Professional Documents
Culture Documents
Final Output
Final Output
Description: With an open mind, create and plan a three-storey commercial building. Also, each group
should create a 3D logo that will represent their group. Apply everything you’ve learned in ENGG 403 –
Computer Aided Design.
Required Output:
1. Floor Plan
2. Elevation Plan (Front and Rear, Left and Right)
3. Logo in 3D
Rules:
1. It should be a three-storey commercial building with a minimum lot area of 300 sq.m.
2. Floor Plan and Elevation View should be in separate paper.
3. Paper size to be used should be in ISO Full bleed A3 (420.00 x 297.00 MM) and drawing frame
should follow the following (should only be seen in LAYOUT TAB):
TEXT = 2.5 units
MARGIN = 10.0 units
TITLE BLOCK = 10.0 units
4. Layer the objects properly according to their category Ex. Doors, Windows, Columns, Beams,
Dimensions, Texts.
5. Dimensions should have circle arrowheads, texts should be centered, and precision should be
0.00.
6. Should follow the object properties below:
• After plotting all floor plans and elevation plans, please combine all PDF into a single file only. Use
the poster as your front page.
• Upload the dwg file (1) and pdf file (1) of your design in the given link.
• Only one group member will upload the output while the other group member is still required to
turn-in in the google classroom.
Note: No need to add a private comment, a deduction will be given if not followed.
Project Criteria:
Punctuality: 5%
Description: 10%
Originality: 10%
Overall Presentation: 25%
Application of the discussions and rules: 50%