You are on page 1of 3

Home » Aneh Unik Misteri , Schematic Notebook » Blink Code Compaq CQ40 Intel

Blink Code Compaq CQ40 Intel

Troubleshooting Compaq CQ40 Intel with Blink Code.


Blink 1x = Check vcore, if less than 1.05v. Reflow pict No.1 or replace isl6265
Blink 2x = Flash Ic Bios pict. No. 4
Blink 3x = Replace DDR if not solving, Reflow pict No.2
Blink 5x = Reflow or Reball pict No. 3
Blink 6x = Replace Ic Bios Pict No. 4

Email ThisBlogThis!Share to TwitterShare to Facebook

Read more: http://aspal-putih.blogspot.com/2011/10/blink-code-compaq-cq40-


intel.html#ixzz1tJgmB61w
Under Creative Commons License: Attribution
AC power Constantly Power OK. Power is being None. The power adapter is likely not the
adapter LED on adapter supplied. problem.
Try a different power outlet.
AC power Constantly Power Power is not being
adapter LED off adapter supplied
Replace power adapter.
Try a different power outlet.
AC power Continuous Power
Insufficient power
adapter LED blinking adapter
Replace power adapter.
Caps Reseat replace CPU.
Lock/Num 1 CPU CPU not functional
Lock Service
Restore BIOS from onboard backup
Caps
BIOS corruption (jumpers)
Lock/Num 2 BIOS
failure
Lock
Service
Reseat memory modules (see next
section).
Caps
Memory module Test memory from UEFI or BIOS.
Lock/Num 3 Memory
error not functional
Lock
Replace bad memory modules.

Service
Caps
Graphics controller
Lock/Num 4 Graphics Service
not functional
Lock
Caps
System General system
Lock/Num 5 Service
board board failure
Lock
Restore BIOS from onboard backup
Caps BIOS
(jumpers)
Lock/Num 6 BIOS authentication
Lock failure
Service
Reseat memory modules (see next
section).

Service
Beep Varies Varies Varies
For more detail on the exact code, search
the Internet for "beep code" and the
manufacturer of your BIOS - such as AMI
or Award.

You might also like