Professional Documents
Culture Documents
LLC
Ty fo Fibr wrap Systems
® ®
Tyfo Tile-Hold ®
H istor y
®
Tile has been used as a non-structural facing The product, Tyfo Tile & Masonry Hold uses
®
material on buildings for decades. The tile is new Fibrwrap technology to produce a
bonded to the substrate using tile adhesive. In method to hold tile and masonry in place with
some cases, due to age or other problems, the minimal cost and effect on the aesthetics of
tiles will begin to work loose and could fall. the existing facade.
®
Tyfo Tile & Masonry Hold can also be used for
brick and other fascial materials.
Product Co ncept
®
New Tyfo EP fabrics have spaces between the Glass fibers are normally used for low-cost and
fiber bundles. These fabrics are manufactured less visual impact. Carbon and aramid may be
with glass, carbon or aramid fibers. used for high-strength or an architectural plan
using black or gold.
®
When used in conjunction with Tyfo WEB fabric
the product creates a facade water barrier.
2
Product Fea tures
· System holds tiles or facade in place.
· Lightweight.
· Glass system has little visual effect and tile can be seen.
®
· Uses proven Fibrwrap properties to extend the life of buildings and other structures.
M a terial S electio n
3
I n stalla tio n
1. Broom clean surface.
®
Tyfo Polymer
is a single ®
2. Apply layer of Tyfo Polymer.
component,
ultraviolet-
resistant
polymer.
®
3. Apply layer of Tyfo fabric.
®
4. Apply second layer of Tyfo Polymer.