Professional Documents
Culture Documents
Cedrick Sabrine
Xfnite
Guzman St., Mandurriao
Iloilo City
https://www.facebook.com/Xfnite/
Steps:
I. 3D Task
II. Label
First Label the roof based on the house’s footprint, not by the actual triangular shape of
its roof.
On the lower left part it may look like a ground, it is the house’s balcony so you need to
label it too.
III. Vector
First we need to set our vector, only 1 vector per task, it all affect all features within a
task once you set it.
Click the Vector tool or press “3”, click an edge or a sidewall then trace the angle of the
house/building and click again to set the end point.
IV. Select
V. 3D Lines
After we Select our Label, HOLD CTRL KEY, then DRAG the label and 3D lines will
appear, after you set the 3D lines, release the mouse first, then release CTRL.