Professional Documents
Culture Documents
This blog is focused on New Asset accounting for ledger approach in multiple currency
environment. New Asset Accounting is the only Asset Accounting solution available in
S/4 HANA, classic Asset Accounting is not available any more.
I have covered following key topics within S/4 HANA New Asset Accounting keeping in
view various questions coming in from different customers/partners on this key
innovation step taken within Finance as part of S/4 HANA simplification and we need to
be very clear on this new requirement before starting the new or conversion S/4 HANA
project.
1. Pre-requisite Business Functions
2. Data Structure Changes in Asset Accounting
3. New FI-AA-Integration with the Universal Journal Entry
4. Asset Accounting Parallel Valuation
5. Key Configuration Consideration in Ledger Approach
6. Why will use a technical clearing GL account
7. New Asset Accounting Posting Logic
8. FI-AA Legacy Data Transfer
9. Adjusting chart of Depreciation Prior to Conversion
10. Installing SFIN in Conversion/Migration Scenario
11. Subsequently create a new depreciation area in New Asset Accounting
Asset Accounting is based on the universal journal entry. This means there is no longer any redundant data
store, General Ledger Accounting and Asset Accounting are reconciled Key changes are listed below: –
There is no separate balance carry forward needed in asset accounting, the general
balance carry forward transaction of FI (FAGLGVTR) transfers asset accounting
balances by default.
The program Fixed Assets-Fiscal Year Change (RAJAWE00) transaction AJRW is no
longer has to be performed at fiscal year change
Planned values are available in real time. Changes to master data and transaction data
are constantly included
The most current planned depreciation values will be calculated automatically for the
new year after performing the balance carry forward. The depreciation run posts the
pre-calculated planned values.
The Selection screen is simplified as the “reasons for posting run” (planned depreciation
run, repeat, restart, unplanned posting run) are no longer relevant.
Errors with individual assets do not necessarily need to be corrected before period-end
closing; period-end closing can still be performed. You have to make sure that all assets
are corrected by the end of the year only so that depreciation can be posted completely.
All APC changes in Asset Accounting are posted to the general ledger in real time.
Periodical APC postings are therefore no longer supported.
Transaction types with restriction to depreciation areas are removed in new Asset
Accounting and you can set the obsolete indicator in the definition of the transaction
that were restricted to depreciation areas in the classic asset accounting.
4. Asset Accounting Parallel Valuation
Very Important part of new Asset accounting is parallel valuation in multicurrency
environment.
The leading valuation can be recorded in any depreciation area. It is no longer necessary
to use depreciation area 01 for this. The system now posts both the actual values of the
leading valuation and the values of parallel valuation in real time. This means the
posting of delta values has been replaced; as a result, the delta depreciation areas are no
longer required.
New Asset Accounting makes it possible to post in real time in all valuations (that is, for
all accounting principles). You can track the postings of all valuations, without having to
take into account the postings of the leading valuation, as was partly the case in classic
Asset Accounting.
5. Key Configuration Consideration in Ledger Approach
We need to answer some basic question before configuring new asset accounting in S4 Hana environment
as this would determine the required minimum depreciation areas to align the FI with Asset Accounting.
i.e.
In this Example we have one com code which has 2 ledgers 0L & N1 & these 2 ledgers having 3
currencies i.e 10,30 & 40 as shown below.
Above mapping is to ensure and establish link between depreciation area/accounting principal and
Currency
Explaining with ledger approach example. From release 1503 i.e initial version of SAP Finance add on
version in S4 Hana a new table ACDOCA is introduced which stores the asset values also per ledger /per
currency on real time basis & no need to have any reconciliation between Finance and Asset accounting
and to do so it is must to follow the guidelines while setting up depreciation areas & respective currencies,
which I have tried to explain with an example as given below: –
Ledger & currency setting has to be done in New GL in the following SPRO node.
Financial Accounting (New)–> Financial Accounting Global Settings (New)–> Ledgers–> Ledger –>
Define Settings for Ledgers and Currency Types
Fixed Asset Accounting currently only supports the FI relevant (BSEG-) Currencies.
For additional currency types, which are not BSEG relevant, you do not need to create dep area; these
currencies are converted during posting. This means, the sum of all depreciations does not balance with
the activation value for the additional currencies.
It is on roadmap for later releases, that Fixed Asset Accounting calculates the
depreciation with the historic (activation) values in all currencies, but currently
Fixed Asset Accounting does this only in the BSEG Currencies.
Define Depreciation Areas
Depreciation Areas defined as per new FI-GL & FI-AA requirement so here at least 6 depreciation areas
are must so that ledger wise each currency can be represented in separate depreciation area & these
depreciation area is assigned to Accounting principal.
In this activity, you define transfer rules for the posting values of depreciation areas. These transfer rules
let you ensure that certain depreciation areas have identical asset values
In this activity, you specify how the depreciation terms for a depreciation area are adopted from another
depreciation area. You can specify if the adoption of values is optional or mandatory. If you specify an
optional transfer, then you can change the proposed depreciation terms in the dependent areas in the asset
master record. In the case of a mandatory transfer, you cannot maintain any depreciation terms in the asset
master record. In this way, you can ensure that depreciation is uniform in certain depreciation areas.
For every additional currency type defined on the company code a corresponding depreciation area needs
to be set up.
As explained in previous step here we need to define the currency for each dep area so for example if a
company code has 2 ledgers i.e 0L and N1 with 3 currencies then at least 6 depreciation areas should be
setup & currencies should be assigned for each depreciation area ( Here leading valuation depreciation area
will derive currency from com code currency)
Here we need to specify the Currency type for each for the Depreciation area which will align FI Currency
type with Asset Depreciation areas & accordingly will be updated in ACDOCA.
With this setting its ensured that all currency types are aligned with respective depreciation area and asset
values are getting updated parallel to Financial accounting per currency.
6. Why will use a technical clearing GL account
Architecture has been changed in the way that we now post in asset accounting for each valuation a
separate document. So we perform on the asset part accounting principle specific postings. Technically we
perform ledger-groups specific postings.
On the operational part (accounts receivable, accounts payable) the value is always the same for each
accounting principle. So for the operational part we have to perform postings which are valid for all
accounting principles. Technically we perform postings without specifying the ledger-group.
To split the business process in an operational and a valuating document there was a need to establish the
“technical clearing account” for integrated asset acquisition.
For the operational part (vendor invoice/GRIR), the system posts a document valid for all
accounting principles against the technical clearing account for integrated asset acquisitions. From
a technical perspective, the system generates a ledger-group-independent document.
For each valuating part (asset posting with capitalization of the asset), the system generates a
separate document that is valid only for the given accounting principle. This document is also
posted against the technical clearing account for integrated asset acquisitions. From a technical
perspective, the system generates ledger-group-specific documents.
Define account “Technical clearing account” for integrated asset acquisition.
Here Operational document type will have original document used during entry & while generating
accounting principal wise separate document it would be document type AA.
Universal Table updated with respective ledger (0L & N1) and currencies.
Correction Asset Acquisition value in specific GAAP
In this case, you do not need to include any posted depreciation or transactions in the transfer of legacy
data. You only need to transfer master data and the cumulative values as of the end of the last closed fiscal
year.
Scenario 2: Transfer During the Fiscal Year
Along with the general master data, and the cumulative values from the start of the fiscal year (time period
A), you must also transfer the following values.
Depreciation during the transfer year and Transactions during the transfer year
Include the depreciation posted in the legacy system since the end of the last closed fiscal
year up to the date of transfer (time period B).
Any asset transactions in your legacy system that have a value date after the transfer date,
but before the date of the physical transfer of data (time period C), need to be posted
separately in the Asset Accounting component in any case.
Example of scenario 2 Legacy Data Transfer During the Fiscal year:-
Case: Legacy asset is acquired in previous year 01.01.2015 and taken over into simple finance system in
mid-year of current year (30.04.2017)
Specify Transfer Date/Last Closed Fiscal Year (V_T093C_08)
Specify Last Period Posted in Prv. System (Transf. During FY) (OAYC)
Step 1:- AS91 to create Legacy asset master data
Step 2:- ABLDT to update Legacy Original Acquisition Value/ Accumulated Depreciation and current
year Depreciation Posted.
Step 3: Verify Legacy Asset Planned Value
Note:-
SAP has provided standard tool to create legacy asset as well as upload balances together using transaction
code LTMC .
Alternatively you may use BADI also as per SAP note 2270388 , this note as very detailed and explains
most of the changes with new Asset accounting in S/4HANA.
9. Adjusting Chart of Depreciation prior to Conversion
For the leading valuation of the ledger approach and accounts approach and for parallel
valuations of the ledger approach its must that the parallel currencies in the leading ledger
in General Ledger Accounting and in the depreciation areas in Asset Accounting must be
the same as explained one example above with ledger approach scenario.
Using the migration program available under Migration Tools, you can automatically adjust
the parameters in your charts of depreciation. If error messages appear stating that
automatic adjustment is not possible, you have to adjust the charts of depreciation manually.
If until now you have been using parallel currencies in General Ledger Accounting, but you
have not implemented the corresponding parallel currency areas in Asset Accounting for all
depreciation areas, you must implement these areas in a separate project before you install
SAP Simple Finance. In such a project, you must first perform the preparatory steps for
creating depreciation areas in Customizing; you must then determine the new values for
each fixed asset for a newly created depreciation area.
For company codes that are assigned to the same chart of depreciation, these company codes
are not allowed to differ in number and type from the parallel currencies used in General
Ledger Accounting.
Even if you migrate to SAP Accounting powered by SAP HANA from a system (e.g. EHP7)
having FI-AA (new) already active, you still must migrate every active chart of depreciation.
10. Installing SFIN in Conversion/Migration Scenario
From the viewpoint of Asset Accounting, it is not necessary that you install SAP Simple Finance at the end
of the year or period. However, it is required that you perform a complete period-end closing directly
before you install SAP Simple Finance and some of the important point you must consider w.r.t New Asset
Accounting. (for detail you may refer conversion guide)
To check if the prerequisites outlined are met, you have to check using the program for
preliminary checks RASFIN_MIGR_PRECHECK. You import the current version of this
program using SAP Note 1939592, before you install SAP Simple Finance in your system.
Perform this check in all of your systems – in the Customizing system as well as in the
downstream systems (test system and production system).
If until now you updated transactions in parallel valuations with different fiscal year
variants and want to continue using this update, then you must implement a new
representative ledger using the SAP General Ledger Migration Service before you install
SAP Simple Finance. For more information about alternative fiscal year variants with
parallel valuation, see SAP Note 2220152 Information published on SAP site.
You must have performed periodic APC posting (RAPERB2000) completely; the timestamp
must be current.
Execute the periodic depreciation posting run (RAPOST2000).
Run the program for recalculating depreciation (transaction AFAR).
Reconcile your general ledger with the Asset Accounting subsidiary ledger, both for your
leading valuation and for parallel valuations.
The migration must take place at a time when only one fiscal year is open in Asset
Accounting.
You can check which fiscal year is closed in your company code in Customizing for Asset
Accounting (New) under Preparations for Going Live à Tools à Reset Year-End Closing.
Ensure that no further postings are made in your system after running period end
transactions before installing S4 Hana Simple Finance hence lock the users.
Perform a backup before installing SFIN
As soon as you have installed SAP Simple Finance, you can no longer post in Asset
Accounting. To ensure that migration is successful, it is essential that you make sure that the
prerequisites are met and a complete period-end closing was performed before you install
SAP Simple Finance. Posting for new Asset Accounting is only possible again after you have
completed the migration fully and successfully.
After completing the migration, make sure that no fiscal year that is before the migration is
reopened in Asset Accounting.
11. Subsequently create a new depreciation area in New Asset Accounting.
Program RAFABNEW
This programme RAFABNEW Subsequent implementation of a new depreciation area available is not
available with SAP S/4HANA because of Introduction of the journal entry with changed data structures
Hence if you need to setup a depreciation area as part of requirement of conversion from ECC to
S/4HANA then setup new depreciation area in ECC only using programme RAFABNEW
Program RAFAB_COPY_AREA
This programme is available with SAP S/4HANA 1809 version onwards and this can be used to setup a
new derpreciation area in SAP S/4HANA
Latest Updates on year end closing for S/4HANA 1909 and 2020
As of release SAP S/4HANA 1909, year-end closing is executed and reset using transaction FAA_CMP.
The following applies for a ledger:
You can close a fiscal year for accounting for a ledger or a depreciation area.
You can also reopen the fiscal year last closed for one or more depreciation areas.
Despite these adjustments, program RAJABS00 (transaction AJAB) is still available in the SAP Easy
Access menu (only until release SAP S/4HANA 1909).
In addition, as of SAP S/4HANA 2020, the program Year-End Closing Asset Accounting (Cross-Company
Code and Ledger) (program FAA_CLOSE_FISCAL_YEARS, transaction FAA_CLOSE_FISC_YEARS)
is available. You use this program to close a fiscal year from an accounting perspective for one or more
company codes or ledgers.
For detail you may refer SAP note 2270388
Additional updates regarding business functions:-
EA-FIN
Before the installation of the SAP S/4HANA, you must activate Financials Extension (EA-FIN), this will
enable the new depreciation calculation engine, also EA-FIN should be activated in ECC system before
installing SAP S/4HANA as a separate project activity.
FIN_AA_PARALLEL_VAL
This business function is available from ECC 6.0 EHP7 SPS2 onwards and supports you with parallel
accounting. Asset Accounting performs real ledger-group-specific postings. In contrast to the use of delta
depreciation areas, postings are now fully clear and trackable. In addition, this opens up improved options
in reporting. You can now flexibly assign the depreciation areas of new Asset Accounting to the ledger
groups of the general ledger. The fixed linkage of depreciation area 01 to the leading ledger in the general
ledger no longer applies. The system posts parallel values with the actual values in Realtime; separate
documents are posted for each valuation. This means the posting of delta values has been replaced; as a
result, the delta depreciation areas are no longer required.
When you migrate to SAP S/4HANA you will be automatically switched to new asset accounting. The
new asset accounting is activated as soon as the FIN_AA_PARALLEL_VAL is activated
New Asset Accounting is the only solution going forward. Note that this is no longer dependent on the
FIN_AA_PARALLEL_VAL business function. If you go to SFW5 and see that it’s inactive, you may
think that New Asset Accounting is not active, but that’s not the case. Whether the function is active or
not, only New Asset Accounting is in the system as this is by default option with SAP S/4HANA without
them being linked to the business function.