Professional Documents
Culture Documents
>
Fuzz Face™
This is the Fuzz Face™ project know as FF5, the “5” denotes that there are at least 5 di erent versions that you can build with this project. Here they are!
For a simple project, we recommend the NPN Silicon Transistor Version. If you want to build a Germanium Transistor version, get your transistor set from Small Bear
Electronics LLC and use the resistor values that he sends with the transistors. His resistor designations (R2, etc) are not the same as the designations on these
projects. Here is the cross reference:
SBE R3 – GGG R2
SBE R4 – GGG R4
SBE R5 – GGG R5 (may not be needed if you use R5T trimmer)
SBE R6 – GGG R3
If you have a common power supply to power your pedals, the negative ground version will work with your other pedals on a common power supply. See the Charge
Pump Wrapper below to get your positive ground pedal on a common power supply with all your other pedals.
Trimmer or No Trimmer
The Germanium Transistor version and The NPN Silicon Transistor version layouts both have a 10k trimmer (R5T) that is not shown in the schematic. We believe this
is a worthy addition to the circuits, giving you more options for the ultimate sound you want. If you don’t want to use the trimmer, here is the Fuzz Face™, No
Trimmer Diagram mentioned in the Instructions le. This diagram is for the Germanium Transistor version, but the jumper is the same for the NPN Silicon Transistor
version.
Buy a FF5 Complete Kit. Includes all the parts and materials you need to build one, all for about the price you would pay for a PCB and parts.
Would you like a Ready to Solder Circuit Board for this project? Note: If you buy the kit, the Ready-to-Solder Printed Circuit Board (RTS PCB) is included in the
kit. You do not need to purchase this Ready to Solder Circuit Printed Board if you buy the kit.
Contact Us Store