‘SUB-SURFACE PUMP: API25-225-THM-16-4-4
Serial No.-2
PRLINETTEW No,
PR LINE TEM NO.2
NOMINAL TUBING SIZE
2-7/Binch, FUE, 1-80, 65 PPF
ASIC BORE DIAMETER 21/4inch
“TYPE OF PUMP INCLUDING TYPE OF BARREL “Tubing purip, Heavy Wall Barrel
‘QUANTITY REQUIRED 20 Nos:
SAP Material code 150004032
BARREL LENGTH-OD. 36 feet - 0.0. Maximum as per APTLIAX
PLUNGER LENGTH OF feet
TOTAL LENGTH OF EXTENTIONS oa feet
"ADDITIONAL INFORMATION
GARREL MATERIAL
(Re. Table F.1, page no. 90 of API SPECIFICATION 11 AX
THIRTHTEEN EDITION, MAY 2015
ECTIVE DATE: NOVEMBER 04, 2015.
‘APY, Type Al,chrome plate on steel
Inside surface condition-0,003 inch, min
Thickness, 900 to 1160 HVice
Base core hardness — HRB 90 to HRC 23
Base material- UNS G1OXX0 steel
Base material min, yield strength, ks-60
DLUNGER METERIAL
(Ref Table F.8, page no.95 of API SPECIFICATION 11 AX
THIRTHTEEN EDITION, MAY 2015
EFFECTIVE DATE: NOVEMBER 04, 2015,
‘API Type B2,Spray metal
(Outside surface condition- 0,008 in. (0.203 mm min
thickness, 484 Vickers 200 min. hardness
Base core hardness- HRB 70 to HRC 23
‘ase materil- UNS GTOXXO/UNS G4XXXO/UNS G86XX0
Base material min. yield strength, ks-50
PLUNGER CLEARANCE (0.003 inch
Ref. Table C37—P21 page no.62 of API SPECIFICATION
11 AX THIRTHTEEN EDITION, MaY 2015,
EFFECTIVE DATE: NOVEMBER 04, 2015,
‘VALVE MATERIAL
{Ref Table F.4 page no. 93 of API SPECIFICATION 11 AX
THIRTHTEEN EDITION, MAY 2015
TIVE DATE: NOVEMBER 04, 2015.
‘APY, Type AG, Tungsten Carbide Should be fited with
Double Travelling Valve & Double Standing Valve.
Hardness:
Ball: HRA 88-89
Seat: HRA 8889.5,
Material: Tungsten with cobalt binder
LENGTH OF EACH EXTENTION Geet
NOTE:
(1) The above item should bear API Monogram and compliance to other specifications like Measurement, Testing
‘and Gauging (chapter 7), Marking (chapter 8), etc, ofthe API Specification 11 AX Thitteenth Ealtion, MAY 2015,
EFFECTIVE DATE: NOVEMBER 04, 2015 or latest must be strictly adhered to.
(2) Bidder must give details of offered items in the datasheet enclosed, which will be only used for evaluation of
technical specification,
(G.) Fach Pump should be packed in preferaaly in metalic box to prevent damage during transportation
(4) One no. of extra standing valve with complete housing/cage set, two sets of ball & seat each to be provided
‘extra with each sub-surface pump at no extra cost.
(5) Pump design, detailed diagram with part nos. & nomenclature to be supplied with each pump,
(6.) Each pumas to be supplied with set of operating and maintenance manual
(7) Copy of material Test Cerificate, Guarantee & Warranty certificate shall be produced atthe time of inspection
‘and original copy shipped along with the materials.
(8) Bidder to note thatthe items to bear API monogram,
‘TECHNICAL SPECIFICATIONS FOR SRP SUB SURFACE PUMPS AND ACCESSORIES FOR FY 2018-19