTouch Office Cloud Modules are delivered with a 19 inches rack mounting kit.
When installed with the rack mounting kit, a total of 3U are used.
The OpenTouch Office Cloud Module –low traffic The OpenTouch Office Cloud Module –High traffic
Each OpenTouch Office Cloud module comes with a QR-Code containing the list
of Mac addresses and serial numbers of the powerCPUs.
Power Consumption
ONE Power supply cord (not provided because depends on local power station/UPS)
5 OR 6 Ethernet cables
LAN Connection
Power Connection
When plugging the power supply, default state should be: Height=110mm
[2.5U ] Weight=11Kg
Length=442mm
Note that for completing the start of the CPUs, they must receive a valid IP address from a DHCP/BOOTP
server. Only after this IP address allocation, the CPU can be remotely managed by the administrator. During
this installation process, make sure to respect all security and technical requirements described in the
OmniPCX Office RCE installation manual available on Alcatel-Lucent Enterprise Portal.