M 81 Design: Energy and cost efficiency: • unidirectional wire path with no • intensive spraying of drawing capstans • low energy consumption per ton of alternating bending (even with the and high-pressure cooling of the dra- produced wire drawing dies omitted) wing die holders for extended service life • reduced media consumption • drawing capstan diameter matched • highly reliable separation of drawing • long maintenance intervals and service to the wire diameter emulsion and gear oil by mechanical lives of the drawing tools for minimized • motor-driven drawing section cover sealing (long maintenance intervals) use and storage of spare parts for easy operation Technical data • extremely smooth operation and uniform max. production speed m/s 35.0 load transmission by helical precision fpm 6,200 gear finished wire dia. mm 0.8 1.6 1.8 2.3 2.6 3.0 3.5 AWG 18 14 13 11 10 8½ 7½ Increase in quality: at max. production speed m/s 35.0 31.5 31.5 20.5 17.0 12.0 7.4 • high wire surface quality due to an fpm 6,890 6,200 6,200 4,035 3,346 2,362 1,457 ideal wire path (2° inclination of gears/drawing capstans) max. production output t/a 15,000 (with 7000 h and 80 % utilization) no. of wires 1 Increase in productivity: max. inlet dia. mm 8.0 AWG 1 • high output • reduced downtime via multi-motor for inlet strength N/mm2 250 drive technology when changing finished dia. mm 1.00 ... 3.56 the wire diameter AWG 18 ... 7 ½
• NMI (NIEHOFF Machine Interface) color possible no. of drafts 11 / 13 / 15/16
touchscreen for data entry, display of drawing capstan dia. mm 4 x 355 and 4 –10 x 224 production parameters and maintenance haul-off capstan dia. mm 355 instructions drive technology with quick drawing die change system
We reserve the right to modify technical specifications according to technical improvement and advances. 03.2018