The weekly report summarizes work performed from July 24-28, 2023. It details: inspections of air conditions using 6-8 hours across different locations; maintenance and repair of wiring systems for 8 hours; and maintenance and service of air conditions for 6-7 hours. The total reported hours were 34. It also provides the sequence of operations for maintaining air conditions, including opening the outdoor/indoor units, washing fans, checking drainage systems, and removing dust from blowers.
The weekly report summarizes work performed from July 24-28, 2023. It details: inspections of air conditions using 6-8 hours across different locations; maintenance and repair of wiring systems for 8 hours; and maintenance and service of air conditions for 6-7 hours. The total reported hours were 34. It also provides the sequence of operations for maintaining air conditions, including opening the outdoor/indoor units, washing fans, checking drainage systems, and removing dust from blowers.
The weekly report summarizes work performed from July 24-28, 2023. It details: inspections of air conditions using 6-8 hours across different locations; maintenance and repair of wiring systems for 8 hours; and maintenance and service of air conditions for 6-7 hours. The total reported hours were 34. It also provides the sequence of operations for maintaining air conditions, including opening the outdoor/indoor units, washing fans, checking drainage systems, and removing dust from blowers.
Inspection of air conditions at NSSF office TANGA 6 Monday
Inspection of air conditions at MSD Pongwe 7
Tuesday
Maintenance and repair of wiring system at District Commissioners 8
Wednesday house
Maintanance and service of air conditions at TRA office 6
Thursday
Report writing on the inspection of an Air conditioner (AC) at TRA 7
Friday Office
Report Writing Saturday
Total hrs 34
Sequence of operations for main job
No Operation Tools, Machinery, Equipment On the maintenance of Air Condition (AC): - Tester First, we open the case of outdoor unit and wash the fans of the condenser by using water and brush vertically.
Second, we open the case of indoor unit Screw driver
and poor some water to check if there is any blockage in the drainage system.
If there is a blockage on the drainage Star and Flat
system, then we blow on outward side of the drainage pipe to remove muddy We remove dust on the blower by using Brush water and brush.