Professional Documents
Culture Documents
UNCONVENTIONAL DRILLING
PRODUCTIVITY TESTS
STUDENTS:
Petroleum engineering
Roberto Pablo De Los Santos Gomez
712
Alan Rodrigo Avila Martinez
Teacher: Ing. David Arroyo Acosta
Diana Hernandez Salazar
Table of contents
1.1 Introduction...............................................................................................................1
1.2. Production testing...............................................................................................2
1.3 Production Testing Objectives..................................................................3
1.4 Classification of production tests.............................................................4
1.4.1. Production tests in oil wells................................................................5
1.4.1.1Periodic tests...............................................................................................6
1.4.1.2Pressure restitution tests.................................................................7
1.4.2 Production tests in gas wells................................................................8
1.5 Productivity index................................................................................................9
1.6 Conclusions................................................................................................................10
1.7References..................................................................................................................11
Image index
Image 1. Production tests .............................................................................................1
Image 2. Productivity index........................................................................................9
1.1 Introducción
1
1.2 Production testing
These are tests that are carried out
in order to evaluate fundamental
parameters for the adequate
characterization of the reservoir.
For this purpose, it is necessary to
record the flowing and static
bottomhole pressures, as well as
Image 1. Production tests
the bottomhole temperatures. TETRA Technologies, Inc. (2023b, January 30). Production testing - TETRA
Technologies, Inc. Tetra Technologies, Inc. https://tetratec.com/es/oil-and-
gas-services/production-testing/
2
1.3 Production Testing Objectives
Establish the definitive production parameters
regarding the flow rate and pressures controlled at
the wellhead.
They are used to evaluate the quality of the oil and
gas produced, the efficiency of production, and the
ability of the well to maintain a constant production
rate.
3
1.4 Classification of production tests
4
1.4.1 Production tests in oil wells
They are classified into the following types:
5
1.4.1.1 Periodic tests
6
1.4.1.2 Pressure restitution tests
7
1.4.2 Production tests in gas wells
Measure the entry capacity of the formation fluids to the bottom of
the well with a maximum allowable flow rate.
In an open well, verify and record the data on bottomhole pressures,
bottomhole temperature, state of permeability, detection of the
presence of damage and the final radius of drainage of the well. To
determine these parameters, logs are run. open well taking into
account all industrial safety factors.
8
1.5 Productivity index
10
1.7 Referencias
Oscar. (08/18/2010). Production tests.
http://oilworld2008.blogspot.com/2010/08/probas-de-produccion.html
Mares, A. E. P. (2019, June 19). Well productivity using the nodal analysis technique.
https://es.linkedin.com/pulse/producttividad-de-pozos-usando-la-t%C3%A9cnica-
del-an%C3%A1lisis-p%C3%A9rez-mares
Arcentales, D. D. (2018). Considerations and importance of well testing for the
development of oil wells.
https://www.dspace.espol.edu.ec/xmlui/handle/123456789/47146
11
Thank you
12