Professional Documents
Culture Documents
HYPERLOY® M1003
HYPERLOY® M1003 is a proprietary
Tungsten Carbide coating applied with the
Alphatek HVOF (High Velocity Oxy Fuel)
Process, which has been especially
developed for use in severe wear
environments.
Texture:
As sprayed: ~150 micro-inches Ra (3.75 microns)
Finish machined: 4-8 micro-inches Ra (0.1 – 0.2 microns)
Metallurgy:
Micro-hardness: Hv300g 1200 (72 HRC) Typical
Apparent Porosity (volume): < 1%
Oxide Content (volume): Typically negligible
Bond Strength (Low Carbon Steel - blasted): >10,000 psi / 70 MPa (Adhesive Failure)
Typical Max. Continuous Working Temperature: 540°C
TYPICAL APPLICATIONS
HYPERLOY® M1003 coating thickness can be several millimetres, however typically 0.15 to
0.25 mm dramatically improves the performance of many critical components in the majority
of applications as follows:
• High pressure valve sealing faces for Offshore Oil & Gas and Process Industries.
• Oil Field Equipment including down-hole tools.
• Compressor rams.
• Process rolls including steel mill.
• Aircraft landing gear
Alphatek Hyperformance Coatings Ltd. A Company Registered in England and Wales. Number 02847431.
Registered Office: A5 Cuba Industrial Estate, Bolton Road North, Ramsbottom, Bury, Lancashire. England. BL0 0NE