This document contains a quiz for a Microwave Devices course with two questions. The first question asks students to determine the actual length of a stub and main transmission line using the Smith Chart to match an impedance of 120+j120 ohms on a 50 ohm transmission line operating at 5 GHz. The second question asks students to use the Smith Chart to find various parameters like the normalized load impedance position, voltage standing wave ratio, reflection coefficient, and input impedance of a 30+j75 ohm load on a 75 ohm transmission line that is 0.07 wavelengths long. The document provides the questions, relevant course and learning outcome information, and space for signatures to verify the quiz.
This document contains a quiz for a Microwave Devices course with two questions. The first question asks students to determine the actual length of a stub and main transmission line using the Smith Chart to match an impedance of 120+j120 ohms on a 50 ohm transmission line operating at 5 GHz. The second question asks students to use the Smith Chart to find various parameters like the normalized load impedance position, voltage standing wave ratio, reflection coefficient, and input impedance of a 30+j75 ohm load on a 75 ohm transmission line that is 0.07 wavelengths long. The document provides the questions, relevant course and learning outcome information, and space for signatures to verify the quiz.
This document contains a quiz for a Microwave Devices course with two questions. The first question asks students to determine the actual length of a stub and main transmission line using the Smith Chart to match an impedance of 120+j120 ohms on a 50 ohm transmission line operating at 5 GHz. The second question asks students to use the Smith Chart to find various parameters like the normalized load impedance position, voltage standing wave ratio, reflection coefficient, and input impedance of a 30+j75 ohm load on a 75 ohm transmission line that is 0.07 wavelengths long. The document provides the questions, relevant course and learning outcome information, and space for signatures to verify the quiz.
DEP50043 – MICROWAVE DEVICES QUIZ 2 (CLO 1) | TOTAL 30 MARKS | ANSWER ALL QUESTIONS
QUESTION 1 (CLO1, C3)
A 50 Ω transmission line of 6 m length is terminated by a load ZL of (120 + j 120) Ω. The line will be matched by adding a open-circuited single stub as in figure. Assume that the stub line has the same characteristic impedance as the main line. With the aid of Smith Chart, determine the actual length of d and l if the operating frequency of the line is 5 GHz. [15 marks]
QUESTION 2 (CLO1, C3)
A load impedance ZL=30 + j75Ω is connected to a line that has a characteristic impedance, Z 0 = 75Ω. By using Smith Chart, find the position of normalized load impedance, VSWR(S), angle of reflection(Ө), reflection coefficient(г), input impedance(ZIN) when the transmission line 0.07λ. [15 marks]