Professional Documents
Culture Documents
24
de
Your ENA Micro 1
Symbol description 26
en
Control elements 27
Important information 29
Proper use................................................................................................................................................................29
For your safety........................................................................................................................................................29
1 Preparing and using for the first time 31
Setting up the machine..........................................................................................................................................31 fr
Filling the bean container......................................................................................................................................31
First-time use............................................................................................................................................................31
First-time use with filter cartridge activation....................................................................................................32
First-time use without filter cartridge activation..............................................................................................32
Adjusting the grinder.............................................................................................................................................33
Filling the water tank.............................................................................................................................................33
it
Determining the water hardness.........................................................................................................................34
2 Preparation 34
Ristretto, espresso and coffee..............................................................................................................................34
Permanently setting the amount of water for the cup size............................................................................34
Ground coffee..........................................................................................................................................................35
3 Daily operation 35
nl
Switching on the machine....................................................................................................................................35
Daily maintenance..................................................................................................................................................36
Switching off the machine....................................................................................................................................36
4 Permanent settings in programming mode 36
Inserting and activating the filter........................................................................................................................36
Setting the water hardness...................................................................................................................................37
es
5 Maintenance 37
Cleaning the machine............................................................................................................................................37
Descaling the machine .........................................................................................................................................38
Changing the filter.................................................................................................................................................39
Descaling the water tank...................................................................................................................................... 40
Cleaning the bean container............................................................................................................................... 40
6 Messages on symbol display 41
pt
7 Troubleshooting 42
8 Transport and environmentally friendly disposal 43
Transport / Emptying the system........................................................................................................................43
Disposal....................................................................................................................................................................43
9 Technical data 43 ru
10 Index 44
11 JURA contact details / Legal information 46
25
Symbol description
Symbol description
Warnings
J WARNING Always take note of any information marked with the words CAUTION or WARNING
J CAUTION and a warning sign. The signal word WARNING draws your attention to potential
serious injury, and the signal word CAUTION to potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T Prompt to take action. This symbol means that you are being prompted to perform
some action.
E Information and tips to make it even easier to use your ENA.
26
de
Control elements
Control elements
1 en
5
fr
it
4 nl
es
ru
27
Control elements
1 3
4
2
1 Cover for powder chute for ground coffee 3 Cover cap for grinder adjustment switch
2 Powder chute for ground coffee 4 Grinder adjustment switch
28
de
Important information
29
Important information
UU Protect the ENA from environ- UU Do not fill the bean container
mental influences such as rain, with water.
frost and direct sunlight. UU Switch the machine off with the
UU Do not immerse the ENA, mains On/Off button if you are going to
cable or connections in water. be absent for a longer period of
UU Do not put the ENA or any time and remove the mains plug
individual parts in the dish- from the power socket.
washer. UU Children may not clean or ser-
UU Switch your ENA off before clean- vice the machine unless super-
ing work with the On/Off button. vised by a responsible person.
Always wipe the ENA with a UU Do not allow children to play
damp cloth rather than a wet with the machine.
one, and protect it from pro- UU Keep children under the age of 8
longed exposure to water splash. away from the machine, or
UU Only connect the machine to the supervise them constantly.
mains voltage in accordance UU Children aged 8 and over may
with the information on the only operate the machine with-
rating plate. The rating plate is out supervision if they have been
located on the underside of your instructed in how to use it safely.
ENA. Further technical data is Children must be able to recog-
provided in these instructions for nise and understand the poten-
use (see Chapter 9 ‘Technical tial dangers arising from incor-
data’). rect use.
UU Please only use original JURA
People, including children, who
maintenance products. Use of
products that are not explicitly UU do not have the physical, sen-
sory or mental capabilities to use
recommended by JURA could
the machine safely or
damage the ENA.
Do not use any coffee beans UU are inexperienced or lack knowl-
UU edge in how to use the machine
treated with additives or cara-
safely
melised coffee beans.
must be supervised by a responsi-
UU Only fill the water tank with
ble person when using it, or must
fresh, cold water.
be instructed in how to use it
correctly.
30
de
1 Preparing and using for the first time
Safety when handling the CLARIS 1 Preparing and using for the
Blue filter cartridge: first time
UU Filter cartridges should be kept This chapter provides you with the information en
out of the reach of children. you need to use your ENA without any problems.
UU Store filter cartridges in a dry You will prepare your ENA step-by-step to enjoy
your first perfect cup of coffee.
place in the sealed packaging.
UU Protect cartridges from heat and EE Visit us on the internet. On the JURA
website (www.jura.com) you will find
direct sunlight. fr
interesting and up-to-date information on
UU Do not use damaged filter your ENA and every aspect of coffee.
cartridges.
UU Do not open filter cartridges. Setting up the machine
When setting up your ENA, please note the
following: it
UU Place the machine on a horizontal surface that
is not sensitive to water.
UU Choose a spot for your ENA which protects the
machine against overheating. Ensure that the
ventilation slots are not covered.
nl
Filling the bean container
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
es
T Only use roasted, untreated coffee beans to
fill the bean container.
First-time use
When using the machine for the first time, you can
choose whether you want to operate ENA with or ru
without the CLARIS Blue filter cartridge. If the
water hardness is 10 °dH or more, we recommend
using the filter cartridge. If you do not know the
31
1 Preparing and using for the first time
hardness of your water, you can find this out first EE After two months, the filter will cease to
(see Chapter 1 ‘Preparing and using for the first work. Set the date on the date plate on the
time – Determining the water hardness’). filter holder in the water tank.
EE The On/Off button also acts as a power T Fill the water tank with fresh, cold water and
switch. When the ENA is switched off, the reinsert it.
machine does not consume standby energy. The Filter symbol ! lights up.
! T Touch the Filter symbol.
The Y, <, > and ! symbols flash. The filter
J WARNING is rinsed and the water flows directly into the
If the machine is operated with a defective mains
drip tray.
cable, there is a danger of potentially fatal electric
Rinsing of the filter stops automatically. The
shock.
machine heats up.
T Never use a machine which is damaged or
The Y, < and > symbols flash. The
has a defective mains cable.
machine is rinsed, water flows out of the
Precondition: Bean container is filled. coffee spout. The rinse stops automatically.
T Insert the mains plug into a power socket. The Coffee Grounds Container symbol ?
Q T Press the On/Off button to switch the lights up.
machine on. T Empty the coffee grounds container and
The Descaling symbol & and the Filter drip tray and rinse with warm water.
symbol ! are lit up. T Reinsert the coffee grounds container and
the drip tray.
EE Now decide whether you want to operate The Ristretto Y, Espresso < and Coffee >
your ENA with or without a CLARIS Blue symbols and the symbol for ‘strong’ coffee
filter cartridge. strength _ light up. Your ENA is ready for
use.
First-time use with filter cartridge
activation First-time use without filter cartridge
! T Touch the Filter symbol.
activation
The Water Tank symbol M lights up. If you do not want to use the CLARIS Blue filter
T Remove the water tank. cartridge, you will need to set the water hardness.
T Open the filter holder. The following water hardness settings are available:
T Insert the filter cartridge into the water tank, Water hardness Symbol(s) shown in display
exerting slight pressure.
Level 1: 1 symbol illuminated
1 – 15 °dH Y
Level 2: 2 symbols illuminated
16 – 23 °dH Y<
Level 3: 3 symbols illuminated
24 – 30 °dH Y<>
32
de
1 Preparing and using for the first time
T Touch the Y, < or > symbol to set the EE For a coarser consistency of grind, turn the
water hardness, e.g. symbol Y for ‘level 1’. switch to the left, for a finer grind, turn it to
The Y and & symbols light up. the right.
& T Touch the Descaling symbol. en
The consistency of grind is correct if the coffee
The Water Tank symbol M lights up.
flows regularly from the coffee spout. In addition a
T Place a receptacle under the coffee spout.
fine, thick crema forms.
T Remove the water tank.
T Fill the water tank with fresh, cold water and Example: Change the consistency of grind during
reinsert it. the preparation of a ‘strong’ espresso.
T Place a cup under the coffee spout.
fr
T Open the cover of the grinder adjustment
switch.
it
The Y, < and > symbols flash. The system
fills with water and the water flows directly
into the drip tray.
The operation stops automatically. The _ T Touch the symbol for ‘strong’ coffee
machine heats up. strength.
The Y, < and > symbols flash. The The ‘strong’ _ symbol lights up. nl
machine is rinsed, water flows out of the < T Touch the Espresso symbol to start
coffee spout. The rinse stops automatically. preparation.
The Ristretto Y, Espresso < and Coffee > T Turn the grinder adjustment switch to the
symbols and the symbol for ‘strong’ coffee desired position while the grinder is
strength _ light up. Your ENA is ready for running.
use. The preset amount of water flows into the es
cup. Preparation stops automatically.
Adjusting the grinder
Filling the water tank
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee. Daily maintenance of the machine and hygiene
when handling coffee and water are key to a
CAUTION perfect coffee result in the cup every time. You pt
If you adjust the consistency of grind when the should therefore change the water daily.
grinder is not operating, the grinder adjustment
switch could be damaged. CAUTION
T Only adjust the consistency of grind when Milk, sparkling mineral water or other liquids can
the grinder is running. damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
ru
33
2 Preparation
T Remove the water tank and rinse with cold EE Before and during the grinding operation
water. you can select the coffee strength for
ristretto Y, espresso < and coffee >:
‘normal’ (;), ‘strong’ (_).
T Fill the water tank with fresh, cold water and Your ENA features an energy-saving mode: Soon
reinsert it. after the last preparation, the ENA stops heating
up. To indicate that the machine is in energy-
saving mode, after about 5 minutes the brightness
Determining the water hardness
of all the symbols is reduced. The ENA must heat
You can find out what the water hardness is by back up before the next preparation.
using the Aquadur® test strip supplied as standard.
T Hold the test strip briefly (for one second) Coffee tastes best served hot. A cold porcelain cup
under running water. cools the beverage – and impairs the taste. We
T Shake off the water. therefore recommend prewarming the cups. The
T Wait for about one minute. full coffee aroma can develop only in prewarmed
T You will then be able to read the degree of cups. You can purchase a JURA cup warmer from
water hardness from the discolouration of your specialised dealer.
the Aquadur® test strip and the description
on the packaging. Ristretto, espresso and coffee
Ristretto Y, espresso < and coffee > are all
prepared following this model.
Example: Proceed as follows to prepare one coffee.
Precondition: Your ENA is ready for use.
T Place a cup under the coffee spout.
> T Touch the Coffee symbol to start prepara-
tion.
The coffee symbol > and coffee strength
The water hardness can now be set. symbol (; or _) flash, the preset amount of
water flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
2 Preparation
EE While a speciality coffee is being prepared, Permanently setting the amount of water
you can stop preparation at any time. Simply for the cup size
touch the symbol for the product in
It is easy to make permanent settings for the
question.
amount of water for all speciality coffees according
to the cup size. Adjust the amount once as shown
34
de
3 Daily operation
in the following example. Every time you prepare a All speciality coffees with ground coffee are
drink in the future, this amount of water will be prepared following this model.
dispensed. Example: Prepare a cup of coffee using ground
Example: Permanently adjust the amount of coffee. en
espresso to the cup size. Precondition: Your ENA is ready for use.
Precondition: Your ENA is ready for use. T Place a cup under the coffee spout.
T Place a cup under the dual spout. T Open the powder chute for ground coffee.
< T Touch the Espresso symbol for about The Ground Coffee symbol v lights up.
3 seconds until the Ristretto Y and T Place the filler funnel for ground coffee on
coffee > symbols appear again. the powder chute. fr
< T Release the Espresso symbol.
The espresso is prepared. The Espresso
symbol < and coffee strength symbol
(; or _) are flashing.
< T Touch the Espresso symbol as soon as there
is enough espresso in the cup.
Preparation stops. The amount of water for it
one espresso is permanently stored.
The Espresso symbol < and coffee strength
T Place one level measuring spoon of ground
symbol (; or _) flash until the machine is
coffee into the filler funnel.
ready for use again.
T Close the powder chute for ground coffee.
EE You can alter this setting at any time by The Y, <, > and v symbols flash.
The Y, < and > symbols light up.
nl
repeating the above procedure.
> T Touch the Coffee symbol to start prepara-
tion.
Ground coffee
The Coffee symbol > flashes, the preset
You can choose to use a second coffee variety, for amount of water flows into the cup.
example decaffeinated coffee, with the powder Preparation stops automatically. Your ENA is
chute for ground coffee. once more ready for use. es
EE Use ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
3 Daily operation
drips. Switching on the machine
EE Never add more than one level measuring
spoon of ground coffee. Daily maintenance of the machine and hygiene pt
EE The desired speciality coffee must be when handling coffee and water are key to a
prepared within approximately one minute perfect coffee result in the cup every time. You
after filling with the ground coffee. should therefore change the water daily.
Otherwise the ENA stops the operation and
When the machine is switched on, it is automati-
is once more ready for use.
cally rinsed.
EE If you did not add a sufficient amount of ru
T Place a receptacle under the coffee spout.
ground coffee, the Y, <, > and v symbols
Q T Press the On/Off button to switch the
flash and the ENA stops the operation.
machine on.
35
4 Permanent settings in programming mode
The Y, < and > symbols flash, the EE If no action is performed on the machine for
machine heats up. 30 minutes, the ENA will automatically
The machine is rinsed, water flows out of the switch off to save energy.
coffee spout. The rinse stops automatically.
Your ENA is ready for use.
4 Permanent settings in pro-
Daily maintenance gramming mode
To ensure that you get many years of reliable
Inserting and activating the filter
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily Your ENA no longer has to be descaled if you are
maintenance. using the CLARIS Blue filter cartridge. If you did not
T Remove the drip tray. activate the filter cartridge the first time you used
T Empty the coffee grounds container and the machine, you can do this now as follows.
drip tray and rinse with warm water.
EE Perform the ‘inserting the filter’ operation
EE Always empty the coffee grounds container without any interruptions. This will ensure
when the machine is switched on. This is the that your ENA always produces its best.
only way of resetting the coffee grounds
Precondition: Your ENA is ready for use.
counter to zero.
T Touch the ; and _ symbols for approxi-
T Reinsert the coffee grounds container and mately 2 seconds.
the drip tray. The ;, _, & and L symbols light up brightly.
T Rinse the water tank with clean water. ! T Touch the Filter symbol for approximately
T Wipe the surface of the machine with a 2 seconds.
clean, soft, damp cloth (e.g. microfibre The Water Tank symbol M lights up.
cloth). T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
Switching off the machine exerting slight pressure.
When the ENA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button.
The Y, < and > symbols flash. The
machine is rinsed, water flows out of the
coffee spout.
The rinse stops automatically. Your ENA is T Close the filter holder. It will click into place
switched off. audibly.
EE When the ENA is switched off with the On/ EE After two months, the filter will cease to
Off button, the machine does not consume work. Set the date on the date plate on the
standby energy. filter holder in the water tank.
36
de
5 Maintenance
T Fill the water tank with fresh, cold water and & T Briefly touch the Descaling symbol.
reinsert it. The &, Y and < symbols light up.
The Coffee Grounds Container symbol ? > T Touch the Coffee symbol.
lights up. The &, Y, < and > symbols light up. en
T Empty the drip tray and coffee grounds & T Touch the Descaling symbol to confirm that
container and reinsert them. you want to set the water hardness to
The Filter symbol ! lights up. ‘level 3’.
! T Touch the Filter symbol to start rinsing of Your ENA is once more ready for use.
the filter
The Y, <, > and ! symbols flash. The filter fr
is rinsed. 5 Maintenance
Rinsing of the filter stops automatically. The
Coffee Grounds Container symbol ? lights Your ENA has the following integrated mainte-
up. nance programmes:
T Empty the drip tray and coffee grounds UU Cleaning the machine
container and reinsert them. UU Descaling the machine
it
The Y, < and > symbols flash, the UU Changing the filter
machine heats up. Your ENA is once more
ready for use. Cleaning the machine
After 180 preparations or 80 switch-on rinses, the
Setting the water hardness ENA will prompt you to clean it.
EE If you are using the CLARIS Blue filter nl
cartridge and have activated it, there is no CAUTION
need to set the water hardness. If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
The harder the water is, the more frequently the behind in the water.
ENA needs to be descaled. It is therefore important T Use only original JURA maintenance
to set the water hardness accurately. products.
es
The following water hardness settings are available:
EE The cleaning programme lasts approxi-
Water hardness Symbol(s) shown in display
mately 15 minutes.
Level 1: 1 symbol illuminated EE Do not interrupt the cleaning programme.
1 – 15 °dH Y The quality of cleaning will be impaired if
Level 2: 2 symbols illuminated you do so.
16 – 23 °dH Y< EE JURA cleaning tablets are available from pt
Level 3: 3 symbols illuminated specialised dealers.
24 – 30 °dH Y<>
Precondition: Your ENA is ready for use. The
Example: Change the water hardness setting from Cleaning symbol L lights up.
‘level 2’ (Y <) to ‘level 3’ (Y < >). L T Touch the Cleaning symbol for approxi-
Precondition: Your ENA is ready for use. mately 2 seconds.
T Touch the ; and _ symbols for approxi- The Coffee Grounds Container symbol ? ru
mately 2 seconds. lights up.
The ;, _, & and L symbols light up brightly.
37
5 Maintenance
T Empty the drip tray and coffee grounds Descaling the machine
container and reinsert them.
The ENA builds up deposits of limescale over time
The Cleaning symbol L lights up.
and automatically prompts you to descale it when
T Place a receptacle under the coffee spout.
necessary. The degree of calcification depends on
L T Touch the Cleaning symbol.
the hardness of your water.
The Y, <, > and L symbols flash, water
flows out of the coffee spout. J CAUTION
The operation is interrupted, the Ground If the descaling agent comes into contact with the
Coffee symbol v lights up. skin or eyes, this can cause irritation.
T Open the powder chute for ground coffee T Avoid contact with the skin or eyes.
and drop in a JURA cleaning tablet. T Rinse off the descaling agent with clean
water. Should you get any descaling agent in
your eye, see a doctor.
CAUTION
If the wrong descaling agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
T Close the powder chute for ground coffee.
The Cleaning symbol L lights up. CAUTION
L T Touch the Cleaning symbol. If the descaling operation is interrupted, there may
The Y, <, > and L symbols flash, water be damage to the machine.
flows out of the coffee spout several times. T Allow the descaling programme to run to
The operation is interrupted, the Coffee the end.
Grounds Container symbol ? lights up.
T Empty the drip tray and coffee grounds CAUTION
container and reinsert them. If the descaling agent comes into contact with
The Y, < and > symbols flash. The sensitive surfaces (e.g. marble), damage cannot be
machine heats up. ruled out.
Your ENA is once more ready for use. T Clean up any splashes immediately.
Cleaning the machine without a prompt: You EE The descaling programme lasts approxi-
can initiate the 'Cleaning the machine' operation mately 40 minutes.
manually at any time as long as the machine is EE JURA descaling tablets are available from
ready for use. Touch the ; and _ symbols at specialised dealers.
the same time for approximately 2 seconds. EE If you use a CLARIS Blue filter cartridge and
The ;, _, L and & or ! symbols light up brightly. this is activated, you will not be prompted to
Continue with the first prompt (indicated by T) descale.
as described in this section. Precondition: Your ENA is ready for use. The
Descaling symbol & lights up.
& T Touch the Descaling symbol for approxi-
mately 2 seconds.
The Coffee Grounds Container symbol ?
lights up.
38
de
5 Maintenance
T Empty the drip tray and coffee grounds EE If the descaling operation stops unexpect-
container and reinsert them. edly, rinse the water tank thoroughly.
The Water Tank symbol M flashes.
Descaling the machine without a prompt: You en
T Remove and empty the water tank.
can initiate the 'Descaling the machine' operation
T Completely dissolve the contents of one blis-
manually at any time as long as the machine is
ter (three JURA descaling tablets) in a
ready for use. Touch the ; and _ symbols at
receptacle holding 500 ml of water. This may
the same time for approximately 2 seconds.
take several minutes.
The ;, _, L and & symbols light up brightly.
Continue with the first prompt (indicated by T) as
described in this section. fr
39
5 Maintenance
EE After two months, the filter will cease to T Rinse the water tank thoroughly.
work. Set the date on the date plate on the T If you use a CLARIS Blue filter cartridge,
filter holder in the water tank. reinsert it.
T Fill the water tank with fresh, cold water and
T Fill the water tank with fresh, cold water and
reinsert it.
reinsert it.
The Coffee Grounds Container symbol ?
lights up. Cleaning the bean container
T Empty the drip tray and coffee grounds Coffee beans may be covered with a slight oil film
container and reinsert them. which remains on the walls of the bean container.
The Filter symbol ! lights up. These traces may negatively affect the coffee
! T Touch the Filter symbol to start rinsing of result. For this reason clean the bean container
the filter. from time to time.
The Y, <, > and ! symbols flash. The filter Q T Press the On/Off button to switch the
is rinsed. Water flows directly into the drip machine off.
tray. T Disconnect the mains plug.
Rinsing of the filter stops automatically. The T Remove the bean container cover.
Coffee Grounds Container symbol ? lights T Remove the coffee beans with a vacuum
up. cleaner.
T Empty the drip tray and coffee grounds T Clean the bean container with a soft, dry
container and reinsert them. cloth.
The machine heats up. Your ENA is once T Fill the bean container with fresh coffee
more ready for use. beans, then close the bean container cover.
Changing the filter without a prompt: If the filter
is activated, you can initiate the 'Changing the
filter' operation manually at any time as long as
the machine is ready for use. Touch the ; and _
symbols at the same time for approximately
2 seconds. The ;, _, L and ! symbols light up
brightly. Continue with the first prompt
(indicated by T) as described in this section.
40
de
6 Messages on symbol display
ru
41
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Coffee only comes out in Coffee or ground coffee has T Set the grinder to a coarser setting
drips when it is being been ground too finely and or use coarser ground coffee (see
prepared. is blocking the system. Chapter 1 ‘Preparing and using for the
first time – Adjusting the grinder’).
The Water Tank symbol M The water tank float is T Descale the water tank (see Chapter 5
lights up even though the trapped. ‘Maintenance – Descaling the water
tank is full. tank’).
The ; and _ symbols flash The system must be filled T Fill the water tank (see Chapter 1
alternately. with water. ‘Preparing and using for the first
time – Filling the water tank’).
T Touch the ; or _ symbol.
The system fills up with water.
Grinder is making a very loud There are foreign objects in T Contact customer support in your
noise. the grinder. country (see Chapter 11 ‘JURA contact
details / Legal information’).
When the ENA is switched on, If the machine was exposed T Warm the machine at room
the Cleaning symbol L to the cold for a long period temperature.
flashes for 5 seconds. The of time, heating is disabled
machine then switches off. for safety reasons.
42
de
8 Transport and environmentally friendly disposal
pt
ru
43
10 Index
10 Index
A E
Addresses 46 Emptying the system 43
Aroma preservation cover Energy Save Mode 34
Bean container with aroma preservation Errors
cover 27 Troubleshooting 42
B Espresso 34
Bean container F
Bean container with aroma preservation Filling
cover 27 Bean container 31
Cleaning 40 Water tank 33
Filling 31 Filter
Bus bar Changing 39
Technical data 43 Inserting and activating the filter 36
Button First-time use 31
On/Off button 27 With filter cartridge activation 32
C Without filter cartridge activation 32
Central grounding point 43 G
CLARIS Blue filter cartridge Ground coffee 35
Changing 39 Powder chute for ground coffee 28
Inserting and activating the filter 36 Grounding point 43
Cleaning H
Bean container 40 Height-adjustable coffee spout 27
Machine 37 Hotline 46
Coffee 34
Coffee grounds container 27 I
Coffee spout Instant coffee
Height-adjustable coffee spout 27 Ground coffee 35
Consistency of grind Internet 31
Adjusting the grinder 33 J
Grinder adjustment switch 28 JURA
Contact details 46 Contact details 46
Cup grille 27 Internet 31
Customer support 46 website 31
D M
Descaling Machine
Machine 38 Cleaning 37
Water tank 40 Descaling 38
Display Setting up 31
Symbol display 28 Switching off 36
Display, messages 41 Switching on 35
Disposal 43 Mains cable 27
Drip tray 27 Maintenance 37
Daily maintenance 36
Messages on display 41
44
de
10 Index
P T
Permanently setting the water for the cup Technical data 43 en
size 34 Tel 46
Permanent settings in programming mode 36 Transport 43
Powder chute Troubleshooting 42
Powder chute for ground coffee 28 U
Preparation 34 Use, First-time 31
Coffee 34
Espresso 34 V fr
Ground coffee 35 Ventilation slots 27
Ristretto 34 W
Problems Water hardness
Troubleshooting 42 Determining the water hardness 34
Programming mode 36 Setting the water hardness 37
Setting the water hardness 37 Water tank 27
Proper use 29 Descaling 40 it
R Filling 33
Ristretto 34 Website 31
S
Safety 29
Safety information 29
Settings nl
Permanent settings in programming
mode 36
Setting up
Setting up the machine 31
Switching off 36
Switching on 35
Symbol es
Cleaning 28
Coffee 28
Coffee Grounds Container 28
Coffee strength 28
Descaling 28
Espresso 28
Filter 28 pt
Ground Coffee 28
Ristretto 28
Water Tank 28
Symbol description 26
Symbol display 28
Messages 41
ru
45
J70382/ENA Micro 1/de–ru/201509
Directives
The machine complies with the following
directives:
UU 2006/95/EC – Low Voltage Directive
UU 2004/108/EC – Electromagnetic Compatibility
UU 2009/125/EC – Ecodesign Directive
UU 2011/65/EU – RoHS Directive
Technical changes
We reserve the right to make technical changes.
The diagrams used in these instructions for use are
for illustration purposes only and do not represent
the original colours of the machine. Some details
of your ENA may vary.
Feedback
Your opinion is important to us! Use the contact
details at www.jura.com.
Copyright
The instructions for use contain information which
is protected by copyright. It is not permitted to
photocopy these instructions for use or translate
them into another language without the prior
written consent of JURA Elektroapparate AG.
46