Professional Documents
Culture Documents
INSTALLATION REMARKS
Site Preparation
OK NOT OK
G G AC Power
G G Scorotron MPX-0128-56
2 Aug 99 2
PROPRIETARY AND CONFIDENTIAL
(For Storage Machines Only) e-Print Pro + Upgrade Checklist
INSTALLATION REMARKS
G G Monitor 17” EBC-0110-01
G G Mouse EBC-1026-01
G G Keyboard EBC-1027-02
G G PC Computer EBC-1035-53
G G Paper Chromo 135 gr. MPR-1600-09
3 Aug 99 3
PROPRIETARY AND CONFIDENTIAL
(For Storage Machines Only) e-Print Pro + Upgrade Checklist
INSTALLATION REMARKS
Check & Adjust the level of e-Print Pro
4 Aug 99 4
PROPRIETARY AND CONFIDENTIAL
(For Storage Machines Only) e-Print Pro + Upgrade Checklist
INSTALLATION REMARKS
G Verify that site’s circuit breaker is ON
WARNING: System is electrically alive. Take care not
touch any live parts inside electrical cabinet
5 Aug 99 5
PROPRIETARY AND CONFIDENTIAL
(For Storage Machines Only) e-Print Pro + Upgrade Checklist
INSTALLATION REMARKS
To WHIF_NOT_INSTALLED
Functionality Diagnostics
G Lower the Paper Feed Elevator
G Make sure that the machine is in Engaged Mode
G Open Diagnostics window
G Insert the Bypass Key
G Check following elements:
OK NOT ELEMENT MMI WINDOW
OK
G G Motor Inch Diagnostics>Substrate>Main
Motor
G G From the MMI: Diagnostics>Substrate>
Electronically engage Electronic Engage
the system (PIP &
IMP)
G G Vacuum Pump Diagnostics>Substrate>Feed
G G All Solenoids Diagnostics>Substrate>Feed
G G Lift Motor Diagnostics>Substrate>Lift
G G Drain Cooler Pump Diagnostics>Process>Machine
Temp. Control
G G Scorotron Wire Motor Diagnostics>Process>Elements
G G PTE Lamp Diagnostics>Process>Element
G G Home Wipers Diagnostics>Ink>Flow
G G Imaging Oil Add Valve Diagnostics>Imaging
Oil>Separator
G G Separator Pumps Diagnostics>Imaging
Oil>Separator
General Checks
6 Aug 99 6
PROPRIETARY AND CONFIDENTIAL
(For Storage Machines Only) e-Print Pro + Upgrade Checklist
INSTALLATION REMARKS
Adjustments and Pre-Operation Preparations
Check paper flow paths using the provided Maxpaper
for 10 sheets using:
G Simplex
G Shutdown the Machine
G Perform the e-Print Pro upgrade MKT-0820-AI
7 Aug 99 7
PROPRIETARY AND CONFIDENTIAL
UPGRADE FEEDBACK
This form should be completed immediately after implementation of the
Upgrade and sent by fax to:
ATT: Customer Support
Yiftach Estrik
Indigo
FAX: (972)-8-9381338
(972)-8-9381339
DATE (MM/DD/YY):
UPGRADE NUMBER:
MACHINE SERIAL NUMBER:
CUSTOMER NAME:
COUNTRY/STATE:
TECHNICIAN NAME:
TEL:
FAX:
TIME SPENT ON INSTALLATION:
GENERAL REMARKS: