Professional Documents
Culture Documents
Info To Avail FESEM Facility@CIT1
Info To Avail FESEM Facility@CIT1
FESEM utilizes high vacuum conditions and uses electron beam to form an
image, the sample must be as per the specifications given below:
➢ Sample should be in dry condition and it can be powder, film, pellet, coating
etc.
➢ All water/volatile contents must be removed from the sample because water
would vaporize in vacuum.
➢ In case of magnetic samples, the details about the nature of the sample should
be provided to the operator before submitting the sample for FESEM analysis.
➢ Samples which are not compatible with high vacuum and samples which are
not stable for electron beam exposure cannot be analysed.
➢ For a better analysis basic details about the sample should be given.
➢ Samples received for the analysis will not be returned back. Please provide only
the required quantity of the sample for analysis (for example 200 mg of
powder).
➢ If you need the samples back after analysis, please inform us during the sample
submission itself.
Samples along with sample submission form can be submitted in person at FESEM
Lab, CIT (Room No. M146) or it can be sent to the following address
YOU CAN SEND YOUR SAMPLES TO ANY ONE OF THE FOLLOWING ADDRESS
e-mail: fesemlab@cit.edu.in
ANALYSIS CHARGES
The analysis charge is as given below and the amount has to be paid in advance
before the characterization is carried out.