Professional Documents
Culture Documents
Chemical Thermodynamics
1.1.2 Surroundings:
The remaining part of the universe which should be in a position to exchangeenergy and
matter with the system is called as surroundings.
1. Closed System:
A system which can exchange energy but not matter with its surroundings iscalled as closed
system.
Ex: A substance kept in a closed vessel, but not insulated, will be able to exchangeenergy but not
matter with its surroundings.
2. Open system:
A system, which can exchange energy as well as matter with its surroundings issaid to be an
open system.
Ex: Water kept in an open beaker. The heat (energy) is absorbed from thesurroundings and the
water vapour (matter) will escape into the surroundings.
3. Isolated system
A system which can exchange neither energy nor matter with its surroundingsis called an
isolated system.
Ex: Hot water kept in a closed and insulated vessel. A substance kept in a perfectthermos flask
cannot exchange either energy or matter.
1.1.4 Properties of a system
The macroscopic or bulk properties of a system can be divided into two classes;
a) Intensive properties
b) Extensive properties
Intensive properties:
The properties which do not depend on the quantity of the substance presentin a system are
called intensive properties.
Example: temperature, pressure, density, viscosity, surface tension, refractive index,freezing point
etc.
Extensive properties:
The properties which depend on the amount of the substance present in a systemare called
extensive properties
Example: mass, volume, energy, internal energy, free energy, entropy, etc.
e.g., if the pressure and volume of the initial state of a system is P1and V1 and in the final state P2
ΔP &ΔV are state functions. Similarly ΔS, ΔG & ΔE are also state functions.
1.1.5.12 Path function
Path function is also known as path variable. Properties which depend on the pathfollowed to
bring about the change are called as path functions.
e.g., heat, work, etc.
1.2 - I Law of thermodynamics.
a) Energy can neither be created nor destroyed; but it can be converted from one form to another
form.
b) Energy of an isolated system remains constant.
c) It is impossible for any machine to produce work without consuming energy. This
law is a statement of the principle of conservation of energy.
Consider a system to which a heat energy ‘q’ is supplied. It is used in two ways.
One is to increase the internal energy and the other is to do some useful work.
∴ q = ∆𝐸 + w
∆𝐸 = 𝑞 − w
𝑞 = ℎe𝑎𝑡 𝑎𝑏𝑠o𝑟𝑏e𝑑
W =Work done by the system
A substance is associated with different types of energies such as vibration energy (𝐸𝑣),
rotational energy (𝐸𝑟), translation energy (𝐸𝑡), electronic energy (𝐸e) andnuclear energy (𝐸𝑛).
𝐸𝐼𝑛𝑡e𝑟𝑛𝑎𝑙 = 𝐸𝑣 + 𝐸𝑟 + 𝐸𝑡 + 𝐸e + 𝐸𝑛
1.2.3 Enthalpy
Enthalpy represents total energy stored in a system i.e., the sum of internalenergy and
pressure volume work of a system under a particular set of conditions.
Where ∆𝑛 = 𝑛2 − 𝑛1
a. I law is concerned only with the energy changes, but not the direction in whichenergy
changes take place
b. It does not tell about the feasibility of a reaction
c. It does not explain why the heat energy cannot be completely converted intowork.
The above statement leads to the need for the 2nd law of thermodynamics.
Ex: When a solid change into a liquid, there is an increase in entropy since thearrangement of
atoms and molecules is less ordered in liquid.
Entropy is a physical quantity. It is equal to the ratio of heat absorbed or rejected to the
temperature.
It indicates the direction of heat flow. A spontaneous process is also known as an irreversible
process because these processes take place at a very fast rate. All the natural processes are
spontaneous processes.
It helps in determining the thermodynamic state of an object. A little consideration will show
that when a spontaneous process takes place it moves from less probable state to a more probable
state.
Like temperature, pressure, volume, internal energy, magnetic behavior it expresses the state of
a body.
The orderliness of an object decreases with the increase of entropy. Hence spontaneous
processes are accompanied by an increase in entropy as well as an increase in the disorder of the
system.
Like temperature or pressure, it cannot be felt. Hence the state of the order of the molecules gets
disturbed and gives rise to greater disorder.
It is a measure of the disorder or randomness in the system. When a gas expands into a vacuum,
water flows out of a reservoir, spontaneous chain reaction takes place, an increase in the disorder
occurs and therefore entropy increases.
If any process is carried out between the limits of initial state 1 and final state 2, with the
absorption of heat qrev at constant temperature then the entropy change isshown as,
𝑞𝑟e𝑣
∆𝑆 =
𝑇
qrev/T is a state function which depends on the initial state (S1) and final state (S2)
If qrev is positive, (heat is absorbed) S is also positive indicating an increase inentropy. When heat is
evolved, qrev is negative and S is also negative indicating the decrease in entropy.
-1
SI units of entropy and change in entropy is Joules/ Kelvin (JK )
In a system, a part of the total energy supplied is converted into useful work and the rest is
unavailable. The part of energy which is converted into useful work is called the available energy,
which is called as the Gibbs free energy.
Available Energy = Total Energy-Unavailable Energy
Mathematical expression, 𝐺 = 𝐻 − 𝑇𝑆
1.3.7 Helmholtz Work Function (A)
We know that a part of internal energy of a system can be used at constant temperature to do
useful work.This part of the internal energy which is isothermally available to do useful work is called
work function (A) of the system. It is mathematically defined as
A=E-TS
So, the decrease in free energy accompanying a process at constant temperature and pressure, is equal
to the useful work obtainable from the system.
Consider a certain mass of an ideal gas in a cylinder fitted with a frictionless and weightless piston.
The gas is allowed to expand isothermally and reversibly. As the expansion is carried out
isothermally, there will be no change of internal energy.
i.e. ∆𝐸 = 0
Hence from the I Law equation,
∆𝐸 = q-w i.e., q=w
In such a case the work done in expansion of one mole of a gas from volume V 1 to V2 at constant
temperature ‘T’ is given by
w = PdV
𝑞𝑟e𝑣 =PdV
𝑞𝑟e𝑣 = 𝑛𝑅𝑇
𝑉2
𝑞𝑟ev = 𝑛𝑅𝑇𝑙𝑛
Change in entropy, ∆S is given as 𝑉1
𝑞𝑟e𝑣 1 𝑉2
∆𝑆 = = 𝑛𝑅𝑇 𝑙𝑛
𝑇 𝑇
𝑉1
ie, ∆𝑆 = 𝑛𝑅𝑙𝑛 𝑉2
𝑉1
∆𝑆 = 2.303 𝑛𝑅𝑙𝑛 𝑉2 / 𝑉1
1.State which of the following will have more entropy? Explain why?
a) Ice and water b) Water at 100O and c) steam at 100Oc
a) Water will have more entropy than ice
Entropy increases as Solid changes to liquid and liquid in turn changes to gas sincerandomness or
disorderliness increases in the above order.
2.Calculate the entropy change in the melting of one mole of ice at 0oC.Latent heat of
fusion of ice = 80 cals.
∆𝐻ƒ 𝐿ƒ × 𝑀
∆𝑆 = =
𝑇 𝑇
80 × 18
∆𝑆 =
273
∆𝑆= ∆Hf = Lf xM
T T
∆𝑆 = 4.184 𝑐𝑎𝑙𝑠/𝑚o𝑙/𝑑e𝑔
3. Helium,weighing 4 gm,is expanded from 1 atm to one tenth to the original pressure at 300
C.Calculate the change in its entropy, assuming it to be an ideal gas.
Solution
We know that
∆𝑆=2.303 X n X R X log P1/P2
Number of moles, n = Weight (in gm) = 4 = 1 mole
Mol.Wt 4
1/10
∆𝑆 =4.57 e.u
4.Explain why increasing the temperature of a gas increases its entropy. What effect does this have on
the internal energy of the gas?
Since the gas expands at a constant temperature, the molecules do not slow down, they just have
more places in the container where they can be in more disorder. Hence the entropy of a gas
increase on its expansion. Particles in an ideal gas are point masses. No size, no shape. The distances
between particles are very large. Therefore no attraction or repulsion between particles. The only thing
they can do is move about from one location to another. They collide with each other and change
direction and velocity. But there is no change in energy because collisions are perfectly elastic.
Therefore the only type of energy they have is kinetic energy. Temperature is a measure of the average
kinetic energy of these particles. When temperature increases, the average kinetic energy increases
(the particles move faster). When temperature decreases, they move slower.
5.One mole of an ideal gas is expanded isothermally at 298 K until its volume is tripled. Find
ΔSgas and ΔStotal under the following conditions: (a)Expansion is reversible (b) Expansion is
irreversible where 836.8 J less heat is absorbed than in the first (c) Free expansion.
1.4 Gibbs-Helmholtz equation
We know that,
𝐻 = 𝐸 + 𝑃𝑉
i.e., 𝐺 = 𝐸 + 𝑃𝑉 − 𝑇𝑆
on differentiation,
The first law equation for an infinitesimal change may be written as,
𝑑𝐸 = 𝑑𝑞 − 𝑑w ---------------------------------------------------(2)
𝑑𝑞 = 𝑑𝐸 + 𝑑w
𝑑𝑞 = 𝑑𝐸 + 𝑃𝑑𝑉
𝑑𝑞
𝑑𝑆 = (o𝑟)𝑑𝑞 = 𝑇𝑑𝑆
𝑇
𝑑𝑞 = 𝑇𝑑𝑆 = 𝑑𝐸 + 𝑃𝑑𝑉
(or)
constant pressure,
Let us consider a closed system. Let us assume that in the initial state, at temperature T, the
free energy of the system is G1. In the same initial state, attemperature T + dT, the free
energy of the system is G1 + dG1
In the final state, at temperature T, the free energy of the system is G2. In the samefinal state at the
same temperature T + dT, the free energy is G2 + dG2
𝑑𝐺1 = – 𝑆1𝑑𝑇
𝑑𝐺2 = – 𝑆2𝑑𝑇
𝑑𝐺2 – 𝑑𝐺1 = – 𝑆2𝑑𝑇 – (– 𝑆1𝑑𝑇)
𝑑(∆𝐺)
= −∆𝑆
𝑑𝑇
Since this equation is obtained by considering the change in free energy at constantpressure, it can be
written as,
= −∆𝑆 -----------------(7)
P
According to Gibb’s, G = H – TSFor
an isothermal process,
∆𝐺 = ∆𝐻 − 𝑇∆𝑆
∆𝐺 − ∆𝐻
= −∆𝑆 -----------------(8)
𝑇
Comparing equations (7) and(8),
∆G-∆H = - ∆S
T
∆G-∆H = T
P
T
∆G = ∆H + T
P --------------- (9)
(1) It is used to calculate the heat change H, for a process or a reaction taking place at
constant pressure provided the values of free energy change at two different temperatures
are known
(2) It is used to calculate H and S of a redox reaction taking place in a Galvanic
cell.
In a Galvanic cell electrical energy produced is equal to the freeenergy
decrease of the cell reaction.
Electrical energy produced =nFE
Where n is the no. of electrons
F is the FaradayE
is the emf
∆𝐺 = −𝑛𝐹𝐸 − − − − − − − −(1)
∆𝐺 = ∆𝐻 + 𝑇 P − − − − − − (2)
𝑇∂𝐸 ∆𝐻
𝐸− =
∂𝑇 −𝑛𝐹
∂(𝑛𝐹𝐸)
∆𝑆 =
∂𝑇
𝑛 𝐹∂(𝐸)
∆𝑆 =
∂𝑇
1.4.2 Gibbs – Helmholtz equation using work function ‘A’
𝑑𝐸 = 𝑇𝑑𝑆 − 𝑃𝑑𝑉
𝑑𝐴 = −𝑆𝑑𝑇
For a given system at state1 and state2
𝑑(∆𝐴) = −(∆𝑆)𝑑𝑇
If the volume is constant,
(
V
= − (∆𝑆) --------------------- (6)
From equation of work function,
𝐴 = 𝐸 − 𝑇𝑆
∆𝐴 = ∆𝐸 − 𝑇∆𝑆
∆A−∆𝐸
−∆𝑆 = (7)
T
comparing the equation (6) and (7)
− − − − − − − − − −(8
V =
= +T V
1. ΔH and ΔS for a reaction at 270C are -10 kcals and 20 cals K-1 respectively.What is ΔG for the
reaction?Predict whether the reaction will be feasible or not?
Solution : The free energy change is expressed as
∆𝐺 = ∆𝐻 − 𝑇∆𝑆
Given : ∆𝐻=-10 kcals (or) -10,000 cals ; ∆𝑆= 20 cals K-1
T= 27+273 = 300 K
∆𝐺 = -10,000 – 300 (20)
∆𝐺 = -16,000 cals
∆𝐺 = -16 kcals
As , ∆𝐺 is negative,the reaction is feasible.
2. Predict whether the following reaction is spontaneous at 250C. ΔH=31.4 kcals/mol ,
ΔS=32 cals/deg at 250C.
C(s)+H2O(l) CO(g)+H2(g)
Given : ΔH=31.4 kcals/mol or 31.4 X 103 cals mol -1, ΔS=32 cals/deg at 250C,T= 27+273= 300 K
Solution : The free energy change is expressed as
∆𝐺 = ∆𝐻 − 𝑇∆𝑆
∆𝐺 = 31.4 X 103 - 298 (32)
∆𝐺= 21864
∆𝐺= 2.186 kcals.
Since ∆𝐺 is positive, the reaction is not spontaneous at 250C.
Problems based on the Applications of Gibbs-Helmholtz Equation
1.The free energy change, ∆𝐺 for a process is -138 KJ at 300C and -135 KJ at 400C.Calculate the
change in entropy and ∆𝐻 accompanying the process at 350C.
Solution : According to Gibbs-Helmholtz equation
∆𝐺 = ∆𝐻 + 𝑇 ( ∂(∆𝐺) ) . P
∂𝑇
Here , d ∆𝐺 = ∆𝐺2 -∆𝐺1 and T = T2 - T1
∆𝐺1 = -138 KJ ; ∆𝐺2 = -135 KJ
T1 = 300 C = 30+273 = 3030 K
T2 = 400 C = 40+273 = 3130 K
=0.3 KJ
The change in free energy ΔG at 350 C may be taken as the average value of ΔG at 300 C
and 400 C.
i.e., T = 303+ 313
2
= 308 K
Hence ΔG at 3080 K = -135 + (-138)
2
= - 136.5 KJ
Putting these values in the Gibbs-Helmholtz equation and simplify for ΔH.
ΔG = ΔG - 𝑇 ( ∂(∆𝐺) ) . P
∂𝑇
= - 136.5 – 308 (0.3)
ΔG = - 228.9 KJ
Further ΔG = ΔH – TΔS
(Or)
ΔS = ΔH – ΔG
T
= -228.9 – (-136.5)
308
= - 92.4 / 308
ΔS = -300 J
𝐻= 𝐸 + 𝑃𝑉
𝐴= 𝐸 − 𝑇𝑆
𝐺= 𝐻 − 𝑇𝑆
∆𝐸 = 𝑞− W
From these equations we have,
𝑑𝐸 = 𝑑𝑞 − 𝑑W = 𝑇𝑑𝑆 − 𝑃𝑑𝑉 −I
Since, 𝑑𝑆 = 𝑑W = − 𝑃. 𝑑𝑉
𝑑𝑞,
𝑇
𝑑𝐻 = 𝑑𝐸 + 𝑃𝑑𝑉 + 𝑉𝑑𝑃 = 𝑇𝑑𝑆 + 𝑉𝑑𝑃 − II
𝑑𝐴 = 𝑑𝐸 − 𝑇𝑑𝑆 − 𝑆𝑑𝑇 = −𝑃𝑑𝑉 − 𝑆𝑑𝑇 − III
𝑑𝐺 = 𝑑𝐻 − 𝑇𝑑𝑆 − 𝑆𝑑𝑇 = 𝑉𝑑𝑃 − 𝑆𝑑𝑇 − IV
The above four equations are called fundamental equation of Thermodynamics.
I – relation:
Consider the fundamental equation
Equation – I, states that, the change of temperature with volume at constant entropy is negatively
equal to the change of pressure with entropy at constant volume. This is one form of Maxwell’s
relation
II – relation:
III – relation:
This is the third form of Maxwell’s relation which states that “the change of entropy with volume
at constant temperature is equal to the change of pressure with temperature at constant volume.
IV -relation
Consider another fundamental equation,
This is the fourth form of Maxwell’s relation which states that “the change of volume with temperature
at constant pressure is negatively equal to the change of entropy with pressure at constant temperature.