This document describes a PTFE membrane folded cartridge filter element with specifications of 0.22 μm pore size and 2.5" diameter with a flat silicone seal. The filter element uses a PTFE membrane layer supported by PP and housed in PP inner and outer frames, sealed with silica gel. It meets various quality standards for biosafety, cleanliness, endotoxins, and sterilization cycles, and can withstand temperatures up to 60°C and pressures up to 0.4MPa.
This document describes a PTFE membrane folded cartridge filter element with specifications of 0.22 μm pore size and 2.5" diameter with a flat silicone seal. The filter element uses a PTFE membrane layer supported by PP and housed in PP inner and outer frames, sealed with silica gel. It meets various quality standards for biosafety, cleanliness, endotoxins, and sterilization cycles, and can withstand temperatures up to 60°C and pressures up to 0.4MPa.
This document describes a PTFE membrane folded cartridge filter element with specifications of 0.22 μm pore size and 2.5" diameter with a flat silicone seal. The filter element uses a PTFE membrane layer supported by PP and housed in PP inner and outer frames, sealed with silica gel. It meets various quality standards for biosafety, cleanliness, endotoxins, and sterilization cycles, and can withstand temperatures up to 60°C and pressures up to 0.4MPa.