Professional Documents
Culture Documents
Code_Aster default
Titre : SSNP157 – Benchmark NAFEMS de validation du contac[...] Date : 05/08/2013 Page : 4/6
Responsable : DE SOZA Thomas Clé : V6.03.157 Révision :
e21252ff040d
3 Modeling A
3.1 Characteristics of modeling
Modeling is D_PLAN_SI, the formulation of the contact is CONTINUOUS.
3.4 Remarks
The results got into quadratic with friction by the formulation continues are in very good agreement
with the reference as shown in the figure following.
For correctly treating the incompressibility of the under-integrated quadratic elements were used.
Moreover in order to minimizing the computing times, the Poisson's ratio adopted in calculation is
0.49.
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2017 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)