Professional Documents
Culture Documents
SOFTWARE
SESSION 2
09/17/2021 3
Stepwise guide
• Select 3D modelling
09/17/2021 4
• Now X and Y axis are shown. To view Axis,
• Click on unsave view and select SE Isometrics
09/17/2021 5
• To take UCS icon to the left side,
• type UCSICON Click enter Select noorigin
09/17/2021 6
• To create 3D object at first you will have to create 2D Sketch on XY
plane
09/17/2021 7
09/17/2021 8
• At first create the 2D sketch
• Make sure to prepare a close rectangle. If your shape is open then it will not prepare a 3D
09/17/2021 9
object
Presspull Command
• To make our rectangle to 3D we are using the press pull command
09/17/2021 10
Click on press pull
Take cursor inside the shape which you want to convert into 3D
Then it will highlight that shape, once it highlights the boundary shape then click there
Then take your cursor on the side where you want to give the thickness ( In our object that is
upside)
Now your object is seen in 2D wire frame, To give your object a solid look,
• Click on 2D wireframe and select shaded with edges
If you get grids on your 3D object switch off grid icon at the tools status bar
09/17/2021 11
09/17/2021 12
09/17/2021 13
How to create the circular hole
09/17/2021 14
Click on copy edges Select the line Press enter
• To stop the command press exit and again exit
09/17/2021 15
09/17/2021 16
To create the hole:
Click on circle command
Click on presspull
To select other portions click on multiple at command bar, and select all the remaining portions
09/17/2021 17
Press enter
09/17/2021 18
09/17/2021 19
To erase the extra edges:
Type E and select erase/ click on Select the needed edge to Click enter
erase command erase
09/17/2021 20
09/17/2021 21
To see trough the hole:
Press SHIFT + Middle mouse button and drag the mouse
or
type 3D rotate command on command bar and select the rotational axis and rotate the
object
09/17/2021 22
09/17/2021 23
Follow a similar procedure to draw the extruded rectangular portion and complete your
drawing
09/17/2021 24
THANK
YOU
09/17/2021 25