Professional Documents
Culture Documents
Focke F5 Integration Info Nov17
Focke F5 Integration Info Nov17
D320i integration
This presentation is strictly commercial in confidence and is not to be used or any parts copied without prior permission of Domino
About this document
• F5, Fx (KS, Slim or Nano) with a 150mm 2nd drum and F8 require two
lasers in the 2nd drying drum position
• If the customer decides not to use Focke for the supply of the lasers they
can purchase the lasers locally from Domino, but the customer must
confirm in writing that Focke will prepare the packer for laser integration
• The customer is to confirm to the Domino channel that the packer will
be delivered from Focke with the following preparation for integration:
– Modifications required to packer frame or chassis (drilling or cutting)
– ‘Coding cam’ for 2nd drum gearbox
– Modifications to 2nd drum including any pack control system
– Laser support brackets
– Laser guarding
– Associated laser guarding interlocks
– BCP7 laser controller support brackets
– Extraction housing
– All required cabling for control & power (excluding any cables as detailed in
the ‘Domino BOM – Laser’ )
– Access to the Domino lasers will be via a Focke HMI using Domino D-Series
browser so this function needs to be prepared
Typical twin D320i laser integration by Focke
Scope of supply from Focke
• Laser guarding
VA32091
‘Short’ beam
delivery
VA32092
‘Long’ beam
delivery
Domino BOM - Extraction
• A large diameter hose is used from the DPX 1000 into the Packer
• Inside the Packer the extraction is split to Laser 1 and Laser 2 suction chambers which
form part of the Focke supplied guarding.