Professional Documents
Culture Documents
Facilitator Name:
LIVINTHIRAN
Inspection Report
1. Purpose and objectives for the safety inspection
acts) Finding 1:
Picture 1
Preventive Actions:
To provide new safety goggle to the worker and inform him to use safety
goggle while performing cutting works
To rectify by: In 2 hours (By Today) Action by: Supervisor Santhosh
Finding 2:
Picture 2
Supervisor must only allow welding work to be carried out after assessing
the safety requirements needed to perform those works
Finding 3:
Picture 3
Preventive Actions:
Eversafe Academy
Workplace Safety and Health Management in
Construction Industry ( WSHMCI) (BL) - Project
Finding 4:
Picture 4
(Root Causes):
Lack of supervision from supervisor especially at the end of the work shift
Preventive Actions:
Supervisor need to ensure housekeeping is done properly after the end of the
work
To rectify by: In 2 hours (By today) Action by: Supervisor murali
Finding 5:
Picture 5
Preventive Actions:
● Supervisor must ensure that worker have adequate PPE and ensure
that they use the PPE while performing work
● Supervisor must carry out work only when the safety requirements
stated in the permit to work/risk assessment are satisfied.
● Supervisor must check the workplace before leaving the workplace once
worker have performed the job.
● Remind to all workforce during daily toolbox meeting about PPE and
proper housekeeping.
End of Report
Eversafe Academysan