Professional Documents
Culture Documents
To obtain the best results from the X-Ray Machine, following procedure should be observed in
Dark Room: -
1. A qualified and trained Radiographer should only be allowed to operate the
X-Ray Equipment.
2. Dark Room should be totally dark and no light should enter in the room.
3. Loading and unloading of films in the cassette should be done only in Dark Room under
standard safe light.
4. Films should be stored in Dry and Dark place.
5. The Intensifying screens should be handled with care and wet finger marks of any chemicals
should not touch the screens.
6. The Developer and the Fixer solutions should always be covered and preferably new
solutions to be prepared after every 20 days.
7. The Temperature of Developer and Fixer to be maintained between 25 to 30 Degrees.
8. Solutions should be stirred with wooden stick each time films are dipped. Separate wooden
sticks, each for developer and fixer should be used.