Professional Documents
Culture Documents
Oon On
On/off
Volume
HEARING AID
The medium-power amplifier section is built around
the popular audio amplifier integrated circuit TDA2822M.
This integrated circuit, IC2, specially designed for low-power
portable applications, is readily available in an 8-pin mini
DIP package. Here, the integrated circuit is wired to drive the
general monophonic 32-ohm headphone. The audio output
of this hearing aid circuit is 10 to 15 mW, and the idle current
consumption is less than 1 mA. The circuit can be easily
assembled on a mounting board. For convenient assembly
and maintenance, use two integrated circuit sockets, a 4-pin
DIP for LM358, and an 8-pin DIP for TDA2822M.
Upon opening the enclosure, ensure that you disconnect and set aside
the pre-existing speaker.
Use hot glue to secure the preamplifier, the power supply and the
microphone which is inside the enclosure.
Use a good quality mono earpiece.
LM385
TDA2822
8
Amplifier
TDA2822M
Power
supply 5V
Preamplifier
LM358