Professional Documents
Culture Documents
First of all open the software then set Working directory and Create a New part file
utilizing the default templet and entre and enter the name of the Model “MUFF
COUPLING ”
Step No : 01 Once open the Proe Software, go to upper left corner and click the
sheet of paper to create a new document.
1. Click on Part then OK
2. In our design we are going to use MMNS-PART SOLID unit system, so in
order to do that; select options icons on the toolbar
3. Click on Document Properties tab.
4. In the left menu, select “Units”.
5. In the unit system bar, choose “MMNS-PART SOLID”.
6. Click OK
Step3
Select the front plane draw the rectangle of 8X98 and use extrude command and
save it
Step No : 5
To assembly the MUFF COUPLING, Create new file and set the Working
Directory. Then utilizing the default template and entre and enter the name of the
Model ASSEMBLY_OF_ MUFF COUPLING Select the Assembly option …
.. 1. Click on Part then OK
2. In our design we are going to use MMNS PART SOLID unit system, so in order
to do that; select options icons on the toolbar
3. Click on Document Properties tab.
4. In the left menu, select “Units”.
5. In the unit system bar, choose “MMNS_ASM_DESIGN”.
6. Click OK
First, we will place the bottom plate part in the assembly and assemble it at default
location